• Land and Housing Review
• /
• v.11 no.3
• /
• pp.93-101
• /
• 2020

Recently, as a BIM-based construction simulation system, 4D CAD tools using virtual reality (VR) objects are being applied in construction project. In such a system, since the expression of the object is based on VR image, it has a sense of separation from the real environment, thus limiting the use of field engineers. For this reason, there are increasing cases of applying augmented reality (AR) technology to reduce the sense of separation from the field and express realistic VR objects. This study attempts to develop a methodology and BIM module for the pre-construction verification system using AR technology to increase the practical utility of VR-based BIM objects. To this end, authors develop an AR-based drawing verification function and drawing object-based 4D model augmentation function that can increase the practical utility of 2D drawings, and verify the applicability of the system by performing case analysis. Since VR object-based image has a problem of low realism to field engineers, the linking technology between AR object and 4D model is expected to contribute to the expansion of the use of 4D CADsystem in the construction project.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.93-98
• /
• 2005

The purpose of this study is to confirm the improvement of formability of AZ31 magnesium alloy sheet by using local heating and cooling technique. For this, the experiments of warm deep drawing were done under the temperatures of $100^{\circ}C\~400^{\circ}C$, and the punch velocity of 10, 100mm/min. Also FE analysis under the temperatures of blankholder and die of $150^{\circ}C,\;225^{\circ}C\;and\;300^{\circ}C$ for tools(holder and die) was executed with considering heat teansfer. From the results, the formability of AZ31 magnesium alloy, espicially the temperatures of $225^{\circ}C\~250^{\circ}C$ for tools(holder and die)improved remarkably. And the experiments and simulations showed that necking under room temperature for tools occured under the part of punch shoulder while at $300^{\circ}C$ for tools, at the part of die shoulder.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.166-169
• /
• 2008

There is necessity that Manhwa in culture contents industry must establish more systematic process to be activated as original contents. Also, through theoretical system and analysis standard, must have industrial mind that have drawn interest elements. This paper has purpose that wish to establish systematic process of Manhwa drawing component. So, that wish to improve industrial efficiency. By the result, I presented process of Manhwa production by basis creation, story composition, storytelling, frame-layout, and drawing and drew each component and the result that detail step by step.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.77-82
• /
• 2002

This study try to attempt to manage on-line system of land cadastral by computing land registration information, for application to computerized cadastral work through Geo-Spatial Information System. And also, in order to consult D/B of cadastral information, cadastral non-coincidence area uncapable to D/B when land-survey, taking advantage of GSIS drawing made by the present condition drawing and the aerial photograph survey by general survey, makes actual cadastral control point by some selected investigators. And so, it can be compared and analysed by the result of the present survey and, through the interpretation of the relatives, it aims to improve the precision of survey technique in consulting cadastral information D/B in the future.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.18 no.2
• /
• pp.1-11
• /
• 2019

The purpose of this study is to make objective decisions in the use of closed schools through the development of utilization indicators for the efficient use of closed schools, which is expected to increase continuously. The research phase was largely carried out by drawing preliminary indicators for use in closed schools, drawing final indicators using big data, and quantifying indicators, and finally objectifying them through quantification. The institution intends to apply and verify the facility based on future indicators. This study has implications for the application of big data analysis methods that have not been attempted in planning and research for the use of closed school facilities to date.

• STI Policy Review
• /
• v.6 no.2
• /
• pp.54-86
• /
• 2015

The study examines the U.S. Small Business Innovation Research (SBIR) program, with a focus on the recent Reauthorization, and compares, in the political context, the U.S. and East Asian countries-Japan, Korea and Taiwan-that adopted the U.S. SBIR program. For the systematic analysis and cross-country comparison, the study employs Kingdon (2003)'s framework-his political theory and Garbage Can Model-to identify political participants and processes underlying the SBIR Reauthorization and to analyze the differences in problem, policy, and politics streams between the U.S. and East Asian countries. For the cross-country comparison, specifically, the study uses various data sources such as OECD, Global Entrepreneurship Monitor, Hofstede's Cultural Dimensions, and World Value Survey. Based on the analysis outcomes, implications of U.S. practices on East Asian countries are extracted as follows. East Asian countries tend to: Have higher entrepreneurial aspiration while lower entrepreneurial activity and attitude than the U.S.; bear higher long term orientation and uncertainty avoidance while lower individualism than the U.S.; and have greater expectations of technology development and higher confidence in political parties while participating less in political action than the U.S. Drawing on the differences, the following policy recommendations are suggested. East Asian countries should: Improve entrepreneurs' access to resources (in particular, financial resource) in order to link their high entrepreneurial aspiration to actual entrepreneurial activities; cultivate failure-tolerating culture and risk-taking entrepreneurs, for instance, by providing a second chance to SBIR-participating businesses that failed to materialize their innovative ideas; and leverage their high expectations of new technology in order to take bold actions regarding their SBIR programs, and update the programs by drawing out constructive dialogues between SBIR stakeholders.

• The Research Journal of the Costume Culture
• /
• v.20 no.3
• /
• pp.403-415
• /
• 2012

This study did a comparative analysis on the patterns of several male bodice slopers, followed by evaluating the appearance through a virtual garment simulation, which used a three-dimensional virtual garment system. Through this process, this study attempted to comparatively analyze the suitability of the garment or each sloper according to body parts. The analysis of the drawing formulas of bodices slopers had the following results. With a standard chest size, all six slopers had a 1:4 ratio for a front and back chest size; 1:5 or 1:6 for a front and back breast size 1:5 or 1:4 for a neck base circumference; and 1:20 or 1:12 for the chest size. When comparing the anthropometric figures and the actual measurements of each body part for the bodice slopers, the actual measurements secured extra amounts in the drawing process. The evaluation results for appearance of the six men's bodice slopers showed that the slopers used by companies (E and F) had top scores followed by the slopers made for (C and D), while the sloper for education (A) received the lowest scores. Regarding the results of the variance analysis verifying the significant difference between the slopers, twenty-five items had significant differences with the exception of four items on the front side and one item on the backside.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.1
• /
• pp.260-280
• /
• 2020

Cyber-attacks emerge in a more intelligent way, and various security technologies are applied to respond to such attacks. Still, more and more people agree that individual response to each intelligent infringement attack has a fundamental limit. Accordingly, the cyber threat intelligence analysis technology is drawing attention in analyzing the attacker group, interpreting the attack trend, and obtaining decision making information by collecting a large quantity of cyber-attack information and performing relation analysis. In this study, we proposed relation analysis factors and developed a system for establishing cyber threat intelligence, based on malicious code as a key means of cyber-attacks. As a result of collecting more than 36 million kinds of infringement information and conducting relation analysis, various implications that cannot be obtained by simple searches were derived. We expect actionable intelligence to be established in the true sense of the word if relation analysis logic is developed later.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.320-326
• /
• 2017

Multistage deep-drawing technology is used widely in the production of mobile phone battery cases to improve productivity and economy. To ensure adequate capacity and rigidity, such cases are fabricated as a rectangular cup with a high slender ratio. The multistage deep-drawing of a rectangular cup entails a high slender ratio, and the heights of the product sides may be non-uniform because of the complicated deformation mechanisms. This causes problems in product assembly that affects the surface quality of the case. This study examined a blank shape that minimizes the height variations of the product to resolve the aforementioned problems. Optimization design and analysis were performed to identify the shape that yields the least variation. The long and short sides of an oval blank were set as the design variables. The objective function was set to yield the lowest height difference, and the thickness reduction rate of the product was set to the target range. In addition, the height of the final shape was set as a constraint. The height difference was minimized successfully using the optimized design. The design process of the initial blank for all rectangular shapes can be automated in the future.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.93-96
• /
• 2001

Design sensitivity is calculated in the sheet metal forming process with an elasto-plastic finite element analysis and a direct differentiation method The sensitivity analysis is concerned with the time integration the constitutive relation considering planar anisotropy, shell elements and the contact scheme. The present result is compared with the result obtained with the finite difference approach in deep drawing processes. The obtained sensitivity information is applied to the simple optimization process for the sheet metal forming process.