• 한국터널지하공간학회 논문집
• /
• 제22권3호
• /
• pp.277-291
• /
• 2020

쉴드 TBM은 기존 재래식 터널(Drill and Blast)에 비하여 터널을 굴착하는 지반 및 선형조건에서 적용범위가 넓은 공법으로 대단면, 대심도, 초연약지반에서의 터널링 공법으로 중요성이 부각되고 있으며, 현재 13.3 m의 대구경 slurry 쉴드 TBM이 한강 하부 통과를 위한 시공을 준비하고 있다. 쉴드 TBM은 이수압식과 토압식 쉴드 TBM으로 구분되고, 각각의 특성에 따라 시공 중 관리 항목이 달라진다. 본 논문에서는 연약지반에 주로 시공되는 이수압식 쉴드 TBM을 대상으로 장비형식, 발생기원, 적용 사례 및 트러블 사례를 분석하였다. 또한, 적정 챔버압, 장비 전방으로의 이수 분출(또는 누수)가능성을 토피고 조건에 따라 2D 및 3D 모형실험 실시하였다. 이를 토대로 연약지반 조건에서 이수압식 쉴드 TBM 시공 시 적정 굴진면 토압과 챔버압 예측을 위한 기초 및 참고자료 제공 그리고 토피고 조건에 따른 이수분출 위험 높이를 제안하여 이수분출로 인한 안정성 및 환경요인 저하원인을 최소화하기 위한 방안을 제안하였다.

• 한국산림과학회지
• /
• 제31권1호
• /
• pp.37-42
• /
• 1976

본시험(本試驗)은 천보산지역(天寶山地域)의 황폐지(荒廢地)에서 효과적(效果的)인 지피식생(地被植生) 조성방법(造成方法) 구명(究明)코자 실시(實施)되었다. 이 지역(地域)은 심한 면상침식(面狀浸蝕)이 일어난 곳으로서 모재(母材)는 화강편마암(花崗片麻岩)으로 매우 침식위험(浸蝕危險)이 높다. 참싸리, 새, 아까시나무가 공시초목(供試草木)으로 사용 되었고 삽종방법(揷種方法)은 산파(散播)거적피복(被覆)과 산폐무피복(散廢無被覆), 조파(條播) 10cm와 조파(條播) 20cm, 점파(點播) 20cm와 점파(點播) 30cm 이상(以上) 3파종(播種) 6처리(處理)였다. 1. $30^{\circ}$이하(以下)의 경사지(傾斜地)에서는 산파(散播)거적피복방법(被覆方法)이 가장 효과적(效果的)이었다. 2. $30^{\circ}$이상(以上)의 급경사지(急傾斜地)에서는 조파(條播) 10cm가 효과적(效果的)이었다. 3. 토성(土性)은 토양수분(土壤水分)을 조절(調節)하여 식생조성(植生造成)에 영향을 준 것 같다. 피복도(被覆度)와 생중량(生重量)은 토양중(土壤中)의 세토량(細土量)과 함께 증가(增加)하였다. 4. 해가 지남에 따라 피복도(被覆度)는 생중량(生重量)과 함께 증가(增加)하였으나 생립본수(生立本數)는 감소(減少)하였다.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2197-2202
• /
• 2011

본 논문에서는 중공을 가지는 짧은 치과용 임플란트의 생체역학적인 특성을 3차원 유한요소해석을 통하여 분석하였다. 고려된 치과용 짧은 임플란트는 골유착성을 향상시키기 위해 트리패닝 드링 등에 의해 남겨진 치골과 결합될 수 있는 중공부를 가진다. 연구를 위해 Bicon사의 길이가 짧은 임플란트를 기본 모델로 삼아 중공부가 임플란트 주변 치골의 응력분포에 주는 영향을 분석하였다. 중공부 길이, 직경 및 나사산 등의 형상변수에 따른 반복적인 유한 요소해석을 효과적으로 수행하기 위하여 ANSYS APDL을 이용하여 매개변수화된 유한요소모델을 구성하였다. 해석결과 중공부를 가지는 경우 특히 경사하중 하에서 해면골에서 발생하는 최대응력값이 크게 감소하였으며, 중공부의 형태가 해면골에서의 응력분포에 큰 영향을 주는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제35권6호
• /
• pp.789-798
• /
• 2020

The effect of Chitosan (CS), Carbon Nanotube (CNT) and hybrid (CS-CNT) fillers on the natural frequency of drilled composite plate is investigated by experimentally in this study. The numerical validation is also made with a program based on Finite Element Method (SolidWorks). Nine types filled and one neat composite plates are used in the study. The fillers ratios are 1% CS, 2% CS, 3% CS, 0.1% CNT, 0.2% CNT, 0.3% CNT, 1% CS+0.3% CNT, 2% CS+0.3% CNT, 3% CS+0.3% CNT. The specimens cut to certain sizes by water jet from the plates 400 mm × 400 mm in dimensions. Some of them are drilled in certain dimensions with drill. The natural frequency of each specimen is measured by the vibration test set up to determine the vibration characteristic. The vibration test set up includes an accelerometer, a current source power unit, a data acquisition card and a computer. A code is written in Matlab^® program for the signal processing. The study are investigated and discussed in four main points to understand the effect of the fillers on the natural frequency of the composite plate. These are the effect of fillers contents and amounts, orientation angles of fibers, holes numbers and holes sizes. As results, the natural frequency of the plate with 1% CS and 0.1% CNT hybrid filler is lower than those of the plates with other fillers ratios for 45° orientation angle. Besides, in the composite plate with 0° orientation angle, the natural frequency increases with increasing the filler ratio. Moreover, the natural frequency increases until a certain hole number and then it decreases. Furthermore, the natural frequency is not affected until a certain hole diameter but then it decreases.

• 대한관절경학회지
• /
• 제2권1호
• /
• pp.45-50
• /
• 1998

Recently, a variety of arthroscopic techniques have been reported for the treatment of the displaced tibial eminence fracture. The purpose of this study was to describe details of arthroscopic technique using pull-out wire and to evaluate the results. Eleven patients with irreducible type II and type III tibial eminence fractures underwent the arthroscopic reduction and internal fixation using double strand pull-out wiring. The anterior cruciate ligament tibial drill guide was utilized for the reduction of fracture and passage of the guide pins. The tibial eminence fracture was firmly fixed with double strand 26-gauge pull-out wire(0.45mm diameter). Fracture union was achieved at 7.2 weeks (range, six to eight weeks) after operation. All cases were united at the last follow-up. Subjectively, nine patients had no pain and no restriction of daily activities. Two patients with combined injuries had limitation of knee motion(10 to 130 degrees, respectively) and one patient showed mild anterior laxity. Early rehabilitation was enabled without loss of reduction and breakage of pull-out wire. The arthroscopic reduction and internal fixation using pull-out wire showed good results including early rehabilitation, early fracture union, minimal morbidity, and no requirement of the second operation for hard ware removal.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.457-463
• /
• 2013

PURPOSE. The purpose of this study was to compare the effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement. MATERIALS AND METHODS. Fifty-five incisors extracted due to periodontal problems were used. All teeth were instrumented using a set of rotary root canal instruments. The post spaces were enlarged for a No.14 (diameter, 1.4 mm) Snowlight (Abrasive technology, OH, USA) glass fiber reinforced composite post with matching drill. The teeth were randomly divided into 5 experimental groups of 11 teeth each. The post spaces were treated with the followings: Group 1: 5 mL 0.9% physiological saline; Group 2: 5 mL 5.25% sodium hypochlorite; Group 3: 5 mL 17% ethylene diamine tetra acetic acid (EDTA), Group 4: 37% orthophosphoric acid and Group 5: Photodynamic diode laser irradiation for 1 minute after application of light-active dye solution. Snowlight posts were luted with self-adhesive resin cement. Each root was sectioned perpendicular to its long axis to create 1 mm thick specimens. The push-out bond strength test method was used to measure bond strength. One tooth from each group was processed for scanning electron microscopic analysis. RESULTS. Bond strength values were as follow: Group 1 = 4.15 MPa; Group 2 = 3.00 MPa; Group 3 = 4.45 MPa; Group 4 = 6.96 MPa; and Group 5 = 8.93 MPa. These values were analysed using one-way ANOVA and Tukey honestly significant difference test (P<.05). Significantly higher bond strength values were obtained with the diode laser and orthophosphoric acid (P<.05). There were no differences found between the other groups (P> .05). CONCLUSION. Orthophosphoric acid and EDTA were more effective methods for removing the smear layer than the diode laser. However, the diode laser and orthophosphoric acid were more effective at the cement dentin interface than the EDTA, Therefore, modifying the smear layer may be more effective when a self-adhesive system is used.

• 비파괴검사학회지
• /
• 제30권4호
• /
• pp.373-379
• /
• 2010

EMAT는 비접촉식 탐촉자인 동시에 모드 선택성이 우수하여 다양한 분야에 적용되고 있으나 근본적으로 에너지 전환효율이 낮아 신호 대 잡음비의 증가에 한계를 보인다. EMAT에 위상배열 기술을 접목하면 초음파의 집속 효과를 얻을 수 있으므로 낮은 전환효율의 문제를 극복하기 위한 하나의 해결방안이 될 수 있을 것으로 판단한다. 본 연구에서는 위상배열 EMAT에 대한 기초연구로 3~4개의 코일로 구성되는 표면파 및 수직횡파 발생용 위상배열 EMAT를 제작하고 각 요소코일에 공급하는 펄스의 지연으로부터 위상배열의 효과를 확인하고 방향특성을 측정하였다. 또한 시험편의 표면에 0.5 mm 깊이의 표면결함과 시험편 내부에 직경 0.5 mm의 측면 드릴 홀을 가공하여 제작된 위상배열 EMAT로 결함 신호를 검출하였으며, 이로부터 제작된 EMAT의 성능을 평가하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권3호
• /
• pp.228-238
• /
• 2005

Purpose: Several cryoprotectants are in use to help the survival of cells during cryopreservation of bone in maxillofacial region. Among them, $Me_2SO$(dimethyl sulfoxide), EG(ethylene glycol), sucrose were used for experimentally created defects with accompanying cryopreserved bone graft in the rabbit model. The aim of this study is to analyze the effect of above mentioned agents on bone formation using histologic and histomorphometrical methods, thus to provide experimental support for clinical application of these agents. Materials and methods: Nine rabbits were used as experimental animals. Surgical defects were created on the distal femoral heads and mesial tibial heads of each animal using trephine drill(5mm diameter and 5mm length). The harvested bones were cryopreserved in $-80^{\circ}C$ refrigerator for one week. The defects were filled with cryopreserved bone with cryoprotectants as experimental groups and cryopreserved bone without cryoprotectant as control. Then, the animals were sacrificed at 1, 2, and 3 weeks after surgery. With Goldner's modified Masson trichrome staining and semiautomatic image analysis system, we observed the change of the cells and bone formation. Results: After bone graft, bone formation and active remodeling process were examined in all experimental groups and the control. But the intensity of such activities of the control were somewhat weaker than that of the experiments. Especially $Me_2SO$+sucrose group was the best in bone formation and bone remodeling. $Me_2SO$ group was more than that of EG group in bone fomation. Sucrose seems to be helpful in survival of the bone cell. Histologic findings showed superior bony quantity and quality in experimental groups than that in control. Conclusions: The data from this study provides the basis for future studies for evaluating the effect of cryoprotectants in the cryopreservation of bone and clinical study for predictable use of these agents.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.309-312
• /
• 2008

본 연구는 강선 부식이 PSC보 휨강도에 미치는 영향을 알아보기 위해 실내실험을 수행하였다. 긴장력을 달리하여 길이 4m인 PSC보부재 5개를 제작하였으며, 그 중 2개의 부재는 덕트 내부에 있는 PS강재를 노출시킨 상태에서 부식촉진장치를 이용해 인위적으로 PS강재를 부식시켰다. 실험부재의 파괴시까지 정적하중을 재하하면서 철근과 콘크리트의 변형률, 중앙부의 처짐량 변화를 측정하였으며 또한 음향센서를 콘크리트 표면에 부착하여 PS강선의 파단횟수 및 파단시기 등을 계측하였다. 실험 결과, PS강재가 부식된 부재는 PS강재의 단면 감소를 고려해 계산한 휨강도 이론값보다 작은 실험값이 나왔다. 또한 휨 파괴 이전에 PS강재가 조기에 파단되는 현상이 관찰되었으며, 결과적으로 휨강도가 급격히 감소됨을 확인할 수 있었다. 부식된 PS강재를 포함하고 있는 PSC보의 휨강도 평가시 일방향 육안관찰에 의한 PS강재의 단면적을 산정하는 것은 매우 어려운 일이며, 연성거동을 위한 유효 PS강재의 단면적을 판단하는 것은 매우 복잡한 일이라 판단된다.

• Journal of Biosystems Engineering
• /
• 제30권5호
• /
• pp.261-267
• /
• 2005

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. As current seeders for direct seeding of rice seeds drill irregular amount of seeds under various operating conditions, conventional drilling should be turned to precision planting which enables accurate placement of proper amount of rice seeds at equal intervals within rows. In this study, design, construction and performance evaluation of a precision seed metering device for planting of rice seeds were carried out. As prototype, the conventional roller type seed metering device was modified for planting: increasing diameter of metering roller, setting 2 or 4 seed cells on metering roller, adding seed discharging lid and its driving cam mechanism. Through performance tests for prototype and the current seed metering device, number of seeds in a hill, planting space and its error ratio, coefficient of variation of planting space (planting accuracy), and seeding length of $90\%$ of seeds in a hill divided by planting space (planting precision) at setting planting spaces of 15, and 20cm, seeding heights of 10, and 20cm, and seeding speeds of 0.1, 0.2, and 0.5m/s were investigated. Prototype showed better seed planting performance than the current seed metering devices. When setting planting space of 15 cm and seeding height of 10cm, prototype with 2 seed cells showed that variations of planting space and seeding lengths of $90\%$ of seeds in a hill at up to seeding speed of 0.5m/s were within 0.9cm, and 3.6cm, respectively.