• Transactions of Materials Processing
• /
• v.11 no.8
• /
• pp.682-690
• /
• 2002

The formation of adiabatic shearband in tungsten heavy alloys(WHA) was studied in this investigation. Five prismatic specimens were loaded by high velocity impacts and treated as plane strain problems. To find out the effect of particle's volume ratio, specimens containing 81%, 93% and 97% volume percents of tungsten particles were used. Also the effects of particle's geometry and size on the formation of shearband were studied for 81% volume percent alloys by small size particle model, large size particle model and undulated particle models, and the results were discussed.be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, or incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.

• Design & Manufacturing
• /
• v.2 no.3
• /
• pp.32-39
• /
• 2008

after using dom die, this sheet pressed from a variation condition of size, of die holder power,of rpm speed, accordingly the kind of material, the conditionof deformation movement between both sheets is analyzed, is investigated in the Press machine. even if the change quantity which formed raises a blank holder pressure, the change quantity which is special is not visible from the segment where there is not a bead, the segment where there is a bead to the other side does change quantity schedule to initially and the features of press holding power which the change quantity diminishes is showed consequently from pressurization change quantity it is visible but until a rupture territory from the rpm, it goes but the features where the change quantity does not change a lot is observationd, from the CR2-sheet the quality comes out though well but a possibility of getting a result under same conditions of AL-sheet does not become the formation which stands is. It is like that though press-die which uses the drawing-sheet it exchanges the sheets, when AL-sheet with doing, the conclusion for maintain which have a formation sincerity healthy characteristic is same with afterwords.

• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.22-29
• /
• 2011

In this study, the glass fiber drawing from a silica preform in the furnace for the optical fiber manufacturing process is numerically simulated by considering the radiative heating of cylindrically shaped preform. The one-dimensional governing equations of the mass, momentum, and energy conservation for the heated and softened preform are solved as a set of the boundary value problems along with the radiative transfer approximation between the muffle tube and the deformed preform shape, while the furnace heating is modeled by prescribing the temperature distribution of muffle tube. The temperature-dependent viscosity of silica plays an important role in formation of preform neck-down profile when the glass fiber is drawn at high speed. The calculated neck-down profile of preform and the draw tension are found to be reasonable and comparable to the actual results observed in the optical fiber industry. This paper also presents the effects of key operating parameters such as the muffle tube temperature distribution and the fiber drawing speed on the preform neck-down profile and the draw tension. Draw tension varies drastically even with the small change of furnace heating conditions such as maximum heating temperature and heating width, and the fine adjustment of furnace heating is required in order to maintain the appropriate draw tension of 100~200 g.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.131-134
• /
• 2001

합성섬유의 방사공정 중 하나인 연신 공정은 섬유의 성질을 향상시키기 위해 고화된 상태의 섬유를 신장하는 공정이다. 연신할 때 변형이 국부적으로 일어나는 네킹이 일반적으로 관찰되는데, 이 현상은 방사 공정 후에 일어나는, 합성섬유의 역학적 성질과 미세구조에 큰 영향을 미친다[1]. 본 논문에서는 네킹을 분자 구조의 변화에 대한고려 없이 거시적인 관점에서 해석하였다. (중략)

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.47-54
• /
• 2010

Until recently, GIS technology was mainly based on 2D for disaster management. Necessity of 3D spatial information came to the fore with a speedy and accurate response system in disaster management. However, most fire-fighting facilities presently use CAD with 2D formation, Image drawings, and conception of construction data's formation. It is not about the drawings in map production. It's about varieties of construction ways or contents. In this study, we are proposing the ways on analyzing the existing disaster management targets for 2D technology drawings, designing the 3D spatial information data model, and transforming the effective 3D spatial information into algorithm and dimension spatial information construction for easily building on mass 2D architectural drawings to 3D spatial information effectively in disaster management. We can maxim ize efficient construction time and expenses. Then what is proposed in this study about constructing 3D spatial information for manual work, and it's significance for improving decisive decisions and utilizing the tasks to prevent, prepare, respond and restore steps in disaster management.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.231-238
• /
• 2016

We investigated the evolution of crystal formation as a function of drawing ratio in poly(1,4-diaminobutane-co-adipic acid-co-${\varepsilon}$-caprolactam-co-diethylenetriamine)(nylon 466T) copolymer formed by four monomers, i.e 1,4-diaminobutane, adipic acid, ${\varepsilon}$-caprolactam, diethylenetriamine(DETA), using synchrotron X-ray scattering measurement. In case of pristine(as spun) nylon 466T fiber, it was consisted with unoriented nylon $6{\alpha}$ and unoriented nylon $46{\alpha}$ phases. As increase the drawing ratio, unoriented nylon $6{\alpha}$ was transformed to oriented ${\gamma}$ phase, while unoriented nylon $46{\alpha}$ changed to oriented $46{\alpha}$ phase. The effect of the addition of DETA was not observed in the pristine fibers. However, DETA affected to restrict the formation of crystals at the maximum drawing condition, and as a result it had a role to increase the moisture regain.

• Research in Mathematical Education
• /
• v.22 no.4
• /
• pp.261-282
• /
• 2019

The research related to testing pupils' achievement in the field of Measurement and Measure in initial teaching of geometry points to an insufficient adoption of the basic components of the length measurement concept among pupils. In order to discover the cause, we looked at the basic components on which the procedure of measuring length using a ruler is based, highlighted the possibilities of introducing the procedure in measuring length, and determined pupils' achievement during the procedure of measuring length using a ruler. The research sample consisted of 145 pupils, out of which 72 were the 2^nd grade pupils and 73 were the 4^th grade pupils. A descriptive method was applied in the research. The technique we used was testing, and for the statistical data processing we used a χ² test. The results of the research show that, when drawing a straight line of a given length using a ruler, there is no statistical difference in achievement between the 2^nd and 4^th grade pupils, nor in the pupils' knowledge regarding drawing a ruler independently, while drawing a straight line of a given length using a "broken" ruler 4^th grade pupils are statistically better. The results of the research indicate that pupils' achievement is better in doing standard tasks than in non-standard ones, given that the latter require conceptual knowledge. The components of the concept of length measurement using ruler have not been sufficiently developed yet, and these include: zero-point, partitioning a measured object in a series of consecutive measurement units and their iteration. We shed more light on the critical stage in the procedure of length measurement - the transition from non-standard to standard units and the formation of the length measurement scale. For further research, we propose to look at the formation of the concept of length measurement using the ruler through all its components and their inclusion in the mathematics curriculum, as well as examining the correlation of pupils' achievement in the procedure of measuring length with their achievement in measuring area (and volume).

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.275-280
• /
• 2007

The modern society of the 21century is becoming a discussion as spaces appearing as ambiguous boundaries caused by complexed cultural phenomenon. As for the spacial factors we recognize, which appears as phenomenon in which is emphasizing the existing system of cognizance and thinking through drawing inviable parts of the effort within escaping the limits of gravity. This Merleau-Ponty and Gilles Deleuze refines it as theories called "Perception" and "Sense", and through the 'visible and invisible' of Merleau-Ponty and the 'Nonsense and paradox' of Gilles Deleuze, this study object is forming these inviable representations into space. Using the similarities of these two theories as a tool, we will analyze the examples of space with drawing the force that forms invisibility into embodiment, building a possibility of improvement in future spaces.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.460-471
• /
• 2004

The purpose of this study is to investigate the effect of hair-style (straight and wave), hair-length(short, medium, and long), and type of hat design (no-hat, beret, cloche, bowler, and capeline) on impression formation. The experimental materials developed for this study were a set of stimulus and response scales. The 7-point semantic differential response scales were designed. Thirty stimuli color pictures of various combination of hair length, hair style, and type of hat design were manipulated by computer drawing. The subjects were 360 undergraduates living in Seoul, Kyunggi and Kyungnam. The experimental design was composed of 3 factorial designs. The result of the study can be summarized as follows; Impression factor of the stimulus consisted of the 5 different dimensions (attractiveness, gracefulness, activity, concentration of attention, cuteness). Hair style greatly affected gracefulness. On the other hand, hair length made remarkable effects on attractiveness, concentration of attention, and cuteness. In addition, it has been found that the type of hat design significantly influenced on all the factors except attractiveness as independent variables. In regarding the effect of interaction between each variable, the combination of hair style and hair length had significant effects on gracefulness. In the impression formation of cuteness, the combination of hair length and type of hat design were more significant.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.363-366
• /
• 2002

Poly(trimethylene terephthalate)(이하 PTT)는 1941년 Caligo Printing Ink 사의 Whinfield와 Dickson에 의해 PET와 함께 처음으로 중합방법이 보고[1]되었으나, 원료인 1,3-propanediol의 제조가격이 너무 높아 지난 60년간 상업화 및 학문적 연구가 거의 이루어지지 않았다. 최근 미국의 Shell사와 독일의 Degussa(현재 미국의 duPont)에 의해 1,3-propanediol이 대량생산되면서 PTT섬유의 상업적 생산에 점점 관심이 집중되고 있다. (중략)