• Korean Journal of Health Education and Promotion
• /
• v.26 no.4
• /
• pp.49-62
• /
• 2009

Objectives: Few studies have focused on health behaviors and health status among teachers even though these are one of principles and values of WHO's Health Promoting Schools. In this study, we described health behaviors and health status among teachers and explored the differences of these by personal and school characteristics. Methods: A stratified and random cluster sampling design was used to obtain a cross-sectional sample. A total of 59 elementary, middle and high schools in Seoul and Gyeonggi areas were included in which 333 teachers (males 40.6%, females 59.4%) participated in this survey. Chi-square tests were conducted with SPSS 17.1. Results: Overall, health behaviors and health status among teachers were better than the general public according to Korea National Health and Nutrition Examination Survey. Male and middle/high school teachers had higher prevalence of alcohol dependence and of driving under the influence of alcohol. Also, their rate of wearing seat belts were lower compare to female. In other hand, female, health and nutrition teachers, rural school teachers had lower prevalence of meeting recommended levels of physical activity. Underweight were more prevalent to them in contrast to male with higher prevalence of obesity. In addition, teachers of health promoting schools were not likely to ride on a car with a drunk driver. They also have a lower prevalence of skipping breakfast and have higher positive perception of health for themselves. Conclusion: Teachers' health should be given higher concerns as a key component of school based health promotion. Gender and age specific programs should be considered to develop health promoting programs for them.

• Korean Journal of Legislative Studies
• /
• v.24 no.2
• /
• pp.5-38
• /
• 2018

A seismic change is under way in diplomatic topography surrounding the Korean Peninsula. A new dynamic is being generated that could lead to a breakthrough in the nuclear stalemate and to an end of hostility between the two Koreas. Moon Administration's bold and creative foreign policy, which is alleged to place South Korea in the "driver's seat", is probably responsible for what is happening on the Korean Peninsula. However, on the other hand, Moon Administration's foreign policy shows a lot of continuity with foreign policy of previous conservative governments. In particular, the Moon government's emphasis on the vitality of the ROK-US alliance and its commitment to close coordination with the US in dealing with nuclear issues of North Korea is the hallmark of the continuity in South Korea's foreign policy. Emphasizing and sharing the notion of the continuities in foreign policy could contribute to social integration by garnering bi-partisan support. It could also spawn sense of stability, predictability, and confidence to diplomatic counterparts in other countries. And it could help avoid the negative effects of expectation-reality gap in the event that the outcome of all the diplomatic endeavor falls short of expectation held by citizens.

• English & American cultural studies
• /
• v.18 no.4
• /
• pp.33-64
• /
• 2018

Through the experimental narrative construction by authorial divinity, Muriel Spark's novels and films based on her fiction show the difficulty of living like a human being under various inhumane and manipulative circumstances of the modern capitalistic society. By adopting flash-forward, self-reflection, and deceptive omnipotent viewpoints, her work has surprisingly predicted the post-modern trend in which humans are increasingly attracted and interpellated to the digitalized media. Muriel Spark called the recent anesthetic situation by stimulation "a driver's seat" because it is a symbol of how humans should act to maintain the critical subject. Emphasizing the value of self-reflection, religion and morality in the mechanized society, Muriel Spark stressed literature should play the role of helmsman who sails safely in the rough sea. In Muriel Spark's works, God is often synonymous with writers. As a Jewish immigrant she experienced alienation in Scotland, marital violence, prejudices of the London-based publishing world, Nazism, and Watergate. For her, the harsh reality of the modern society needs to be guided and complemented by something beyond human control. But rather than relying entirely on traditional Catholic doctrines such as Graham Greene and Evelyn Waugh, Muriel Spark has taken a personal, religious view of literature and insists that the genuine writer must play God's play. Seeking for the speculative vision for the future of human life in God's plan, she tries to understand the complex twisted motives of human beings which are often far from the ideal form. Simply put, her search of self-reflection, religion and ethics is modeled on the God's plan for the ideal human being who is supposed as the writer with the transfigurative imagination of the trinity.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.137-145
• /
• 2022

Objectives: This study aimed to identify PM₁₀ mass concentration levels and conduct peak identification during five tasks in agricultural works. Methods: We investigated five agricultural tasks in 12 farms, which were harvesting, plowing, sowing, planting, and decapitation. All samples were measured by using the portable aerosol spectrometer(PAS 1.108) and the aerosol monitor(SidePak AM520). The collected data were compared with the national PM₁₀ concentrations. They were calculated to descriptive statistics, independent t-test, or ANOVA, and the peak identification on time series graph. Results: The ten investigated farms showed no significant difference with the national PM₁₀ concentrations, but the two greenhouses(AM, 143.31, 85.16 ㎍/m³) showed significant difference(p<0.05). As a result of the peak identification, the harvesting tasks showed repeated peak occurrence with the background concentration level of about 50 ㎍/m³. For plowing and sowing tasks, the peak occurred intermittently when the working was conducted near the sampling sites. Among the five tasks, the arithmetic mean of the harvesting task was 138.84±294.71 ㎍/m³, which was significantly higher than the other tasks(p<0.05). In addition, the case of using a tractor was higher than the case of not using the tractor(p<0.05), and the driver's seat showed the highest concentration(AM, 95.81 ㎍/m³). Conclusions: Works in greenhouses might have exposure to PM₁₀, while outdoor works is similar to general atmospheric PM₁₀ concentration levels. However, there is a possibility of intermittent exposure to high concentrations of PM₁₀ depending on the characteristics of agricultural tasks.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1109-1116
• /
• 2014

The wheelchair mechanism for a car that is proposed in this study primarily consists of a transfer mechanism and storage mechanism. The wheelchair transfer mechanism consists of a manipulator installed in the roof of a car, and performs the function of transferring the wheelchair from the driver's seat to the trunk. The wheelchair storage mechanism consists of a lifting hoist installed in the trunk of car, and performs the function of storing the transferred wheelchair in the trunk and safely fastening it in place. This study analyzed and reviewed various manipulators, including a vertical type, Scara type, and telescopic type, with the goal of selecting the best type of manipulator for the wheelchair transfer mechanism. The telescopic type was selected and applied because of its good load support and storage capabilities. In addition, with regard to the wheelchair storage mechanism, a slide hoist type that used a slide rail and lift wire and a rotating link hoist type that used a rotating mechanism consisting of a worm gear and link were analyzed and reviewed. The slide hoist type was selected and applied because it had an advantage in relation to trunk space utilization. This study proposed a wheelchair transfer mechanism for a car to support a conventional wheelchair user's movements, and in order to conform to the structure of a domestic welfare car for the disabled.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.224-229
• /
• 2008

This study was aimed to minimize the impact force and vibration transmitted to the transporting materials from the trailer and wheel shaft by installing the leaf spring suspension device at the space between the wheel shaft and frame of power tiller trailer. The developed trailer equipped with leaf spring suspension device was compared to the existing trailer without suspension device, in order to identify the vibration absorption effect of the leaf spring. The results of this study could be summarized as follows; (1) The length and the maximum bending amount of the leaf spring were designed as 1,000 mm and 42 mm, respectively, considering the possible space for installing at below the trailer. When 4 leaf springs were installed on both wheel shafts, the allowable maximum load was identified as 9,418 N. (2) The average vibration accelerations for the frequency less than 20 Hz, where the severe transporting loss could be represented, were $0.017\;m/s^2$ and $0.133\;m/s^2$ for the developed and the existing trailer, respectively, showing the vibration absorption effect of about 87%. And the average vibration accelerations on the driver's seat for the frequency less than 20 Hz were $0.01\;m/s^2$ and $0.20\;m/s^2$ for the developed and the existing trailer, respectively, which showed the similar vibration absorption effect. (3) The change of the average vibration accelerations for the frequency from 20 Hz to 80 Hz showed the similar tendency with the result for the frequency less than 20 Hz, but the effect for developed trailer was reduced slightly. And the effect of vibration absorption for the above 80 Hz was reduced highly. However, by installing the leaf spring suspension device at the trailer, the low frequency below 40 Hz, which could affect on transporting loss severely, could be reduced highly. (4) The maximum vibration acceleration for the frequency less than 20 Hz were $0.027\;m/s^2$ and $1.267\;m/s^2$ for the developed and the existing trailer, respectively. And the change of maximum acceleration between 20 Hz and 120 Hz was showed similar tendency with the result for the frequency less than 20 Hz, but the width of change was reduced highly.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.9-14
• /
• 2020

This paper is a purpose to study the failure examples for a large bus vehicle fire. The first example, the researcher certified the fact that the absorbing material break away from the upper side of engine room because of weaken durability and the fire was produced in engine. The second example, it sought the fact that the fire breaks out by electric short because of over-load of compressor. The third example, it found the fact that the fire took place by heating of bellows upper part that was connected with muffler and exhaust manifold. The fourth example, it knew the fact that the fire occurred because of the electric short inside junction box of crash body part that was located to driver seat rightside. Therefore, the fire of a large bus occurring by decrepit of absorbing material and electric short have to thoroughgoingly manage the damage and dangerousness if it happens.

• Journal of Acupuncture Research
• /
• v.36 no.1
• /
• pp.12-20
• /
• 2019

Background: This study was conducted to verify the effectiveness and effectiveness-related factors of Korean medicine (KM) treatment for patients who have been involved in traffic accidents (TA). Methods: The medical records of 150 TA patients hospitalized in Dongguk University Bundang Oriental Medicine Hospital from September 2017 to May 2018 were reviewed. Medical records included information on patient demographic characteristics, TA situations, use of KM treatment, clinical characteristics, 4 scales [numeric rating scale (NRS), visual analogue scale (VAS), EuroQol-visual analogue scale (EQ-VAS) and neck disability index (NDI)]. Statistical analyses were performed to determine the effectiveness and effectiveness-related factors of treatment. Results: The 150 patients (almost 1:1 gender ratio) were typically in their 40's (26.67%), had rear impact to their vehicle (37.33%), were in the driver's seat (70.00%), and without head trauma and loss of consciousness (83.33%). The main symptoms were neck pain (60.66%) and lower back pain (54.00%). All 150 patients showed significant improvement after KM treatment. 4 scales significantly improved when the treatment started within 3 days from the accident and patients were hospitalized longer and took more diverse treatments. The patients experiencing a higher initial pain level (NRS 8-10, $VAS{\geq}70$) showed significant improvement of NRS and VAS scores with faster and longer inpatient treatments than the other patients. The patients with higher initial pain levels ($VAS{\geq}70$) also showed significant improvement in EQ-VAS scores. Conclusion: KM treatment was effective for TA patients in this study. Treatment initiation time, hospitalization period, treatment diversity and initial pain level are related to the degree of improvement of a patient's symptoms.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.396-403
• /
• 2018

In this paper, a high-performance and low-noise centrifugal fan is developed for cooling automotive seats which provide a driver with pleasant driving environment. First, the flow characteristics of the existing fan unit was analyzed using a fan performance tester and CFD (Computational Fluid Dynamics) simulations. The analysis of the predicted flow field indicated vortex flow near the tip of fan hub and stagnation flow on the top of fan hub. Two design points are devised to reduce the vortex flow and the stagnation flow observed in the existing fan unit. First, the cut-off clearance which is the minimum distance between the fan blade and the fan housing is increased to reduce the vortex strength and, as a result, to reduce the overall sound pressure level. Second, the hub shape is more modified to eliminate the stagnation flow. The validity of proposed design is confirmed through the numerical analysis. Finally, a prototype is manufactured with a basis on the numerical analysis result and its improved flow and noise performances are confirmed through the P-Q curves measured by using the Fan Tester and the SPL (Sound Pressure Level) levels measured in the anechoic chamber.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.154-164
• /
• 2011

This study was conducted to develop the semi-crawler type mini-forwarder that can be operated comfortable small-scale logging operation in the steep terrain and also used at a variety of operations such as the civil work in erosion control and forest-road. Considering the minimum turning radius and the width of forest operation road, the total length, width and loading capacity of the semi-crawler type mini-forwarder is 5,750 mm, 1,900 mm and $2.5m^{3}$, respectively. The maximum engine power is 96ps at 3600 rpm. Selected hydraulic pumps are consists of two main pumps and two sub-main pumps. Main hydraulic pumps are utilized to running motor of the front wheel and rear crawler. Sub-main pumps are utilized to the actuation parts such as steering, crane, out-rigger and dump cylinder. The transmission was adapted as the HST (Hydro-Static Transmission) system. The driving parts are designed and manufactured as the front wheel type and the rear crawler type. The steering type was manufactured as the ackerman type. Driving control parts type was designed and manufactured as driver's seat type of normal cars. It is also attached on auxiliary equipments such as winch, log grapple and out-rigger. The traveling speed of the semi-crawler type mini-forwarder in forest road was 5.3 km/hr to 7.7 km/hr.