• 한국지반공학회논문집
• /
• 제31권1호
• /
• pp.15-24
• /
• 2015

본 논문에서는 지반 시추시 공벽붕괴 방지를 위해 적용되는 시추 안정액(drilling fluid)의 다양한 배합설계에 따른 공벽붕괴 방지 효과에 대한 실험적 연구 결과를 다루었다. 이를 위해 먼저 벤토나이트 계열 안정액의 공벽 붕괴 방지 메카니즘을 검토하였으며 아울러 벤토나이트계 안정액의 배합(conditioning)에 따른 안정액의 성능지표 변화에 대한 실험결과를 간략히 기술하였다. 또한 지반시추(굴착) 및 안정액 투입을 간략히 모사하는 토조 장치를 구축하여 세립분이 20% 포함된 화강풍화토 및 모래지반을 대상으로 다양한 배합으로 조성된 벤토나이트계 안정액에 대한 실험을 수행하고 안정액 투입량, 수평 침투범위, 굴착가능 깊이 등을 측정하여 공벽붕괴 방지 효과를 고찰하였다. 그 결과 벤토나이트에 폴리머를 추가할 경우 안정액 투입량 및 수평 침투범위가 굴착가능 깊이가 증가하는 것으로 나타났으며 폴리머의 공벽유지 기능 향상 정도는 모래층보다 화강풍화토 지반에서 보다 뚜렷하게 발휘되는 것으로 검토되었다. 본 논문에서는 도출된 연구결과가 실무적 차원에서 지니는 의미에 대한 내용을 기술하였다.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.277-280
• /
• 2017

Destablization and demulsification is a difficult task for the treatment of waste oil-in-water drilling fluid because of its "three-high" characteristics: emulsification, stabilization and oiliness. At present, China is short for effective treating technology, which restricts cleaner production in oilfield. This paper focused on technical difficulties of waste oil-in-water drilling fluid treatment in JiDong oilfield of China, adopting physical-chemical collaboration demulsification technology to deal with waste oil-in-water drilling fluid. After oil-water-solid three-phase separation, the oil recovery rate is up to 90% and the recycled oil can be reused for preparation of new drilling fluid. Meanwhile, harmless treatment of wastewater and sludge from waste oil-in-water drilling fluid after oil recycling was studied. The results showed that wastewater after treated was clean, contents of chemical oxygen demand and oil decreased from 993 mg/L and 21,800 mg/L to 89 mg/L and 3.6 mg/L respectively, which can meet the requirements of grade one of "The National Integrated Wastewater Discharge Standard" (GB8978); The pollutants in the sludge after harmless treatment are decreased below the national standard, which achieved the goal of resource recovery and harmless treatment on waste oil-in-water drilling fluid.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.29-37
• /
• 2014

Non-Newtonian fluid mechanics takes charge of an important role in the oil industries. Especially in the oil well drilling process, the drilling fluid such as mud keeps the drill bit cool and clean during drilling, with suspending drill cuttings and lubricating a drill bit. The purpose of this study is to examine the effect of fluid mud rheological properties to predict different characteristics of non-Newtonian fluid in the mud mixing tank on offshore drilling platforms. In this paper, ANSYS fluent package was used for the simulation to solve the hydrodynamic force and to evaluate mud mixing time. Prediction of the power consumption and the pumping effectiveness has been presented with different operating fluid models as Newtonian and non-Newtonian fluid. The comparison between Newtonain mud model and non-Newtonian mud model is confirmed by the CFD simulation method of drilling mud mixing tank. The results present useful information for the design of the drilling mud mixing tanks and provide some guidance on the use of CFD tool for such non-Newtonian fluid flow.

• 한국지반신소재학회논문집
• /
• 제15권4호
• /
• pp.43-52
• /
• 2016

본 논문에서는 지반 시추 시 공벽붕괴 방지를 위해 사용되는 안정액의 다양한 배합비에 따른 공학적 특성에 대한 실험적 연구를 다루었다. 이를 위해 먼저 배합수가 청수일 경우, 안정액의 공학적 특성을 검토하였으며 아울러 해수 배합시 안정액의 공학적 성능 변화에 대한 공학적 특성을 분석하였다. 그 결과, 청수에서 벤토나이트와 폴리머를 추가할 경우 공학적 성능이 향상되는 것으로 나타났으며, CMC에 비해 Polymer의 증점 효과가 우수한 것으로 검토되다. 또한 해수의 경우 벤토나이트에 비해 내염성점토의 내염성 성능이 우수한 것으로 검토되었다. 따라서 본 논문에서는 시공시 배합수에 따른 안정액을 성능에 대한 정성적인 결과를 제시하였다.

• 한국지반신소재학회논문집
• /
• 제15권4호
• /
• pp.53-62
• /
• 2016

본 논문에서는 해상 시추 시 공벽붕괴 방지를 위해 적용되는 시추 안정액(drilling fluid)의 다양한 배합설계에 따른 공벽붕괴방지 효과에 대한 실험적 연구 결과를 다루었다. 이를 위해 내염성점토와 벤토나이트 안정액의 공벽 붕괴 방지 성능을 비교하였으며 아울러 첨가제 혼합 시 안정액의 성능지표 변화에 대한 실험결과를 간략히 기술하였다. 또한 지반시추(굴착) 및 안정액 투입을 모사하는 토조 장치를 구축하여 세립분이 포함된 화강풍화토 및 모래지반을 대상으로 해수에 배합된 다양한 안정액에 대한 실험을 수행하고 안정액 투입량, 굴착가능 깊이 등을 측정하여 공벽붕괴 방지 효과를 고찰하였다. 그 결과 내염성 점토와 벤토나이트 모두 폴리머 첨가시 공벽붕괴 방지효과가 단일 안정액에 비해 증가하는 것으로 검토되었으며 첨가제로 CMC보다 폴리머가 우수한 것으로 검토되었다. 본 논문에서는 도출된 연구결과가 실무적 차원에서 지니는 의미에 대한 내용을 기술하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.1068-1072
• /
• 1997

This work deals with on investigation the influence of various additives to a base stock cutting fluid in order to develop a better deep hold drilling. This investigation has been aiming at developing an oil which gives a maximum cutting efficiency at a minimum wear rate of the tool and the guiding pads. The purpose of study is to analyze how guide pad of tools, workpiece and the change of contained quantity of extreme pressure additive in cutting fluids have effects on the hold over size of cutting hole, surface roughness of workpiece,wear rates of guide pad and roundness during the deep hole machining of SM55C with solid BTA drill by using BTA drilling system through experiment. Conclusion reached is as follows. It has been proved that the contained quantity of surphur more affects machinability than that of extreme pressure additive of chlorine of cutting fluid in BTA drilling during Deep Hole Drilling. Considering its base oil, the the contained quantity of extreme pressure assitive of surphur can be different, but it's judged that the range of 1.5 ~ 2.0% is suitable to machinability for workpiece in BTA drilling. Regarding guide pad, it's judged that the reduction of wear is possible in propotion to the contained quantity of exrreme pressure additive of chlorine against supporting of cutting force and Bumishing operation of machining parts in cutting.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.763-772
• /
• 2021

Drilling Mud Treatment Systems are widely used for Oil Gas drilling mud circulation, horizontal directional drilling mud recycling, geothermal drilling, mining, coal exploration drilling, water well drilling. Degasser is a device used in drilling to remove gasses from drilling fluid which could otherwise form bubbles. For small amounts of entrained gas in a drilling fluid, the degasser can play a major role of removing small bubbles that a liquid film has enveloped and entrapped. As with the desander, its purpose is to remove unwanted solids from the mud system. The smaller cones allow the desilter to efficiently remove smaller diameter drill solids. In this study, a simulation study is conducted on the degasser of the facility in the Mud Treatment System to conduct a performance review on the gas separation in the mud.

• Geomechanics and Engineering
• /
• 제7권5호
• /
• pp.553-567
• /
• 2014

Borehole instability during drilling process occurs frequently when drilling through shale formation. When a borehole is drilled in shale formation, the low permeability leads to an undrained loading condition. The pore pressure in the compressed area near the borehole may be higher than the initial pore pressure. However, the excess pore pressure caused by stress concentration was not considered in traditional borehole stability models. In this study, the calculation model of excess pore pressure induced by drilling was obtained with the introduction of Henkel's excess pore pressure theory. Combined with Mohr-Coulumb strength criterion, the calculation model of collapse pressure of shale in undrained condition is obtained. Furthermore, the variation of excess pore pressure and effective stress on the borehole wall is analyzed, and the influence of Skempton's pore pressure parameter on collapse pressure is also analyzed. The excess pore pressure decreases with the increasing of drilling fluid density; the excess pore pressure and collapse pressure both increase with the increasing of Skempton's pore pressure parameter. The study results provide a reference for determining drilling fluid density when drilling in shale formation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.953-956
• /
• 1997

Micro drilling characteristics by EDM method was investigated. In detail, Micro tool electrode for EDM drilling was machined by use of WEDG method and micro hole was drilled using the machined tool electrode in SUS plate. The machining accuracy and time was compared in a different dielectric fluid. As a result, it was convinced that this method could be utilized as a fabrication technology of micro mold or micro 3 dimensional parts.

• 한국지반신소재학회논문집
• /
• 제16권2호
• /
• pp.183-194
• /
• 2017

지반을 굴착하여 시추공을 형성할 때 공벽을 중심으로 응력의 재분배가 이루어지고 이 때 시추 안정액을 활용하여 공벽에 응력의 평형을 이룸으로써 공벽의 안정성을 유지한다. 시추공 내에 주입하는 시추 안정액이 시추공의 안정성을 유지하기 위한 압력의 상한과 하한의 범위를 Mud window라고 정의하고 다양한 이론에 의해 계산된다. 본 연구에서는 수치해석을 활용하여 시추공의 안정성을 분석하여 Mud window를 작성하고 이론값과 비교 분석하여 모델링에 대한 검증을 수행하였다.