• 열처리공학회지
• /
• 제18권2호
• /
• pp.105-111
• /
• 2005

In sheet metal forming, drawbeads are often used to control uneven material flow, which may cause defects such as wrinkles, fractures, surface distortion and springback. Appropriate setting and adjusting of the drawbead force is one of the most important parameters in sheet forming process control. Therefore in this study, drawbead test was performed at various bead surface treatment conditions to clarify the frictional characteristics between sheet and drawbead. Furthermore, the differences in drawing force between circular and rectangular shape beads have also been measured to estimate the effectiveness of bead shape on the material flow control. The results show that drawing and friction characteristic were strongly influenced by surface treatments of bead and bead shapes.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2653-2663
• /
• 1994

The design of sheet metal working processes is based on the knowledge about the deformation mechanism and the influence of the process parameters. The typical geometric process parameters are the die geometry, the initial sheet thickness, the initial blank shape, and so on. The initial blank shape is of vital importance in the most sheet metal forming operations, especially in the deep drawing process, since the forming load and the strain distribution are significantly affected by the shape of an initial blank. The influence of the initial blank shape on a square cup deep drawing process is investigated by the numerical simulation and the experiment. The numerical simulation is carried out by a modified membrane finite element method which takes bending deformation into account. The numerical and experi-mental results show that the initial blank shape have strong influence on the forming load and the strain distribution. The numerical results are compared with the experimental results and other numerical results which are calculated with the membrane theory.

• 대한물리의학회지
• /
• 제8권2호
• /
• pp.231-238
• /
• 2013

PURPOSE: The purpose of this study is to find out the thickness variation of the superficial and deep abdominal muscles by measuring the thickness of the abdominal muscles. METHODS: 35 young, healthy adults(24 mens and 11 womens) participated in this study. The first, when only bridge exercise we had measured the thickness of their abdominal muscles by the ultrasound. The second, when the abdominal drawing-in during maintaining the bridge exercise we had measured the thickness of their abdominal muscles by the ultrasound. A pared t-test was used to determine a statistical significance for the thickness variation of the superficial and deep abdominal muscles. RESULTS: Results of before and after comparative analysis. The surperficial muscles(rectus abdominis, external obilique) statistically significantly reduced in the thickness and the deep muscle(transeverse abdominis) statistically significantly increased in the thickness. CONCLUSION: We have shown that the abdominal drawing-in exercise during maintaining the bridge exercise was effective to increase in strengthening abdominal deep muscle selectively.

• 한국컴퓨터그래픽스학회논문지
• /
• 제26권3호
• /
• pp.69-77
• /
• 2020

본 논문은 3차원 가상환경에서 드로잉할 때, 사용자에게 위치 입력에 대한 피드백을 부여하는 효과적인 방법을 설계하고 그 성능을 측정하여, 피드백을 통해 사용자가 올바른 위치를 입력하는데 도움을 줄 수 있는지 확인하고자 한다. 주어진 선 형상을 핸드-헬드 컨트롤러를 이용하여 따라 그리는 실험에서 사용자에게 위치 입력 오차에 대해 세 단계의 시각, 청각, 촉각 피드백을 각각 제공하고, 어떤 피드백이 가장 효과적인지를 분석하였다. 피드백의 형태에 따른 위치 입력 정확도를 분석한 결과, 피드백은 특정 크기 이상의 입력 오류를 크게 감소시킬 수 있었으며, 시각과 촉각 피드백이 청각 피드백보다 효과적이었다.

• 대한기계학회논문집A
• /
• 제20권12호
• /
• pp.3728-3740
• /
• 1996

High-quality cups of deep drawing ratio of more than four cannot be simply drawn by conventional drawing and redrawing processes. In the present study, after the first deep drawing process, subsequent hydromechanical reverse redrawing with controlled radial pressure is employed. In order to increase the deep drawing ratio up to muchmore than four, the radial pressure should be controlled independently of the chamber pressure and thus an optimum forming condition can be found easily by varying the radial pressure. The process has been subjected to finite element analysis by using the rigid-platic material modeling considering all the frictional conditions induced by the hydrostatic pressure. In order to consider the pressure effect on the sheet, the pressure distributions on the flange part and the side wall part are calculated mumerically from simplified Navier-stokes equation. The comparison of the computation with the experiment has shown that the finite element modeling can be conveniently emplyed for the design of the process with reliability from the viewpoint of formability.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.557-561
• /
• 1997

In this study, using DEFORM and PAM-STAMP drawbead analysis is carried out for the commercial code availability. The three drawbead types, single circular drawbead, single square drawbead and double circular drawbead, are examined. The clamping force, drawing force and effective strain of sheet metal which is passed by drawbead are checked on each drawbeads.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.26-29
• /
• 2000

drawbead expert models are developed for calculating drawbead restraining force and drawbead-exit thinnings which are boundary conditions in FEM stamping simulation employing the linear multiple regression method by which the deviation of drawing characteristics between drawing test and mathematical model is minimized. In order to show the efficiency and accuracy of an expert drawbead model a finite element simulation of auto-body panel stamping is carried out. The finite element simulation shows that the expert drawbead model provides the accurate solution guarantees the stable convergence and the merit in the computation time.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.279-280
• /
• 2007

In this study, it is investigated that the effect of material properties such as various temperature, forming speed and strain rates on formability and forming limits of Mg alloy sheet in square cup deep drawing. Since the sheet metal forming of Mg alloy is perform at elevated temperature, the effect of strain rates related with the forming temperature and forming speed is very important factor for formability and forming limits. Therefore, the investigation for process variables is necessary to improve formability and forming limits. Also, the effects of strain rate and thickness transformation were studied by the experimental and FE analysis using the square cup deep drawing. The temperature, forming speed, and strain rates were investigated. Forming of Mg alloy takes consider into temperature, proper forming speed and strain-rate the formed parts were good without defects fur forming limits.

• 한국IT서비스학회지
• /
• 제10권2호
• /
• pp.309-327
• /
• 2011

Even though several methodologies for SOA(Service Oriented Architecture) have been proposed, in practical aspects most of them have some problems since they fail to propose specific policies in definition and identification of a service. This paper proposes a service modeling methodology. SOMO(Service Oriented Modeling using Ontology), which draws proper services in the process of defining and identifying services. SOMO defines a service ontology based on service definition and characteristics in SOA. The service drawing process consists of 3 steps : requirement analysis, service identification, and service definition. SOMO is expected to increase the degree of reuse and facilitates the definition and search of services by using service ontology. In addition, it clearly allows the definition and identification of services, satisfying the user requirements.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1844-1853
• /
• 1995

Theoretical and experimental drawing characteristics for the single circular and square drawbeads are discussed. During the blank holding process, the strain distributions of upper and lower skins of specimens, and the die reactional forces are analysed by F. E. M., and they are compared with the experimental results. The drawbead restraining forces and strain distributions for the drawn specimens by the various drawing length are also analysed and compared with the experimental results. It is concluded that the theoretical simulations and results could be very useful for the prediction of real cases.