• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.641-648
• /
• 2000

The horizontal drain method by installing drains horizontally in the ground is often used to expedite the dispersion of pore water and to increase the strength of dredged soft clay under the action of gravity or vacuum. In this study a numerical analysis method is developed to predict the consolidation process of soft ground with horizontal drains. One-dimensional self-weight consolidation theory is extended tn three-dimensions] theory with appropriate boundary conditions of horizontal drains. In the condition of pore water drainage by gravity, the behavior of the dredged clay with horizontal drains is compared with that of the clay without drains. The influence of design factors of drains on consolidation process is also analyzed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.02a
• /
• pp.23-35
• /
• 1999

Although the purpose of dredging in the past was merely as a means of lowering the water level, presently land reclamation from dredged fill is of greater interest. From an economical standpoint, due to the difficulties in acquiring landfill for coastal projects, there is a growing trend toward simply using easily obtainable marine clay for use as fill. But because the ground formed by dredged fill has but low strength and is accompanied by large settlements, it is important that the engineering characteristics be fully investigated. In order to use dredged Masan marine clays as fill material, the engineering characteristics have been studied in this paper.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.217-222
• /
• 2000

An understanding of the behaviour of soft clay soils is important in a large number of civil engineering applications, including dredging operations, land reclamation and slurry management such as disposal and storage. Although the details of the behaviour depend on parameters such as the soil mineralogy, the pore water chemistry, the organic content and the microbiology, there are general features that are typical in many cases. The purpose of this paper is to present and discuss some of evaporation and desiccation observed in laboratory experiments under controlled conditions. Desiccation of dredged material is basically removal of water by evaporation which is controlled by weather and material type, etc. This study shows that (1) solar radiation, (2) wind velocity, (3) material depth, (4) trench depth are important factors in desiccation of dredged ultra soft clay.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.499-506
• /
• 2004

The use of dredged soft marine clay is increasing due to a shortage of coarse material available. This paper presents a stabilization method that can increase shear strength of the surface layer of a dredged clay deposit at dates much earlier than usual. The desiccation of the upper soft 1-2m layer can be accelerated by interrupting water seeping from its bottom with impervious geotextile. Just below the geotextile, enough pervious material is provided so that the underlying deposit can be drained through it. This scheme is proved to be effective through theoretical analysis.

• Geotechnical Engineering
• /
• v.10 no.4
• /
• pp.153-166
• /
• 1994

In this paper, the experimental study on the behavior of the dredged clay was performed by introducing the consolidation teat method using continuous loading. Also a new testing method was examined and the strength of the dredged clay using thin plate was evaluated. The rheological characteristics of the dredged clay are described by the gingham model. The static and rheologic thin plate penetration test is proposed for the shear strength testing method. It is found that both of testing methods are reasonable and have a practicability. Especially, the strength increases for a water content which is less than two times of liquid limit in case of silty soil and clayey soil. About plasticity index, the strength increases rapidly for a value less than 10 for silt, 5 for clay which a water content is normalized by plasticity index of silty soil rather than clayey soil.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1992.10a
• /
• pp.47-54
• /
• 1992

When marine clay is hydraulically dredged from seabed and pumped into the pond enclosed by contatinment dykes, marine clay is mixed and flocculated with water and then settled. At this time, the fines will interact with the water to form a Bingham plastic slurry which has non-Newtonian characteristics. The dredged slurry has different physical properties depending on settling locations and settling depths in the pond and has few hundred percent of water content and almost nil of shear strenght. In order to make this condition of the dredged slurry the final formation for public use within a short period, sand spreading method to enhance the support capacity of the dredged slurry is developed. In this paper, the effect of sand mixing into the dredged slurry of this method is analyzed based on reference study, laboratory tests and actual construction results.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.149-156
• /
• 2000

Sedimentation and self-weight consolidation tests in cylinder and large model tank and field measurement such as settlement and pore water pressure at each layer by wireless automatic instrumentation system were carried out to investigate the behaviour of dredged marine clay fill. The consolidation behaviour for each reclaimed layer was analyzed from these measured data and numerical analysis result using finite strain consolidation theory. It was fond from this study that the consolidation behaviour of dredged clay fill is heavily dependent on the filling process.

• Geomechanics and Engineering
• /
• v.15 no.4
• /
• pp.957-964
• /
• 2018

In this study, a method of electrochemical consolidation is applied. This method utilizes electro-osmosis, which is an effective ground improvement technique for soft clays, and soil treatment using lime, which is the oldest traditional soil stabilizer. The mechanism of lime treatment for soil involves cation exchange, which leads to the flocculation and agglomeration. Five representative laboratory tests-an electro-osmotic test and four electrochemical tests with various proportions of lime-were performed on dredged marine clay. The objectives of this study are to investigate the effect of electrochemical treatment and to determine the optimum dose for optimal consolidation performance of dredged marine clay. The results show that a better consolidation effect was achieved in terms of current, temperature, and vane shear strength by using electrochemical treatment. The best results were observed for the electrochemical test using 4% lime content.

• KCID journal
• /
• v.5 no.2
• /
• pp.20-32
• /
• 1998

In the present study, 2-D consolidation theory of the dredged clay by means of horizontal drain method is proposed. The horizontal drain method to install the drains such as plastic drain board within the dredged clay is a soil improvement method to accel

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.257-264
• /
• 2003

Bulking change between sediments and dredged soils occurs when dredged soils are fully disturbed by dredging process and settled down to stabilized conditions in the basin. Bulking of dredged soils are affected by chemical injection, coagulant and flocculant, to speed up settling process of the suspended solids. In this paper, bulking changes of dredged soils are investigated by experimental works regarding injection effects of the coagulant and flocculant. Dredged sediments were sampled in the lagoon located at the East Coast, and the bulking change of dredged soils is quantitatively analysed by changing the clay content and the amount of the coagulant and flocculant. The optimal amounts of the coagulant and flocculant are determined based on minimal bulking change due to coagulant and flocculant injection. From the experimental results, the bulking of dredged soils increased 1.69 times on the average and the bulking change rate slightly increased as clay content increasea due to injection of the coagulant and flocculant.