• 제목/요약/키워드: Draft system

검색결과 493건 처리시간 0.028초

Numerical Study on the Performance Analysis of Plume Abatement Cooling Tower with Dry Type Heat Exchanger

  • Kim, Byung-Jo;Choi, Young-Ki
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • 제13권2호
    • /
    • pp.61-70
    • /
    • 2005
  • This study treats the numerical analysis of performance and design for plume abatement wet/dry cooling tower with a dry type heat exchanger. A two-dimensional analysis is performed using the finite volume method for mechanical draft counterflow and crossflow tower. For a coupling problem between water and air system, a turbulent two phase flow is considered. The Effectiveness-NTU method is used for modeling of the dry type heat exchanger. The parametric simulations such as the relative flowrate of air and attachment length of an air mixer are performed to examine the effect on plume abatement. It is found that if the relative air flowrate ratio and the adequate air mixer type are chosen well in addition to the ratio of water to air flowrate, the loss of cooling capacity and the additional cost are reduced and the plume is abated.

철도차량 충돌 안전성 분석 (Crashworthiness Analysis of railway Rolling Stock)

  • 이강욱;백운천;박상규
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
    • /
    • pp.393-400
    • /
    • 1998
  • In this study, the crash situations and general crash analysis methods of railway rolling stocks were explained. To calculate the applied load and the maximum stress in the carbody when two aluminum railway vehicles were shunted, the finite element models for the carbody and the coupling system were made. The characteristic curve of draft gear which had a function to reduce impact force was modeled by nonlinear bar elements and the carbody was modeled by shell elements. Two shunting speeds, 5km/h and 8km/h, were considered and the results were analyzed and compared with static analysis case. Also, the aluminum railway vehicle with 60km/h was crashed against rigid wall to examine the global behavior of the carbody.

  • PDF

Loads and motions for a spar-supported floating offshore wind turbine

  • Sultania, Abhinav;Manuel, Lance
    • Wind and Structures
    • /
    • 제22권5호
    • /
    • pp.525-541
    • /
    • 2016
  • An offshore wind turbine supported by a spar buoy floating platform is the subject of this study on tower and rotor extreme loads. The platform, with a 120-meter draft and assumed to be sited in 320 meters of water, supports a 5 MW wind turbine. A baseline model for this turbine developed at the National Renewable Energy Laboratory (NREL) is employed in stochastic response simulations. The support platform, along with the mooring system consisting of three catenary lines, chosen for loads modeling, is based on the "Hywind" floating wind turbine concept. Our interest lies in gaining an understanding of the dynamic coupling between the support platform motion and the turbine loads. We first investigate short-term response statistics using stochastic simulation for a range of different environmental wind and wave conditions. From this study, we identify a few "controlling" environmental conditions for which long-term turbine load statistics and probability distributions are established.

SMIL 2.0 기반 멀티미디어 통합 시스템의 설계 및 구현 (Design and Implementation of a Multimedia Integration System has on the SMIL (Synchronized Multimedia Integration Language) 2.0)

  • 원덕재;김세영;송준홍;신동규;신동일
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2001년도 봄 학술발표논문집 Vol.28 No.1 (A)
    • /
    • pp.142-144
    • /
    • 2001
  • 인터넷과 통합된 멀티미디어 기술의 발전 및 초고속 통신망의 보편적인 사용으로 인해 유기적으로 통합된 멀티미디어 컨텐츠에 대한 웹 서비스의 필요성이 대두되었다. 이에 따라 1998년 W3C(World Wide Web Consortium)에서 제안된 XML(eXtensible markup Language) 기반의 통합 멀티미디어 표현 언어인 SMIL(Synchronized Multimedia Integration Language) 1.0이 발표되었고, 기능이 확장되어 2000년 9월 SMIL 2.0으로 최종 Working Draft안이 발표되었다. 본 논문에서는 웹 컨텐츠 제공자 및 개인 사용자에게 SMIL 컨텐츠 저작을 위한 자동 생성 모듈 및 전용 저작 도구를 제공하고, SMIL 컨텐츠 데이터베이스 서버 및 재생기와의 통합으로 원활한 SMIL 컨텐츠 서비스 환경을 제공하는 통합 멀티미디어 시스템의 설계 및 구현을 제시하였다.

추진축계 횡진동 1차 기진력에 의한 여객.차도선의 선체 상부진동 (Passenger & Car Carrier's Superstructure Vibration induced by the 1st order Excitation of Whirling Vibration on the Propulsion Shafting System)

  • 이돈출;고재용;김정렬
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 추계학술대회논문집
    • /
    • pp.301-306
    • /
    • 2000
  • Small passenger and car carrier ships are mainly used as a connection way between land and small islands. And these ships should be designed to enlarge the capacity of passenger and car loading within limited space and draft. So the resonances of various vibrations exist in normal operation range of engine and propulsion shafting. In this paper, hull's superstructure vibration which was especially induced by the 1st order excitation of whirling vibration on the 2-engines and 2-propulsion shafting systems is introduced. Also these are verified via the theoretical analysis using transfer matrix method and FEA software ANSYS and its vibration measurement.

  • PDF

건물 및 건물부재의 차음성능 측정을 위한 표준 측정실의 KS 규격화에 관한 연구 (A Study on the KS Standardization of Test Rooms for the Measurement of Sound Insulation in Buildings and. of Building Elements)

  • 오양기;김흥식;김선우
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 추계학술대회논문집
    • /
    • pp.336-339
    • /
    • 2000
  • Revision of KS, Korean Standards, is currently actively discussed. It is just the time for a new world class standards under the new system with WTO, World Trade Organization. This paper is a part of "Researchs on the Standards in the Building Acoustic Field", as one of KS revision projects. The aim of this study is to define the requirements of laboratory test facilities with suppressed flanking transmission. In the former KS, there is no items matched with this purpose. Therefore comparing several results with different measuring conditions of a laboratory and results between different laboratories was impossible. On these basis, a new part of KS is proposed, and some problems remained and further discussions in the proposed draft are described in this study.

  • PDF

Development of Quality Management Indicators for Educational Institutions

  • Jin, Sunmi
    • International Journal of Contents
    • /
    • 제18권3호
    • /
    • pp.34-48
    • /
    • 2022
  • The purpose of this study was to develop indicators for quality management of educational institutions, and to achieve this, literature analysis and expert interviews were conducted. Through literature analysis, the components of TQM were derived focusing on factors to improve the quality of education, engineering education accreditation standards, and a representative education accreditation system, were considered. Additionally, seven areas as well as 32 indicators required for education quality management, were derived by comparing the EFQM excellence model and the MBNQA education model, applied for quality management of companies and institutions. By comparing and synthesizing these results, a draft was developed for the quality management index of educational institution. Next, opinions on correction and supplementation of quality management indicators derived from literature analysis, were collected from five education experts. From the comparisons and integration of these results, eight criteria (leadership, strategy, customers, people, facilities and environment, curriculum management, curriculum improvement, and performance management) and 34 indicators, were proposed for quality management indicators for educational institutions. Curriculum management, people, and performance management criteria were considered more significantly in quality management of educational institutions, and several implications are suggested based on the study results.

TEN MANAGEMENT STRATEGIES TO AVOID CONSTRUCTION CONFLICTS

  • Nirmal Kumar Acharya;Young Dai Lee;Soo Yong Kim;Yong Duek Kim
    • 국제학술발표논문집
    • /
    • The 1th International Conference on Construction Engineering and Project Management
    • /
    • pp.709-713
    • /
    • 2005
  • The conflict problems encountered in the construction projects led to prolonged delays in implementation, interruptions and sometimes suspension. This paper has described ten fundamental management principles to avoid conflicts in construction field and increase the productivity. They are: i) hire good (not cheap) construction professionals ii) set reasonable time and cost goals iii) recognize contractors and designers are in business to make profit iv) draft a clear contract document v) pick a suitable project delivery system vi) implement a front-end approach vii) accept construction project as a dynamic process viii) need of education and training of professionals ix) accountability and teamwork in construction site, and x) avoid negligence.

  • PDF

중국 민용항공법 개정 최근 동향과 주요 법적쟁점 (Study on the Legal Issues of New Draft of Civil Aviation Law in China)

  • 이화
    • 항공우주정책ㆍ법학회지
    • /
    • 제31권2호
    • /
    • pp.177-214
    • /
    • 2016
  • 중국 민용항공법은 1995년에 처음으로 제정되고 나서 20여년 사이에 처음으로 전면적인 개정이 이뤄졌다. 이번 개정은 20여년 동안의 민용항공법 시행 실천경험에 비추어, 국내외 민용항공법의 입법과 민용항공 국제협약의 최신성과를 참조하고 항공안전에 대한 감독과 관리를 강화하고 소비자 권익을 보호함으로써 민용항공활동이 안전하고 질서 있게 발전하고 민용항공활동에 관련되는 여러 당사자의 이익의 균형을 도모하고 민용항공사업 발전을 촉진함으로써 중국을 민용항공 강대국으로 건설하는데 유력한 법적 보장을 마련하는 것을 지도사상으로 하고 있다. 이번 개정안에서는 항공안전을 강화하기 위하여 항공제품의 안정생산 각 단계에서의 담당자의 책임과 관련 부문의 관리책임을 명확히 하였고, 공공항공운송기업의 항공기 추적능력의 설립을 강화하였으며 위험물품운송에 대한 법적인 규제를 강화하였다. 또한 이번 개정안에서는 안보를 강화하는 업무원칙, 관련 기관의 직책과 불법소란행위 등을 명확히 하고 이를 위반하는 경우 부담해야 하는 법적책임을 상당히 강화하였다. 국가에서는 민용항공산업의 발전을 지지한다는 원칙하에 민용항공산업의 발전을 위하여 자금투자를 위한 법적 보장을 마련하고 각급 정부에서 공항건설과 발전을 촉진하는데 있어서의 직책을 명확히 하였으며, 정부의 관리와 통제가 과도하여 민용항공산업의 발전과 자원배치에 불리한 심사비준제도를 등록제도로 변경함으로써 정부당국의 권한을 줄이고 공공운송기업의 설립조건을 조정하는 등 일련의 통용항공산업의 발전을 위하여 법적인 제도를 개혁하였다. 이외에도 소비자 권익을 보호하는 획기적인 규정들이 새로 개정되었는데 항공운송총조건을 운송계약의 구성부분임을 명확히 밝히고 항공기 지연에 관한 항공사의 책임을 묻는 지도원칙을 확립하고 1999년 몬트리올협약에 따라 항공운송인의 배상책임한도액과 배상책임제도를 조정하였다. 이외에도 항공기사고 발생시 지면제3자에 대한 손해배상에 대한 리스크를 줄이기 위하여 항공운송인의 보험가입을 적극적으로 격려하는 규정을 마련하였다. 동 개정안은 비록 현행 민용항공법상의 미비점을 상당부분 보완하였지만 국내항공운송과 국제항공운송인의 책임을 차별화하여 별도의 규정을 두었다는 점, 항공기내에서의 핸드폰 사용 등을 소란행위로 포함시켰다는 점으로 보아 항공안전을 이유로 지나치게 여객의 권익을 제한한 것은 아닌지, 항공기 산업발전을 위한 정부의 격려정책이 중국이 가입한 WTO 협정에 위배될 소지를 남겼다는 등 부분은 향후 더 검토하여 신중하게 개정안에 반영해야 할 사안이다. 현재 민용항공법 개정안은 의견수렴을 거친 상태이다. 그러나 전국인민대표대회 상무위원회 2016년 10월 31일부터 11월 7일 까지의 심사 및 의사결정 일정표를 보면 민용항공법 초안이 포함되지 않았다. 따라서 2017년에 민용항공법 개정초안이 인민대표대회 상무위원회 심사 및 의견결정 일정에 포함되는 것이 급선무 일 것이며 일단 동 일정에 포함되어야 만이 법 개정이 신속하고 효과적으로 진척이 될 수 있다. 따라서 그 이전까지는 의견의 불일치가 많은 조항부터 전문가들과 사회공중의 광범위한 논의를 진행하게 될 것이다.

여수해만 특정해역의 해상교통시스템 설정에 관한 연구 (A Study on Proposal of the Improved Marine Traffic System for Special Sea Area on Yeosu Bay)

  • 정재용;김철승;정중식;박성현;정대득
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 춘계학술대회 논문집
    • /
    • pp.205-212
    • /
    • 2005
  • 여수해만의 교통안전특정해역은 1988년에 설정된 이후 선박 입항 척수 및 톤수가 크게 변하는 등 해상교통환경 급격하게 변화된 것에도 불구하고, 통항분리가 되지 않은 채 흘수제약선의 깊은수심항로만 지정되어 있고 흘수제약선 이외의 통항선박들에 대한 항로체계는 미비한 실정이다. 또한 여수해만 입구의 A, B, C, W 묘박지에서 항로로 진입하는 선박과 조업어선 등의 무질서한 운항으로 통항선박의 안전에 지장을 초래하고 있는 실정이다. 본 연구에서는 여수해만 특정해역에 대하여 장래의 교통여건까지 고려하여 도출된 문제점에 대한 개선방안을 강구하는 등 해양사고 예방을 위한 종합적인 해상교통체계 설정에 목적이 있다.

  • PDF