• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.230-231
• /
• 2012

This paper describes a gate driver that operates numerous semiconductor switch in the solide-state pulsed power modulator. the proposed gate driver is designed to receive both the isolated drive-power and the on/off pulse signals through the transformer. Moreover, the IGBT-switch can be quickly turned off by adding protection circuit. Therefore it protects the IGBT-switch from the arc condition that frequently occurs in high-voltage pulse application. To comprehend operating characteristic of each IGBT-switch in pulse output condition, the device consisting of a high efficiency soft-switching capacitor charger and two series stacking IGBT-switch is developed. Finally, the relability of the proposed gate driver and the device for its test are proved through PSpice simulation and experiments.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.236-246
• /
• 1996

The deployment process of fully folded airbag is analyzed. The methodology of finite element modeling is presented for flat driver side airbag and 3-dimensional passenger side airbag. 'Initial metric option' is used to model 3-dimensional passenger side airbag before deployment. The deformed shapeds and pressure waveforms inside cushion evaluated from simulation are compared to the test results. The agreements between the simulation and the experiments are satisfactory, and the results of simulation are confirmed to be applied to the design of airbag module.

• 연구논문집
• /
• s.25
• /
• pp.23-29
• /
• 1995

Steering column is a typical component that may injure the driver at a frontal collision accident. To protect the driver from an impact, it is very important to study the impact absorbing behaviour of steering column. The dynamic simulation were performed for the ball sleeve type impact absorbing steering column. The simulation results show similar trends to FMVSS 203 test results. Hence using the simulation program developed in this study, it is possible to predict dynamic response of steering system which is used in design modification. Impact absorbing performance of the ball sleeve type steering column with the column angle of $21^\circC$ and $26^\circC$ satisfies the safety criterion of FMVSS 203.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.250-257
• /
• 1999

Driving simulators are used effectively for human factor study, vehicle system development and other purposes by enabling to reproduce actural driving conditions in a safe and tightly controlled enviornment. Interactive simulation requries appropriate sensory and stimulus cuing to the driver . Sensory and stimulus feedback can include visual , auditory, motion, and proprioceptive cues. A fixed-base driving simulator has been developed in this study for vehicle system developmnet and human factor study . The simulator consists of improved and synergistic subsystems (a real-time vehicle simulation system, a visual/audio system and a control force loading system) based on the motion -base simulator, KMU DS-Ⅰ developed for design and evaluation of a full-scale driving simulator and for driver-vehicle interaction.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.9
• /
• pp.149-156
• /
• 2012

The Fabric Electrode was proposed for the effective production of the display based on electrowetting in this paper and designed the source driver of flexible display which could be driven by the electrowetting cell. The electrowetting cell matrix was implemented on the substrate(PET) by imprinting. The driver fabric, wetting electrode fabric and conductive fabric was placed horizontally and vertically in the groove between cell matrix and the electrowetting cell matrix can be driven by the cross-point as electric connection. The integration density of driver module is decreased because using the R/2R DAC module per channel in the conventional method. The proposed method could utilize the effective production process and reduce the production price of a display panel. The source driver which consume lower power and can increase the integration density because of reducing the number of driver device per channel was designed and evaluate the driver operation by the simulation using the VHDL programming in this paper.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.21-29
• /
• 1995

The automotive transmission is the principal component of the power transmission system which converts the engine power into the adjustable power for the vehicle driving system. To the unskilled driver the automization of transmission is required for the safety and fuel economy. In this study, the dynamic model of the automotive power transmission system was presented and simulation program and interface board which interface IBM-PC with ECU was devloped. Through the traveling simulation by interfacing ECU with simulation program, the shifting transients are investigated. For verification of simulation experiment was carried out, the results of simulation was agreed well with those of simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.9
• /
• pp.1286-1293
• /
• 2014

Typically, studies through the simulation system have been progressed, because the evaluation of the driver's arousal state about the service of a actual train has risk of safety for the driver. When configured event same as the real in simulation system, the ability to cope with an accident situation may be the same each other. But the difference in the state of tension or arousal will occur. In this study, requested to cooperate with the railways in order to escape from these constraints, and the target of the experiment was to real engineer service. I was set about experiment when the train was stopped as safe as possible. As a result, the beta wave of EEG signals that representing complex calculations or anxiety is increased rapidly on the basis of a flag station from at the time of departure. The size of the electrodermal activity signal in response to movement of the body gave a noticeable. In terms of HRV, if the train approach a flag station gradually and the R-R interval is narrowed. So that the driver can be estimated as arousal state. In accordance with this study, if the quantitative standard of arousal state be based on the driver's biosignals will provide, it will be able to take advantage of development the system that would prevent train accidents caused by human error.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.2
• /
• pp.167-173
• /
• 2002

The VMSS(Virtual Makeup Simulation System) is a virtual simulation system which can apply makeup, hair style, accessory to user's own face image through internee connection. The simulation result can be stored to server side DB and also can be printed out on client side printer. It is implemented using Java so, clients don't need any other client program to run the VMSS except Web browser and Java Plug-in installed on browser. IIS (Internet Information Server) Web server of Window 2000 and MS-SQL 7 are used to develop the overall system. Commercial JDBC Driver Type 4 is used to connect the applet and DB. It suggests a new direction of Web-based contents service development and can be applied to many other areas.

• Korean Journal of Culture and Social Issue
• /
• v.20 no.4
• /
• pp.391-414
• /
• 2014

This driving simulation study examined the effect of driver's state driving anger(SDA) on collision avoidance(CA) and situation awareness(SA), as well as the moderating effect of driver's positive and negative affect(PA and NA) on the relationship between the driver's SDA and SA. The results showed the followings. First, high SDA group collided with the leading vehicle more frequently than low SDA group. Second, neither the driver's trait driving anger(TDA) nor PA/NA yielded significant changes in SA after SDA was induced. Third, high SDA tended to lower SA but this tendency was observed only when the driver's NA was high. These results suggested that SDA than TDA is a significant deteriorating factor of the driver's SA, and more importantly, SDA should be considered with other affect-relating variable such as NA in explaining the effect of SDA on driver's SA and CA.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.213-222
• /
• 2018

This study was conducted to derive the traffic accident risk index through the recognition of the elderly driver's driving pattern to reduce the traffic accident rate of elderly drivers and to reflect them in the renewal and return policy of driver's license accordingly. First, the traffic accident risk index is defined by analyzing the behavioral characteristics of older drivers to derive the major factors that lead to traffic accidents. Second, we present a method to measure the traffic accident risk index from the driving pattern of the elderly through the smart-phone, the camera and the distance sensor attached to the car. Finally, we derive three thresholds by computer simulation and determine the accident risk from the measured traffic accident risk index as four steps and suggest ways to ensure safe driving of older drivers. It is required to objectively assess the driving ability of an aged driver in accordance with the proposed method, and to induce the driver to reset the driver's license renewal cycle and voluntarily return the driver's license to minimize social costs due to increased traffic accidents.