• 대한물리의학회지
• /
• 제8권4호
• /
• pp.513-523
• /
• 2013

PURPOSE: The purpose of this study was to investigate characteristics of the forced pulmonary function test effect and abdominal muscles activation by combined complex exercise with abdominal drawing-in maneuver training of chronic stroke patients. METHODS: 14 post stroke patients(10 males and 4 females) involved voluntary this study and we divided two groups into CEG(complex exercise group) and CEAG (complex exercise and abdominal drawing-in maneuver group).(n=7, per goup). Each groups implicated the 2 times, 30minute exercises for 6 weeks a day. The CEAG performed the complex exercise 15 minutes and 15 minutes of abdominal drawing-in maneuver. For data analysis, the mean and standard deviation were estimated; non-parametric independent t-test was carried out. RESULTS: According to the study, in the combined complex exercise with abdominal drawing-in maneuver group, FVC and activation of transversus abdominis/internal oblique were statistically significant difference compared to the complex exercise group. CONCLUSION: These results indicate that the combined complex with abdominal drawing-in maneuver was efficient in enhancing abdominal muscles activation and pulmonary function of chronic stroke patients.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.45-52
• /
• 1998

This study is to investigate the effects of warm deep drawing with aluminum sheets of A1050-H16 and A5052-H32 for improving deep drawability. Experiments for procucing circular cups and square cups were carried out for various working conditions, such as forming temperature and blank shape. The limit drawing ratio(LDR) of 2.63 in warm deep drawing of circular cups in case of A5052-H32 sheet, whereas LDR of A1050-H16 is 2.25, could be obtained and the former was 8 times higher than the value at room temperature. The maximum relative drawing depth for square cups of A5052-H32 material was also about 2 times deeper than the depth drawn at room temperature. The effects of blank shape, and temperature on drawability of aluminum materials as well as thickness distribution of drawn cups were examined and discussed.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.259-261
• /
• 2015

안전한 항행정보 서비스를 제공하기 위해서는 전자해도, AIS정보, 항로표지정보, 해사안전정보, 날씨정보, 조류정보 등과 같은 다양한 데이터가 융합된 S-100 표준 기반의 e-Navigation 시스템이 구축되어야 한다. S-101 전자해도는 e-Navigation 시스템을 구축하기위해 선행되어야할 작업이며 S-101 전자해도를 구현하기 위해서는 S-100 General Portrayal Model의 Portrayal Engine에서 생성한 Drawing Instruction 집합을 분석하여 Rendering Engine을 구현해야 한다. 본 논문에서는 기존 S-57 전자해도와 S-101 전자해도의 Drawing Instruction을 분석하여 S-101 전자해도 구현을 위한 기반을 다진다.

• 대한기계학회논문집A
• /
• 제33권3호
• /
• pp.276-282
• /
• 2009

Wrinkling in the flange and wall of a deep-drawn part is one of the major defects in sheet metal processes. Wrinkling is influenced by many factors, such as material properties, shape of the body, forming conditions, stress state and thickness, etc. It is difficult to analyze the wrinkling initiation and growth according to the factors because the effects of the factors are very complex and the wrinkling behavior may show wide variation even though small deviation of factors. In this study, the influence of wrinkling parameters, such as material properties (Al1050, Al5052), the blank holding force and the drawing depth on the wrinkling initiation and growth is investigated by using the experimental method and the dynamic explicit finite element analysis. From the results, it is shown that the dynamic explicit finite element method can be used effectively to prevent the wrinkling problems advancely in the deep drawing process. Also, there is a good agreement between the experimental result and the dynamic explicit finite element analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.778-782
• /
• 2000

Deep drawing and ironing are the major process used today in manufacturing of battery case used in cellular phone and IMT-2000 from aluminum. The same technology is utilized in manufacturing of steel or aluminum rectangular cans for components of medical instrument, portable PC, walkman and so on. Most of these processes require multi-stage ironing following the deep drawing and redrawing processes. The practical aspects of this technology are well known and gained through extensive experiment and production know-how. However, the fundamental aspects of theses processes are relatively less known. Thus, it is expected that process simulations using FEM techniques would provide additional detailed information that could be utilized to improve the process condition. This paper illustrates the application of process modeling to deep drawing and redrawing operations with the cellular phone and IMT-2000. A commercially avaliable finite element code LS-DYNA3D was used to simulate deep drawing and redrawing operations.

• 한국염색가공학회지
• /
• 제11권5호
• /
• pp.44-54
• /
• 1999

Poly(ethylene 2,6-naphthalate), PEN, is a relatively well-known polymer used for engineering purposes. Naphthalene ring provides rigidity to the polymer backbone, thus, it elevated the glass transition temperature and enhanced mechanical properties. The structure and properties of PEN affect a processing conditions severely, and the high-thermal stability have been had a poor thermal processibility. Hence, the basic mechanism of solvent drawing, is very much the same as that of thermal drawing from glassy state since both involve the inducement of segmental mobility. The former achieves the goal by use of chemical energy, and the latter does so by use of thermal energy. Generally, the sorption of the solvent by the polymer has a plasticizing effect, and leads to a lowering of the glass transition temperature, $T_g$. In this paper, the dynamic viscoelasticity behavior in liquid-drawing process of an unoriented amorphous PEN films were investigated using Rheovibron. The results are as follows ： (1) For the drawing in silicone oil, the drawing below $T_g$. had $\alpha{2}$-dispersion due to an inhomogeneous taut structure. (2) For the drawing in water, the inhomogeneous taut structure reduced by the effect of plasticization even below $T_g$. (3) For the drawing in butanol, the only aliphatic segment in PEN have some molecular mobility but the mobility of the aromatic segment having naphthalene ring is nearly impossible. (4) For the drawing in dioxane/water mixing solvent, the solvent effect is complementary each other and accordingly the entire molecular conformation have stable state. (5) For the drawing in dioxane/butanol mixing solvent, the inhomogeneity of the taut structure and the aromatic segment increase with increasing the temperature and this tendencies correspond with that of the draw ratio.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 춘계학술대회 논문집
• /
• pp.71-79
• /
• 1994

Strip drawing of strain-hardening, viscoplastic materials with damage is analyzed by a rigid plastic finite element method. A process model is formulated using two state variables, one for strain hardening from slip dominated plastic distortion and the other for damage from growth of microvoids. Application of the model to steady state drawing is given via implementation in a consistent penalty finite element formulation. The predicted density changes as a result of void growth are compared to those from experiments reported in the literature. The effects of drawing conditions such as drawing speed and die angle on the mechanical property changes are studied.

• 소성∙가공
• /
• 제10권3호
• /
• pp.185-192
• /
• 2001

In order to obtain the optimal products in deep drawing process, elliptical deep drawing tests were carried out with several shape radii of the punch and die. As parameters on testing, shape radii of the punch and die were selected. In addition, the conventional shape radii have been determined by trial-and-error using industrial experience and post processing test, and only approximate shape radii of the punch and die have been presented. The optimal shape radii of the punch and die in elliptical deep drawing process with biaxisymmetric blank shape are proposed. In this study, we suggest the appropriate conditions to be applicable to the actual manufacturing processes through the experiment and finite element method.

• 가정과삶의질연구
• /
• 제31권1호
• /
• pp.61-72
• /
• 2013

This study evaluated Kinetic Family Drawing according to preschoolers' external problem behavior. To achieve this, 120 preschoolers who were four or five years old were investigated and data were statistically analyzed using mean, and chi square analysis with the SPSS Win 13.0 program. The preschoolers' family drawings were analyzed by using the method in Kinetic Family Drawing(Burns & Kaufman, 1972). First, regarding characteristics, the preschoolers in the aggression group rotated certain person or drew the figure from behind, the preschoolers in the delinquency group drew long arms, the figure from behind, and angular forms. Second, regarding action depicted, the preschoolers in both aggression and delinquency groups perceived the lower activity level of their fathers, dangerous situations, and excluded family interaction. Third, regarding symbols, the preschoolers in the delinquency group drew objects such as balls. Finally, regarding drawing style, the preschoolers in the delinquency group drew edges and underline.

• 한국정밀공학회지
• /
• 제33권8호
• /
• pp.635-640
• /
• 2016

The shell body is the main exterior part of a compressor, and production of shell bodies has increased along with a growing demand for air conditioners, refrigerators, air compressors, and so on. Cracks frequently occur in the process of welding a shell body. In this study, a deep drawing process for creating a shell body from a blank is developed. The technique consists of a four-step deep drawing and a two-step trimming process. Analysis is performed by DEFORM software to examine the safety of the deep drawing and trimming processes. The deep drawing process for the shell body developed in this study would have wide application in many industrial fields.