• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.223-230
• /
• 1995

This study investigates a combined mathematical model for the quantitative estimation of regional myocardial blood flow in experimental canine coronary artery occlusion and in patients with ischemic myocardial diseases using Rb-82 dynamic myocardial positron emission tomography. The coronary thrombosis was induced using the new catheter technique by narrowing the lumen of coronary vessel gradually, which finally led to partial obstruction of coronary artery. Thirty four Rb-82 dynamic myocardial PET scans were performed sequentially for each experiment using our 5, 10 and 20 second acquisition protocol, respectively, and six to seven regions of interest were drawn on each transaxial slices, one on left ventricular chamber for input function and the others on normal and decreased perfusion myocardial segments for the flow estimation in those regions. Two compartment model and graphical analysis method have been applied to the measured sets of regional PET data, and the rate constants of influx to myocardial tissue were calculated for regional myocardial flow estimates with the two parameter fits of raw data by the Levenberg-Marquardt method. The results showed that, (I) two compartment model suggested by Kety-Schmidt, with proper modification of the measured data and volume of distribution, could be used for the simple estimation of regional myocardial blood flow, (2) the calculated regional myocardial blood flow estimates were dependent on the selection of input function, which reflected partial volume effect and left ventricular wall motion in previously used graphical analysis, and (3) mathematically fitted input and tissue time activity curves were more suitable than the direct application of the measured data in terms of convergence.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.93-100
• /
• 2011

A coupled tide-surge model, which has been evaluated the utility in the previous study, is applied for simulating the inundation phenomena. The coupled model system adopts the hydrodynamic module of MIKE21 software, and the study area is identical to the previous study. The only difference is additional detailed areas for simulating inundation. An artificial scenario of a virtual typhoon striking Mokpo coastal zone at spring high tide is simulated. Then the calculated water level corresponds to the extreme high water level(556 cm) for 100 year return period. The result also shows the inundation depth is 50~100 cm not only near the Mokpo Inner Port but also near the Mokpo North Port. Finally, the coastal inundation prediction map is drawn on the basis of inundation simulation results.

• Journal of Environmental Health Sciences
• /
• v.42 no.3
• /
• pp.160-168
• /
• 2016

Objectives: Materials coming into contact with food may result in the migration of chemical substances into the food. To protect consumers from exposure, Regulation (EU) No. 10/2011 specifies the use of standard migration tests. Polyethylene terephthalate (PET), widely used for food packaging materials, has drawn the attention of researchers because unwanted migration of PET into food might occur when consumers reuse packaging material. The aim of this study was to predict and develop a migration model for two components, acetaldehyde and butyraldehyde in PET, into food simulants under conditions of changing pH and solvents, such as those observed in fermented foods like kimchi or sauerkraut. Methods: Using a migration model based on Fick's second law of diffusion in one dimension, the migration of acetaldehyde and butyraldehyde from PET into a simulant of fermented food at $20^{\circ}C$ over 10 days was evaluated. The simulant for fermented food was modelled as 10% ethanol for three days, followed by 3% acetic acid for seven days. Results: The migration of acetaldehyde into the 10% ethanol was 0.36 times that of a simulated fermented food system, while that of butyraldehyde was 1.34 times greater. These results may have been influenced by the chemical interactions among the migrants, polymers and simulants, as well as by the solubilities of the migrants in polymers and simulants. Conclusion: Because food simulants have a limited capacity to mimic real food systems under the current migration model, an appropriate simulant and migration test should be considered in the case of increasing acidity. Furthermore, since the accuracy of the worst-case estimation of migration predicted by the current model is severely limited under changing food conditions, food simulants and their interactions should be further investigated with respect to conservative migration modelling.

• Journal of the Korean Institute of Gas
• /
• v.5 no.2 s.14
• /
• pp.43-51
• /
• 2001

ln this study, a natural gas pipeline network model was established using STONER. First a map of natural gas pipeline network was drawn on STONER and then the length and diameter of the pipe were inputted. And as the specific gravity of gas flowing in the pipeline which is the value of natural gas was inputted. Finally in order to decide the pipeline variables and gas temperature, through the verification with observed real data, the possible error was minimized. For the verification, the pipeline variables and gas temperature were assumed and the pipeline network analysis was accomplished with real demand data. The square deviation of analysed pressure from observed pressure was calculated and the minimum case was selected for the optimum pipeline variables and gas temperature. Thus a proper natural gas pipeline network model for real network was established.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.81-89
• /
• 1997

The size and shape of the human body has been an important factor not only in anthropology but in integration of designs aimed for daily use. Although the three-dimensional measurements have been proposed and obtained introducing new methods, there still remains many problems concerning how to analyze and evaluate the results. In this study, we have got the internal and external orientation factors, image coordinates from the ac-quired photographs, have calaulated the object coordinates through Bundle Adjustment, have matched multi-images. have drawn the object in the computer, and smoothly handled the surface of the body model using the Au-to-CAD system or graphic processing utility then we could generate the digital model of human body. The. results show that once digital modeling of the body is generated. the information which a designer needs can be acquired and the adequate calculations for many application fields can be done easily and many geometrical properties could be extracted. Therefore we propose the possibility of indirect human body measurement through digital model generation.

• Journal of Family Resource Management and Policy Review
• /
• v.14 no.3
• /
• pp.69-85
• /
• 2010

The purpose of this study is to investigate the home-health-care workers licensing education course in Seoul, Korea. Based on the previous research, a conceptual model was suggested explaining the dynamics of perceived educational service quality (SERVQUAL), educational satisfaction and the occupational readiness. The data set for this study drawn from the 297 self-administered surveys were analyzed with the suggested conceptual model by utilizing AMOS program. The measurement models and conceptual model fit well with the collected data set. As results of this study, 5 domains of SERVQUAL were produced including accountability, trustiness, responsiveness, sympathy, and assurance. The results of structural modeling with latent variables confirmed that SERVQUAL were influenced perceived educational satisfaction as well as occupational readiness. Among the SERVQUAL domains, accountability, trustiness, responsiveness, and assurance had significant impacts on the educational satisfaction while accountability, trustiness and responsiveness had significant direct effects on the occupational readiness. The trustiness had significant indirect effects on the occupational readiness via the educational satisfaction. Hence, the educational satisfaction had the significant impacts on the occupational readiness. Based on the findings of this study, we suggest to intense the educational program or curricular focusing on the SERVQUAL elements. Those changes will enhance self-confidence among the prospective home-health-care workers as well as public trustiness on the national long-term care program.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.81-86
• /
• 2005

In this study, we introduce a new category of fuzzy inference systems based on information granulation to carry out the model identification of complex and nonlinear systems. Informally speaking, information granules are viewed as linked collections of objects (data, in particular) drawn together by the criteria of proximity, similarity, or functionality Granulation of information with the aid of Hard C-Means (HCM) clustering help determine the initial parameters of fuzzy model such as the initial apexes of the membership functions and the initial values of polynomial functions being used in the premise and consequence part of the fuzzy rules. And the initial parameters are tuned effectively with the aid of the genetic algorithms(GAs) and the least square method (LSM). An aggregate objective function with a weighting factor is also used in order to achieve a balance between performance of the fuzzy model. The proposed model is evaluated with using a numerical example and is contrasted with the performance of conventional fuzzy models in the literature.

• 전자공학회논문지 IE
• /
• v.45 no.2
• /
• pp.34-39
• /
• 2008

This study established the efficient system that retrieves the 3D model by using a statistical technique called the function of discriminant analysis. This method was suggested to search index, which was formed by the statistics of 128 feature vectors including those scope, minimum value, average, standard deviation, skewness and scale. All of these were sampled with Osada's D2 method and the statistics as a factor effecting a change turned the value of discriminant analytic function into that of index. Through the primary retrieval on the model of query, the class above the top 2% was drawn out by comparing the query with the index of previously saved class from the group of same models. This method was proved an efficient retrieval technique that saved its procedural time. It shortened the retrieval time for 3D model by 57% faster than the existing Osada's method, and the precision that similar models were found in the first place was recorded 0.362, which revealed it more efficient by 44.8%.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.7
• /
• pp.486-494
• /
• 2009

One-dimensional modeling of $CH_4$/air premixed flame was conducted to validate the heat loss model and investigate NOx formation characteristics in the postflame region. The predicted temperature and NO concentration were compared to experimental data and previous heat loss model results using a constant gradient of temperature (100 K/cm). The following conclusions were drawn. In the heat loss model using steady-state heat transfer equation, the numerical results using the effective heat loss coefficient ($h_{eff}$) of $1.0\;W/m^2K$ were in very good agreement with the experiments in terms of temperature and NO concentration. On the other hand, the calculated values using the constant gradient of temperature (100 K/cm) were lower than that in the experiments. Although the effects of heat loss suppress NO production near the flame region, a significant difference in NO concentration was not found compared to that under adiabatic conditions. In the postflame region, however, there were considerable differences in NO emission index as well as the contribution of NO formation mechanisms. In particular, in the range of ${\phi}\;{\geq}\;0.8$, the prompt NO mechanism plays an important role in the NO reduction under the adiabatic condition. On the other hand, the mechanism contributes to the NO production under the heat loss conditions.

• The Journal of Korean Association of Computer Education
• /
• v.13 no.2
• /
• pp.25-34
• /
• 2010

The Internet has brought us a new paradigm called WEB 2.0 which inherently represents the openness, participation, sharing, and cooperation. The WEB 2.0 has rendered people to actively participate in the creation of information and to dynamically interact with others to build mutual knowledge-bases, introducing a whole new web environment. One of the most representative techniques demonstrating the value of the WEB 2.0 is the WIKI which is essentially based on the 'Collective Intelligence' and the 'Wisdom of Crowds'. So far, the WIKI has drawn lots of attention for its potential as an educational tool. In this research, we explored the educational potential of the WIKI by investigating various programs and web-based tools offering WIKI services, and then, analyzing the usage model and characteristics of its users. Based on the analysis, we developed a WIKI-based instructional model and also proposed concrete lesson plans adopting this model. Besides, we introduced preliminary methodologies on the active use of the WIKI in the Edunet and the Cyber Home Learning System as well.