• 토지주택연구
• /
• 제11권3호
• /
• pp.93-101
• /
• 2020

Recently, as a BIM-based construction simulation system, 4D CAD tools using virtual reality (VR) objects are being applied in construction project. In such a system, since the expression of the object is based on VR image, it has a sense of separation from the real environment, thus limiting the use of field engineers. For this reason, there are increasing cases of applying augmented reality (AR) technology to reduce the sense of separation from the field and express realistic VR objects. This study attempts to develop a methodology and BIM module for the pre-construction verification system using AR technology to increase the practical utility of VR-based BIM objects. To this end, authors develop an AR-based drawing verification function and drawing object-based 4D model augmentation function that can increase the practical utility of 2D drawings, and verify the applicability of the system by performing case analysis. Since VR object-based image has a problem of low realism to field engineers, the linking technology between AR object and 4D model is expected to contribute to the expansion of the use of 4D CADsystem in the construction project.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.93-98
• /
• 2005

The purpose of this study is to confirm the improvement of formability of AZ31 magnesium alloy sheet by using local heating and cooling technique. For this, the experiments of warm deep drawing were done under the temperatures of $100^{\circ}C\~400^{\circ}C$, and the punch velocity of 10, 100mm/min. Also FE analysis under the temperatures of blankholder and die of $150^{\circ}C,\;225^{\circ}C\;and\;300^{\circ}C$ for tools(holder and die) was executed with considering heat teansfer. From the results, the formability of AZ31 magnesium alloy, espicially the temperatures of $225^{\circ}C\~250^{\circ}C$ for tools(holder and die)improved remarkably. And the experiments and simulations showed that necking under room temperature for tools occured under the part of punch shoulder while at $300^{\circ}C$ for tools, at the part of die shoulder.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.166-169
• /
• 2008

문화콘텐츠산업에 있어서 만화가 원작콘텐츠로서 활성화되고 각광받기 위해서는 보다 체계적인 만화기획 및 제작 프로세스를 정립해야할 필요성이 있으며, 이론적인 체계와 분석기준을 통해 재미요소를 도출해내는 산업적 마인드를 가져야 할 것이다. 본 논문은 만화제작의 체계적인 프로세스를 정립하고 만화기획에 따른 프로세스별 만화의 구성요소를 도출하여 산업적인 효율성을 높이고자 하는 목적을 가진다. 그 결과 만화제작의 프로세스를 기초설정, 스토리 구성, 스토리텔링, 화면연출, 작화단계로 제시하였으며, 만화기획 단계별로 세부적인 구성요소와 결과물을 도출하였다.

• 대한공간정보학회지
• /
• 제10권1호
• /
• pp.77-82
• /
• 2002

지형공간정보시스템(GSIS)을 지적 전산화작업에 적용하기 위해 지적정보를 수치 전산화하여 토지대장의 On-Line시스템화에 운용할 수 있도록 시도하는데 의의가 있다. 그리고 지적정보의 D/B 구축을 위해 연구대상 지를 일부 선정하여 지적측량 시 D/B 화할 수 없는 지적 불부합지를 일반측량에 의한 현황도와 항공사진측량에 의해 제작된 GSIS 도면을 이용하여 실지 지적기초점을 내려 현황 측량한 성과에 의해 비교 분석하고 그 상관성을 해석함으로써 장래 지적 정보 D/B 구축 시 측량기법의 정확도 향상을 도모하고자 하는데 그 목적이 있다.

• 교육녹색환경연구
• /
• 제18권2호
• /
• pp.1-11
• /
• 2019

본 연구는 지속적으로 증가가 예상되는 폐교시설의 효율적인 활용을 위하여 활용지표의 개발을 통해 폐교 활용 시 객관적인 의사결정을 위한 목적을 가진다. 연구 단계는 크게 폐교 활용 예비지표 도출, 빅데이터를 활용한 최종지표 도출, 지표의 정량화 단계로 구분하여 진행하였으며, 최종적으로 지표를 정량화함으로써 객관화하였다. 향후 지표를 기준으로 시설에 적용 및 검증하고자 한다. 본 연구는 지금까지 폐교시설의 활용을 위한 계획 및 연구에 있어서 시도되지 않았던 빅데이터 분석기법을 적용한 것에 그 의의가 있다.

• STI Policy Review
• /
• 제6권2호
• /
• pp.54-86
• /
• 2015

The study examines the U.S. Small Business Innovation Research (SBIR) program, with a focus on the recent Reauthorization, and compares, in the political context, the U.S. and East Asian countries-Japan, Korea and Taiwan-that adopted the U.S. SBIR program. For the systematic analysis and cross-country comparison, the study employs Kingdon (2003)'s framework-his political theory and Garbage Can Model-to identify political participants and processes underlying the SBIR Reauthorization and to analyze the differences in problem, policy, and politics streams between the U.S. and East Asian countries. For the cross-country comparison, specifically, the study uses various data sources such as OECD, Global Entrepreneurship Monitor, Hofstede's Cultural Dimensions, and World Value Survey. Based on the analysis outcomes, implications of U.S. practices on East Asian countries are extracted as follows. East Asian countries tend to: Have higher entrepreneurial aspiration while lower entrepreneurial activity and attitude than the U.S.; bear higher long term orientation and uncertainty avoidance while lower individualism than the U.S.; and have greater expectations of technology development and higher confidence in political parties while participating less in political action than the U.S. Drawing on the differences, the following policy recommendations are suggested. East Asian countries should: Improve entrepreneurs' access to resources (in particular, financial resource) in order to link their high entrepreneurial aspiration to actual entrepreneurial activities; cultivate failure-tolerating culture and risk-taking entrepreneurs, for instance, by providing a second chance to SBIR-participating businesses that failed to materialize their innovative ideas; and leverage their high expectations of new technology in order to take bold actions regarding their SBIR programs, and update the programs by drawing out constructive dialogues between SBIR stakeholders.

• 복식문화연구
• /
• 제20권3호
• /
• pp.403-415
• /
• 2012

This study did a comparative analysis on the patterns of several male bodice slopers, followed by evaluating the appearance through a virtual garment simulation, which used a three-dimensional virtual garment system. Through this process, this study attempted to comparatively analyze the suitability of the garment or each sloper according to body parts. The analysis of the drawing formulas of bodices slopers had the following results. With a standard chest size, all six slopers had a 1:4 ratio for a front and back chest size; 1:5 or 1:6 for a front and back breast size 1:5 or 1:4 for a neck base circumference; and 1:20 or 1:12 for the chest size. When comparing the anthropometric figures and the actual measurements of each body part for the bodice slopers, the actual measurements secured extra amounts in the drawing process. The evaluation results for appearance of the six men's bodice slopers showed that the slopers used by companies (E and F) had top scores followed by the slopers made for (C and D), while the sloper for education (A) received the lowest scores. Regarding the results of the variance analysis verifying the significant difference between the slopers, twenty-five items had significant differences with the exception of four items on the front side and one item on the backside.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권1호
• /
• pp.260-280
• /
• 2020

Cyber-attacks emerge in a more intelligent way, and various security technologies are applied to respond to such attacks. Still, more and more people agree that individual response to each intelligent infringement attack has a fundamental limit. Accordingly, the cyber threat intelligence analysis technology is drawing attention in analyzing the attacker group, interpreting the attack trend, and obtaining decision making information by collecting a large quantity of cyber-attack information and performing relation analysis. In this study, we proposed relation analysis factors and developed a system for establishing cyber threat intelligence, based on malicious code as a key means of cyber-attacks. As a result of collecting more than 36 million kinds of infringement information and conducting relation analysis, various implications that cannot be obtained by simple searches were derived. We expect actionable intelligence to be established in the true sense of the word if relation analysis logic is developed later.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.320-326
• /
• 2017

다단 딥드로잉 기술은 제품의 생산성 향상과 비용 절감을 위해 휴대폰 배터리 케이스 제품의 생산 공정으로 많이 사용하고 있다. 휴대폰 배터리 케이스는 용량과 강성을 목적으로 세장비가 큰 사각 컵 형상으로 제조된다. 사각 컵 형상의 다단 딥드로잉은 세장비가 크고, 복잡한 변형 형태 메커니즘으로 인한 제품의 좌우 높이 차이가 발생한다. 이로 인해 제품 조립과 표면 품질에 문제가 발생한다. 본 연구에서는 이러한 문제를 개선하기 위해 제품의 높이 차이가 최소가 되는 블랭크 형상에 대해 연구했다. 제품 좌우 높이 차이가 최소가 되는 블랭크 형상을 찾기 위해 최적 설계와 해석을 수행했다. 타원형 블랭크의 장변과 단변을 설계 변수로 설정하고, 목적 함수는 높이 차이가 최소가 되도록, 제품의 두께 감소율이 목표 범위에 도달하도록 설정했다. 또한 최종 제품 형상의 높이를 구속 조건으로 설정하였다. 그 결과 최적 설계를 통한 초기 블랭크 설계로 높이 차이가 최소가 되었으며, 원하는 공정을 지정하여 높이 차이가 최소화 되도록 수행 가능하다. 향후 개발된 자동화 프로세스로 인해 모든 각형 타입의 초기 소재 설계가 가능할 것으로 판단된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.93-96
• /
• 2001

Design sensitivity is calculated in the sheet metal forming process with an elasto-plastic finite element analysis and a direct differentiation method The sensitivity analysis is concerned with the time integration the constitutive relation considering planar anisotropy, shell elements and the contact scheme. The present result is compared with the result obtained with the finite difference approach in deep drawing processes. The obtained sensitivity information is applied to the simple optimization process for the sheet metal forming process.