• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.1
• /
• pp.10-16
• /
• 1997

To confirm the possibility of seaweed extracts for functional food, water or ethyl alcohol solubles were extracted from laver, Porphyra yezoensis and evaluated those food components such as proteins, carbohydrates, nucleic acids, taurine, pigments and browning extent. The amount of proteins, polysaccharides and nucleic acids extracted decreased with increasing ethyl alcohol concentration, which was maximal when water was used as extraction solvent. The extractability of proteins, polysaccharides and nucleic acids was different between the dried and the roasted laver. Taurine was extracted about 1% from the dried and the roasted laver in the range of o~7o% ethyl alcohol concentration. The amount of carotenoids extracted by 95% ethyl alcohol from the dried and the roasted laver were 146.6 and 138.4mg%, respectively, which was 66 ~ 80% of yield extracted by methanol/acetone(1/1) solvent. The browning value of 50 ~6o% ethyl alcohol extraction group from roasted laver was highest among water/ethyl alcohol extraction group. The extraction yield was maximum when laver was extracted with water, and the value was 26.3% for the dried laver and 27.5% for the roasted layer. Organoleptic characteristics from four kinds of extraction groups containing hot water extraction showed that extracts from the roasted laver were evaluated most eminent and thought to be applicable to various preparation of food.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.277-285
• /
• 2010

The objective of this study was to manufacture spent layer chicken meat products by natural freeze-drying. The spent layers of chickens that were slaughtered at 80 wk were obtained from a local slaughter house and separated into two halves of carcasses. The samples were divided into the following groups: 1) control (non-curing), 2) curing, and 3) curing with 2% trehalose before drying. The cured meats were placed at $2^{\circ}C$ for 7 d and then transferred to a natural drying spot located in Injae City, Gangwondo, Korea. The experiment was conducted from January to March in 2008. The average temperature, RH, and wind speed were $-1.5^{\circ}C$, 63%, and 1.8 m/sec, respectively. The cured treatments showed higher pH, lower Aw and lower shear force value compared with the control. Based on the results of TBARS (2-thiobarbituric acid reactive substances) level and volatile basic nitrogen value, lipid oxidation and protein deterioration were inhibited in curing treatments during drying. Trehalose acted as a humectant because it maintained a lower water activity despite the relatively higher moisture content during drying. The polyunsaturated fatty acids content and sensory attributes were higher in cured treatments than in the control during drying. Most of the bacterial counts in the treated groups were lower by 2 Log CFU/g after 1 mon of drying, and Salmonella spp. and Listeria spp. were not found in any treatment. There was also no microbial safety problem associated with dried meat products. Based on the results of this experiment, dried meat products could be manufactured from precured spent layer chickens by natural freeze-drying during winter.

• Korean Journal of Food Science and Technology
• /
• v.12 no.3
• /
• pp.185-192
• /
• 1980

To study lipid components of Panax ginseng produced in Korea, the lipids of fresh ginsengs were extracted with the mixture of chloroform-methanol (2:1, v/v) and those of dried ginsengs were extracted with diethyl ether respectively. The lipid components extracted were separated and quantitated by column, thin layer and gas-liquid chromatographies. The results were summarized as follows : 1. Fresh ginseng contained 0.62% total lipid of which 45.28% were neutral lipids, 18.12% glycolipids, and 36.60% phospholipids. But dried ginseng contained 0.89% total lipids of which 86.48% were neutral lipids, 9.20% glycolipids, and 4.32% phospholipids. 2. Triglycerides (37.6 to 42.5% of the total neutral lipids) and sterol esters (16.5 to 19.6%) in all the fresh and dried ginseng were the major components among the neutral lipids. Monoglycerides, diglycerides, free fatty acids and free sterols were minor components. 3. Digalactosyl diglycerides (23.5% of the total glycolipids) in the fresh ginseng and steryl liglycosides (28.9%) in the dried ginseng were predominant components among the glycopids, respectively, Esterified steryl glycosides and monogalactosyl diglycerides were also identified, and four unknown spots in the fresh ginseng and two unknown spots in the dried ginseng were present. 4. Phosphatidyl cholines (31.3 to 31.9% of the total phospholipids) and phosphatidyl glycerols (34.8 to 36.7%) in all the fresh and dried ginseng were the major components among the phospholipids. Phosphatidyl inositols and phosphatidyl ethanolamines were also identified. 5. The major fatty acids in the fresh and dried ginseng were linoleic $(62.29{\sim}64.32%)$, palmitic $(13.16{\sim}15.63%)$, oleic $(5.73{sim}7.23%)$ and linolenic $(5.73{sim}7.23%)$. The fatty acid compositions in neutral lipid fraction was similar to the pattern in those of the total lipids. But glycolipid and phospholipid fractions contained a lower percent of linoleic acid and a higher percent of palmitic acid than the neutral lipid fraction.

• Restorative Dentistry and Endodontics
• /
• v.27 no.1
• /
• pp.34-43
• /
• 2002

The purpose of this study was to compare microleakage and marginal hybrid layer in class V restorations using two one-bottle adhesives and one self-etching adhesive. Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were pre-pared on buccal and lingual surfaces of 30 extracted human molar teeth. Prepared teeth were randomly divided into three treatment groups (n=30) and restored with three adhesives and composites: Single Bond/Filtek Z-250 (Group 1), Prime&BondNT/Esthet.X (Group 2), UniFil Bond/UniFil F (Group 3). For microleakage, samples were stored in room temperature water for 24 hours, thermocycled stained with 2% methylene blue dye, sectioned into halves, scored and analysed using Mann-whitney test and Wilcoxon signed rank sum test. For marginal hybrid layer, samples were sectioned into halves, treated with 10% phosphoric acid for 5 seconds, stored in 5% NaOCL solution for 24 hours, dried and gold coated. Occlusal and gingival margins of each sample were inspected under SEM. The results of this study were as follows ; 1. Microleakage at the occlusal margins was not evident in group 1 and group 2, but it showed in group 3 (p<0.05). 2. Microleakage in group 1 and group 3 was significantly lower than in group 2 at gingival margins (p<0.05). 3. Microleakage at gingival margins was greater than at occlusal margins in group 1 and group 2, but microleakage at occlusal margins was greater than at gingival margins in group 3 (p<0.05). 4. In group 1 and group 2, no gaps at occlusal margins showed. But gaps showed in group 3. Occlusal margins were free from a hybrid layer in all groups 5. The thickness of the marginal hybrid layers was 2.5~5 $\mu\textrm{m}$ thick in group 5 $\mu\textrm{m}$ thick in group 2 and 1.5 $\mu\textrm{m}$ thick in group 3. 6 There was no corelation between microleakage and thickness of marginal hybrid layer. In coclusion, the effect of dentin adhesives on microleakge in class V composite restorations was excellent when one-bottle adhesives were applied on enamel margin, and it was good when a self-etching adhesive was applied on dentinal margin. There was no corelation between microleakage and thickness of marginal hybrid layer.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.141-146
• /
• 2004

The purpose of this study was to evaluate the efficiency of the preparation of oval canals using hand and engine-driven instruments with SEM observation. Thirty single-rooted teeth with oval canal were used in this study. The teeth were divided into 3 groups. In group A the teeth were instrumented up to a size 35 K-file using RC-prep and irrigated with 5% NaOCl between each file size. In group B. the teeth were instrumented with Profile according to the manufacture's instructions using RC-Prep and irrigated with 5% NaOCl between each file size. In group C. the teeth were instrumented with GT file according to the manufacture's instructions using RC-prep and irrigated with 5% NaOCl between each file size. Then. in all teeth. a final flush of 5ml of distilled water delivered for 30s. Canals were dried with sterile standardized paper points. After preparing the canals, the teeth were sectioned along their mesial and diatal surfaces by using low-speed diamond disc. chisel and mallet. Each root section was then dehydrated in graded concentration of alcohol (70, 80, 90, 100%). mounted on an aluminum stub. sputter-coated with gold-palladium and observed with scanning electron microscope (HITACHI S-4200) in middle and apical area. The results of this study were as follows: 1. In the middle area. group B and group C showed less smear layer than group A and it was statistically significant (p < 0.05). 2. In the middle area. group B showed greater smear layer than group C. but it was not statistically significant (p > 0.05). 3. In the apical area, group C showed less smear layer than group A. and it was statistically significant (p < 0.05). 4. In the apical area. group A showed greater smear layer than group B. but it was not statistically significant (p > 0.05). 5. In the apical area. group B showed greater smear layer than group C. but it was not statistically significant (p > 0.05). 6. In all groups. the middle area was less smear layer than the apical area. and it was statistically significant (p < 0.05).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.3
• /
• pp.411-427
• /
• 1996

The purpose of this study was to observe the healing process and the distribution of fibronectin in injured condylar cartilage and bone by using LM and SEM. In order to perform this study, 40 male rat, weighing about 250g were selected. Under general anesthesia with Pentobarbital sodium, condylar cartilage and neck bone were resected. Then, the wound was irrigated with saline and closed with 5-0 chromic catgut and 4-0 silk by layer-to-layer suturing. The experimental rats were sacrificed by perfusion with 3% paraformaldehyde at 1st and 4th week after operation. The condylar process and surrounding tissues were cut, demineralized, dehydrated and embedded in paraffin. The histological observation of the specimens in LM level was performed after H-E stain and Azan stain. For localization of fibronectin, immunostaining was achieved by the avidin-biotin complex method. To study the change on condylar surface, the specimens were dehydrated, dried, gold coated and were observed with a scanning electron microscope(Hitachi S-2300). The results were as follows ; 1. The cartilage group and the bone group were repaired with epiphyseal cartilage layer on the cut surface as the normal control group. 2. The cut surface was repaired more quickly in the cartilage group than in the bone group. 3. Chondrocytes, diferentiated during healing, were stained strongly to anti-fibronectin, and fibronectin was supposed to participatein chondrocyte differentiation and cartilagenous matrix formation. 4. Fibronectin was distributed more in the new bone than in the old bone, and the osteoblasts surrounding it were also stained strongly. Fibronectin was supposed to participate in new bone matrix formation. 5. Fibronectin is supposed to be associated with the differentiation, migration and adhesion of chondrocyte and osteoblast and to participate in endochondral bone formation.

• Journal of Life Science
• /
• v.16 no.6
• /
• pp.989-993
• /
• 2006

The antimicrobial substance from Pyrola japonica were extracted and isolated. Eighty percent ethanol extract of dried Pyrola japonica was fractionated to hexane, diethyl ether, ethyl acetate and aqueous layer. The hexane-soluble fraction showed the highest inhibitory activity against Bacillus subtilis. Moreover the hexane layer was fractionated into 5 groups by silica gel column chromatography. From the results, group No. 2 ($18{\sim}40$ fractions) showed the highest antimicrobial activity. The group was re-separated to 10 fractions by preparative thin layer chromatography and the peak I as active fraction was isolated by HPLC.

• Geomechanics and Engineering
• /
• v.32 no.3
• /
• pp.245-254
• /
• 2023

Through qualitative analysis and quantitative analysis, the contradictory conclusions about the stability of the settled goaf with two-layer coal seams subject to building load were obtained. Therefore, it is necessary to combine the additional stress method and numerical simulation to further analyze the foundation stability. Through borehole analysis and empirical formula analogy, the height of water-conducting fracture zone in No.4 coal and No.9 coal were obtained, providing the calculation range of water-conducting fracture zone for numerical simulation. To ensure the accuracy of the elastic modulus of broken gangue, the stress-strain curve were obtained by broken gangue compression test in dried state of No.4 coal seam and in soaking state of No.9 coal seam. To ensure the rationality of the numerical simulation results, the actual measured subsidence data were retrieved by numerical simulation. FISH language was used to analyze the maximum building load on the surface and determine the influence depth of building load on the foundation. The critical building load was 0.16 MPa of No.4 settled goaf and was 1.6 MPa of No.9 settled goaf. The additional stress affected the water-conducting fracture zone obviously, resulted in the subsidence of water-conducting fracture zone was greater than that of bending subsidence zone. In this paper, the additional stress method was analyzed by numerical simulation method, which can provide a new analysis method for the treatment and utilization of the settled goaf.

• Preventive Nutrition and Food Science
• /
• v.1 no.2
• /
• pp.203-207
• /
• 1996

Methanol extract of dried persimmon leaves was refractionated using hexane, chloroform, ethylacetate, n-butanol aqueous fractions. Among these chloroform fraction showed the highest inhibition rate on the mutagenicities of aflatoxin B₁(AFB₁) and 3,2' -dimethyl-4-amino-bipheny1(DMAB) in Salmonella typhimurium TA 100. Chloroform fraction was further fractionated into eight fractions by silica gel column chromatography and thin layer chromatography(TLC). The fraction 5 on TLC exhibited the highest antimutagenic activities in AFB₁and DMAB. 2,4-Decadienal, dihydro-4-methyl-2(3H)-furanone, hexanoic acid 1,4-bis(1-methy1 ethy1)benzene, heptanoic acid, phenol, octanoic acid, nonanoic acid and benzoic acid were tentatively identified from this antimutagenic fraction by GC-MS.

• Journal of Ginseng Research
• /
• v.14 no.3
• /
• pp.437-441
• /
• 1990

The investigation of UV absorbing compounds in saponin fraction of Pnm.1. Kiairnk root was carried out by thin layer chromatography, semipreparative HVLC. l3C, 1H-NMR, mass spectrometry and chemical characteristics in searching plant for growth regulatony substances such as phenolic glycoside. Drying of fresh ginseng at 15 $^{\circ}C$ decreased not only number but also size of UV absorbing sports on TLC. One of the relatively large spots in fresh ginseng was isolated and identified as adenosine, which is subjected for growth stimulatory activity Detection of phenolic glycosides failed in dried root bolt was highly probable in fresh ginseng even with the insufficient amount of sample.