• Journal of Advanced Marine Engineering and Technology
• /
• 제39권6호
• /
• pp.614-619
• /
• 2015

본 연구는 자율무인잠수정의 운동성능을 예측하기 위한 동역학모델에 관한 연구이다. 이 모델은 선체의 동역학 상태변수들과 잠수정의 운동을 결정하는 힘들의 항으로 구성되어 있다. 힘에 영향을 주는 항은 유체정역학적 힘, 부가질량에 의한 힘, 유체동역학적 감쇠력, 그리고 양력과 항력으로 구성된다. 이 힘의 항들을 이론식과 유체동역학해석법에 의해 구하였다. 수중운동 시뮬레이션에는 PD제어기를 사용하였다. 또한 유체항력은 수조시험을 통해서 검증하였고, 무인잠수정의 운동성능은 인근 실해역에서의 경유점 추종시험을 통해서 부분적으로 검증하였다.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.75-80
• /
• 1996

The importance of the impact force on the vertical offshore circular structure member in the surf zone due to the breaking wave has been recognized recently. In this paper characteristics of breaking wave forces and the corresponding estimation procedures for them are investigated. For the characterization of the wave forces, three parts, drag force, inertia force, impact force are categorized and identified, respectively. Among them the impact force is maimly studied and the concise form of the force is proposed with the application scheme for the design of offshore circular structure member. The resulting form porposed here for impact force is well coincided with former research results by other people. Except the impact force, so called Morison equation can be employed for the common offshore structure design. The drag force and inertia force are represented as convertionally for the profile except the breaking part. In the numerical example, for thpical sea condition and the member size, the proposed procedures for the breaking wave forces calculation are demonstrated. It is found that the impact force is the most deminant one comparing with inertia and drag forces in the surf zone.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.253-258
• /
• 2001

Control of drag force on a circular cylinder using a detached splitter plate is numerically studied for laminar flow. A splitter plate with the same length as the cylinder diameter(d) is placed horizontally in the wake region. Its position is described by the gap ratio(G/d), where G represents the gap between the cylinder base point and the leading edge of the plate. The drag varies with the gap ratio; it has the minimum value at a certain gap ratio for each Reynolds number. The drag sharply increases past the optimum gap ratio; this seems to be related to the sudden change in the bubble size in the wake region. This trend is consistent with the experimental observation currently available in case of turbulent flow. It is also found that the net drag coefficient significantly depends on the variation of base suction coefficient.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.129-134
• /
• 2001

The drag reduction of the cylinder having square dimpled surface was studied by the measuring the drag force acting on the cylinder. The level of the drag reduction was changed by the arrangement shape of the square grooves and Reynolds number. The drag of the cylinder was reduced about 28% with proper arrangement of square grooves. The flow field around the cylinder having grooves at the minimum drag was visualized by using post color ink in order to see the influence of the grooves. In this case, the separation points were sifted rearward and the wake region was smaller than that of the smooth cylinder.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권2호
• /
• pp.233-239
• /
• 2002

The drag reduction of the cylinder having square dimpled surface was studied by the measuring the drag force acting on the cylinder. The level of the drag reduction was changed by the arrangement shape of the square grooves and Reynolds number. The drag of the cylinder was reduced about 28% with proper arrangement of square grooves. The flow field around the cylinder having grooves at the minimum drag was visualized by using post color ink in order to see the influence of the grooves. In this case, the separation points were silted rearward and the wake region was smaller than that of the smooth cylinder.

• 한국자동차공학회논문집
• /
• 제14권2호
• /
• pp.194-201
• /
• 2006

Roof-fairing and deflector system have been used on heavy-duty trucks to minimize aerodynamic drag force not only for driving stability of the truck but also for energy saving by reducing the required driving power of the vehicle. In this study, a numerical simulation was carried out to see aerodynamic effect of the drag reducing device on the model vehicle. Drag and lift force generated on the five different models of the drag reducing system were calculated and compared them each other to see which type of device is efficient on the reduction of driving power of the vehicles quantitatively. An experiment has been done to see airflow characteristics on the model vehicles. Airflow patterns around the model vehicles were visualized by smoke generation method to compare the complexity of airflow around drag reducing device. From the results, the deflector systems(Model 5,6) were revealed as a better device for reduction of aerodynamic drag than the roof-fairing systems(Model 2,3,4) on the heavy-duty truck and it can be expected that over 10% of brake power of an engine can be saved on a tractor-trailer by the aerodynamic drag reducing device at normal speed range($80km/h{\sim}$).

• 한국전산유체공학회지
• /
• 제7권3호
• /
• pp.1-8
• /
• 2002

The counter jet flow which is injected against the free stream at stagnation region of blunt body for improvement of aerodynamic performance has been studied by using upwind Navier-Stokes method. The variations of drag force and upwind forward penetration depth due to changes in the stagnation thermodynamic properties of counter jet flow such as total pressure, Mach number, and total temperature have been studied. The results show that the changes in the stagnation pressure and Mach number have large effects on the wall pressure and drag force, but the total temperature does not affect the wall pressure and drag force.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.397-400
• /
• 2006

In this study, we experimentally investigate the possibility of skin-friction drag reduction by series of transverse cavities in a turbulent boundary layer flow. The effects of cavity depth (d), cavity length (l) and cavity spacing (s) on the skin friction drag are examined in the range of $Re_{\theta}\;=\;4030\;{\sim}\;7360$, $d/{\theta}_0\;=\;0.13\;{\sim}1.03$, l/d = 1 ~ 4 and s/d = 5 ~ 20. We perform experiments for twenty different cavity geometries and directly measure total drag force using in-house force measurement system. In most cases, the skin friction drag is increased. At several cases, however, small drag reduction is obtained. The variation of the skin ftiction drag is more sensitive to the cavity length than to the cavity depth or cavity spacing, and drag is reduced at $s/l\;{\geq}\;10$ and $l/{\theta}_0\;{\leq}\;0.26$ irrespective of the cavity depth. At $l/\bar{\theta}_0\;=\;0.13$ and s/l = 10, maximum 2% drag reduction is achieved. When the skin friction drag is reduced, there is little interaction between the flows inside and outside cavity, and the flow changed by the cavity is rapidly recovered at the following crest. A stable vortex is formed inside a cavity in the case of drag reduction. This vortex generates negative skin friction drag at the cavity bottom wall. Although there is form drag due to the cavity itself, total drag is reduced due to the negative skin friction drag.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.171-181
• /
• 2017

2상 횡 유동은 응축기, 증발기와 원자력의 증기 발생기와 같은 열교환기의 튜브와 셀 사이에 존재한다. 공기/물의 2상 유동에 놓인 관군에 작용하는 항력을 실험적으로 평가하였다. 2상 유동에 놓인 관군은 정사각형 배열이다. 피치 직경 비는 1.35이었고, 실린더의 직경은 18 mm이다. 관군에 유동방향으로 작용하는 항력을 측정하여 항력계수와 2상 유동 감쇠비를 계산하였다. 2상 유동 감쇠비는 균질 2상 유동의 이론식을 사용하여 구하여 실험의 결과와 비교하였다. 압력과 항력의 상관계수를 실험결과를 고려하여 평가하였다. 상관계수는 이론적으로 항력을 계산할 때에 사용된다. 질량유량을 증가할수록 측정된 항력으로부터 구한 항력계수와 감쇠비가 균질 유동의 이론적 결과와 잘 일치함을 보이고 있다. 결과적으로 충분히 큰 질량 유량의 기포 유동인 경우에는 감쇠비를 균질 유동에 근거한 이론식으로 계산할 수 있다.

• 한국전산구조공학회논문집
• /
• 제29권2호
• /
• pp.149-159
• /
• 2016

본 연구에서는 Navier-Stokes solver에 기초한 TWOPM-3D와 자유수면을 효과적으로 추적할 수 있는 VOF법을 결합한 수치해석법으로 연안역의 육상 교량에 작용하는 고립파에 의한 지진해일파력을 수치적으로 검토하였으며, 연직벽체와 연직주상구조물에 작용하는 단파파력에 관한 기존의 실험치와 비교 검토하여 본 수치해석의 타당성을 검증하였다. 실제로 피해를 입은 교량에 대해 지진해일파고의 변화에 따른 파력의 특성을 수치실험을 통하여 조사하였으며, 육상 교량에 작용하는 지진해일파력의 추정에 항력 성분만을 고려한 Morison식으로부터 얻어진 항력계수의 결과와 설계기준과의 비교로부터 본 3차원 수치해석의 유용성을 논의하였다. 또한, 지진해일파력을 보다 고정도로 추정할 수 있는 합리적인 방법으로 항력과 관성력을 동시에 고려한 Morison식의 적용을 제안하였다.