• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1240-1243
• /
• 2005

The wrinkling in the flange and wall of a part is a predominant failure mode in stamping of sheet metal parts. In many cases this wrinkling may be eliminated by appropriate control of the blank holding force(BHF), but BHF affects the draw depth. Gotoh had studied the wrinkles under $20{\mu}$ in height. In general, the height of wrinkles could be limited under $200{\mu}$ practically. Therefore small BHF can be allowed so that the depth of drawing could be increased. This paper represents the variation of the wrinkles of flange in the part of cup drawing by using aluminium alloy A1050 and A5052. This simulation is used by the explicit finite elements code $PAM-STAMP^{TM}$. The computed results are compared with the experimental results to show the validity of the analysis.

• Journal of Computational Design and Engineering
• /
• 제3권1호
• /
• pp.63-70
• /
• 2016

Deep drawing is a forming process in which a blank of sheet metal is radially drawn into a forming die by the mechanical action of a punch and converted to required shape. Deep drawing involves complex material flow conditions and force distributions. Radial drawing stresses and tangential compressive stresses are induced in flange region due to the material retention property. These compressive stresses result in wrinkling phenomenon in flange region. Normally blank holder is applied for restricting wrinkles. Tensile stresses in radial direction initiate thinning in the wall region of cup. The thinning results into cracking or fracture. The finite element method is widely applied worldwide to simulate the deep drawing process. For real-life simulations of deep drawing process an accurate numerical model, as well as an accurate description of material behavior and contact conditions, is necessary. The finite element method is a powerful tool to predict material thinning deformations before prototypes are made. The proposed innovative methodology combines two techniques for prediction and optimization of thinning in automotive sealing cover. Taguchi design of experiments and analysis of variance has been applied to analyze the influencing process parameters on Thinning. Mathematical relations have been developed to correlate input process parameters and Thinning. Optimization problem has been formulated for thinning and Genetic Algorithm has been applied for optimization. Experimental validation of results proves the applicability of newly proposed approach. The optimized component when manufactured is observed to be safe, no thinning or fracture is observed.

• 한국CDE학회논문집
• /
• 제11권6호
• /
• pp.412-421
• /
• 2006

Recently, the needs for sharing and exchanging drawing information between 2D and 3D data in complex facilities are well recognized throughout the construction industries. The purpose of this study is to propose an information framework to represent 3D IFC (Industry Foundation Classes) -based drawing of building services in complex facilities as 2D drawing. In this study, 1) attributes of building service objects which are used in 3D CAD system are analyzed and present drawing standards are analyzed, 2) based on the analysis, an information framework is developed to represent 3D model in 2D representation, and 3) further more, to test a compatibility of the information sharing framework, number of standardized APIs and an IFC2Dbrowser are developed during the study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.334-337
• /
• 2005

The objective of this research works is to propose a rapid development methodology of small size deep drawing tools for electronic parts utilizing the technology combination of CAE and RP/RT. The technology is applied to the development of deep drawing tools with a drain shape. The final surface of tools is obtained from the evaluation of the formability using the CAE. In order to manufacture the physical prototype of tools fer try-out terming, several fabrication experiments are carried out for three types of rapid tool manufacturing technology. Through the fabrication experiments, the acceptable rapid manufacturing technologies of deep drawing tools with a small size have been proposed.

• 통합자연과학논문집
• /
• 제9권1호
• /
• pp.67-71
• /
• 2016

The university president direct election system in Korea had begun in 1987 as a movement of college democratization in the 1980s after 6.29 Declaration. Since then, many national/private universities had adopted the election system. However, it has posed many problems and it caused a sharp division of opinions between those who approve and disapprove the direct election system. Since 2005, the government has made official of the reformation and/or abolition of the university president direct election system, and has kept pushing for universities to give up the direct election system. Now, only 3 or 4 universities hold on to the system, and many universities have changed into the indirect election system. In the indirect election, a key is the composition of president nomination committee, which confirms the university members's variety. Many universities adopting the indirect election system have used simple random sampling, like drawing lots, to compose the president nomination committee. However, drawing lots has a problem that it has large possibility of composing a biased committee. This research suggests systematic sampling as an alternative to drawing lots. A numerical analysis was conducted using a data of a university in which the indirect election was implemented recently. The drawing lots gave the biased nomination committee. On the other hand, the systematic sample improves the problem and confirms more the variety of all members.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.5243-5250
• /
• 2013

최근 국내 건축시장에서는 건설프로젝트 생애주기 전반에 걸쳐 생산되는 정보를 3D 모델 기반으로 관리하는 BIM에 대한 관심이 높아지고 있다. 국가적으로도 그에 따른 정책, 기술개발의 진행과 함께, BIM을 이용한 설계기준이 제도화 되고 있다. 그러나 BIM 소프트웨어(Revit Architecture)를 이용한 2D 설계도면 작성과 관련해서는 기존의 CAD와 같은 수준의 실시설계도면 작성이 어려운 것으로 인식되고 있다. 기존 연구에 따르면, BIM 소프트웨어가 가지고 있는 문제점으로는 시공수준의 접합상세가 나오지 않는다는 문제점과 효과적으로 상세를 더할 수 있는 모델링 기능이 부족하다는 문제점이 지적되고 있다. 이에 본 연구에서는 BIM 소프트웨어를 사용하여 현재 납품되고 있는 2D 실시설계도면 수준의 도면작성과 출력가능 여부를 검증하고자 한다. 이를 위해 설계기본요소를 분석하고, 단면상 세도를 사례로 BIM 소프트웨어에 제공되는 기능을 사용해 기존 CAD로 작성한 실시설계도면과 동일한 수준의 도면작성과 출력이 가능함을 검증하였다.

• 대한공간정보학회지
• /
• 제12권3호
• /
• pp.91-97
• /
• 2004

종래에 아날로그 방식의 사진측량에서는 중복된 영상을 도화기를 통해 표정과정을 거쳐 입체모델을 생성하고 이를 바탕으로 도화과정을 수행함으로써 최종도면을 획득하였다. 그러나 이러한 과정을 소형컴퓨터를 통해 일괄처리 함으로써 처리과정의 자동화를 꾀할 수 있으며 입체 모델은 생성하지 않고 해석적인 방법을 통해 3차원 수치자료를 쉽게 획득 할 수 있다. 따라서 본 연구는 수치영상을 이용하여 3차원 위치측정이 가능한 측량시스템을 구축하여 기준점 측량작업 및 촬영조건을 획기적으로 줄임으로써 보다 효율적으로 수치도면을 제작하는데 도움을 주고자 한다. 그 결과 비교적 저가의 디지털 카메라로 사진측량이 이루어지고 컴퓨터만으로도 수치도면을 작성할 수 있다. 따라서 소규모 지역에서는 일반측량보다 경제적으로 수치 도면을 작성할 수 있으므로 시설물 관리를 위한 도면제작 등에 활용 될 수 있을 것이다.

• 대한물리의학회지
• /
• 제10권4호
• /
• pp.33-38
• /
• 2015

PURPOSE: Although the abdominal drawing-in maneuver is commonly used in clinical training for trunk stability, performing this procedure in stroke patients is difficult; instead, maximal expiration can be much easily performed in stroke patients. In the present study, we first aimed to demonstrate the effects of the abdominal drawing-in maneuver and maximal expiration on trunk stability in stroke patients. Moreover, we compared the thickness of the transverse abdominal, internal oblique, and external oblique muscles on the paretic and non-paretic sides. METHODS: We used ultrasonography to measure the change in the thickness of the transverse abdominal, internal oblique, and external oblique muscles on the paretic and non-paretic sides at rest, while performing the abdominal drawing-in maneuver, and while performing maximal expiration in 23 stroke patients. The ratio of muscle thickness between different conditions was estimated and included in the data analysis (abdominal drawing-in maneuver / at rest and, maximal expiration / at rest). RESULTS: The ratio of the thickness of the transverse abdominal, internal oblique and external oblique muscles during maximal expiration was significantly different on the paretic side (p < 0.05). The ratio of muscle thicknesses on the non-paretic side was greater during maximal expiration than during the abdominal drawing-in maneuver, although this difference was not significant (p > 0.05). CONCLUSION: Our results suggest that maximal expiration more effectively increased the abdominal muscle thickness on the paretic side. Hence, we recommend the application of maximal expiration in clinical trunk stability training on the paretic side of stroke patients.

• The Journal of Korean Physical Therapy
• /
• 제34권5호
• /
• pp.205-211
• /
• 2022

Purpose: This study investigated the effects of an intervention that combined the abdominal drawing-in maneuver and frequency-specific neuromuscular electrical stimulation on changes in trunk muscle activity, muscle fatigue, and balance in stroke patients. Methods: Thirty stroke patients were randomly assigned to two groups. Fifteen subjects were assigned to group I which performed the abdominal drawing-in maneuver combined with low-frequency neuromuscular electrical stimulation and the other 15 subjects to group II where the abdominal drawing-in maneuver was combined with high-frequency neuromuscular electrical stimulation. Muscle activity and fatigue were measured using surface electromyography before the intervention. Balance was measured using the Trunk Impairment Scale and re-measured after six weeks of intervention for comparative analysis. Results: Both groups showed a significant increase in muscle activity and balance (p<0.05), and there was no significant difference between the groups (p>0.05). In the changes in muscle fatigue, only the experimental group II showed a significant increase in muscle fatigue (p<0.05). The difference between the groups was statistically significant (p<0.05). Conclusion: It was confirmed that among stroke patients, the combination of the abdominal drawing-in maneuver and low-frequency neuromuscular electrical stimulation was more effective in changing the muscle activity and balance of the trunk by minimizing the occurrence of muscle fatigue compared to the combination of the abdominal drawing-in maneuver and high-frequency stimulation. These results can be used as basic data for clinical trunk stabilization training.

• 한국BIM학회 논문집
• /
• 제9권3호
• /
• pp.30-40
• /
• 2019

Extraction of fabrication documents is very important because it provides information related to tasks of fabrication and construction. Therefore, in the case of a prefabricated member such as a steel structure, it is necessary to improve the productivity of fabrication documents through 3D BIM. However, research and evidence data on direct comparison analysis of 3D BIM-based documents extraction versus 2D CAD-based documents extraction are hard to find. Thus, this study focuses on productivity analysis of 3D BIM based fabrication documents extraction. In this study, the productivity data of fabrication documents extraction for module construction of EPC project was analyzed. For the productivity analysis, a case study on the fabrication documents of Module A (1,965 sheets) and Module B (1,216 sheets) was conducted. Fabrication documents for each module include general arrangement drawing, assembly drawing, single part drawing and single plate drawing. Comparison of 2D CAD based fabrication documents extraction and 3D BIM based fabrication documents extraction, the productivity for the entire work was improved from 17 hours to 16 hours for Module A and 12 hours to 7 hours for Module B. Especially, the productivity of the assembly drawings, which occupies a large part of the fabrication documents, was improved by about 48.75% from the total time required from 281 hours to 144 hours.