• 한국운동역학회지
• /
• 제27권2호
• /
• pp.125-132
• /
• 2017

Objective: The aim of this study was to investigate the effect of targeted knee flexion angle on biomechanical factors of knee joint between upward and downward phases during the forward lunge. Method: Eight elderly subjects (age: $22.23{\pm}1.51years$, weight: $69{\pm}6.63kg$, height: $174.88{\pm}6.85cm$) participated in this study. All reflective marker data and ground reaction force during a forward lunge were collected. The knee joint movement and reaction force and joint moment at maximum knee flexion angle were compared by repeated measures one-way analysis of variance (ANOVA) (p<.05). The peak knee joint reaction force and joint moment between upward and downward phases were compared by repeated measures two-way ANOVA (p<.05). Results: The anterior and vertical knee joint movements, reaction force, and extensor moment of $80^{\circ}$ targeted knee flexion condition at maximum knee flexion angle was greater than both $90^{\circ}$ and $100^{\circ}$ conditions (p<.05). The $80^{\circ}$ knee flexed angle condition had greater peak joint reaction force and extensor moment compared with both $90^{\circ}$ and $100^{\circ}$ conditions between upward and downward phases during the forward lunge. Conclusion: As the targeted knee joint flexion angle increases, knee joint movement and kinetic variables become greater during the forward lunge exercise.

• 한국수자원학회논문집
• /
• 제46권3호
• /
• pp.301-314
• /
• 2013

기후변화로 야기될 수 있는 태양복사에너지의 공간적인 불균형은 수자원을 포함한 전반적인 생태 시스템에서의 에너지 불균형을 초래한다. 따라서 정확한 에너지의 흐름을 이해하기 위하여 정량적인 관측을 목적으로 하는 플럭스 타워가 세계 곳곳에 설치되어 운영되고 있다. 국내의 주역에서도 플럭스 타워를 통안 관측이 실시되고 있는 데, 본 연구에서는 이 중 설마천과 청미천 유역의 플럭스 타워의 자료를 대상으로 수문기상 및 생태학적으로 중요한 역할을 하는 에너지원인 하향 단파 및 장파 복사량과 순복사량을 기존의 연구에서 제안된 물리식을 기반으로 계산하고, 산정된 순복사량과 관측 자료를 비교 검증하였다. 이를 통하여 관측이 미흡한 수문기상인자에 대해 기존의 물리적인 방법의 사용 가능성 및 관측 자료의 활용 가능성을 확인하였다.

• 대기
• /
• 제19권4호
• /
• pp.319-329
• /
• 2009

The intensive dust observation experiment has been performed at Korea Global Atmosphere Watch Center (KGAW) in Anmyeon, Korea during each spring season from 2007 to 2009. Downward and upward hyper-spectral spectrums over the dust condition were measured to understand the hyper-spectral properties of Asian dust using both ground-based Fourier Transform Infrared Spectroscopy (FT-IR) and space-borne AIRS/Aqua. To understand the impact of the Asian dust, a Line-by-Line radiative transfer model runs to calculate the high resolution infrared spectrum over the wave number range of $500-500cm^{-1}$. Furthermore, the radiosonde, a $PM_{10}$ Sampler, a Micro Pulse Lidar (MPL), and an Aerodynamic Particle Sizer (APS) are used to understand the vertical profile of temperature and humidity and the properties of Asian dust like concentration, altitude of dust layer, and size distribution. In this study, we found the Asian dust distributed from surface up to 3-4 km and volume concentration is increased at the size range between 2 and $8{\mu}m$ The observed dust spectrums are larger than the calculated clear sky spectrums by 15~60K for downward and lower by around 2~6K for upward in the wave number range of $800-1200cm^{-1}$. For the characteristics of the spectrum during the Asian dust, the downward spectrum is revealed a positive slope for $800-1000cm^{-1}$ region and negative slope over $1100-1200cm^{-1}$ region. In the upward spectrum, slopes are opposed to the downward one. It is inferred that the difference between measured and calculated spectrum is mostly due to the contribution of emission and/or absorption of the dust particles by the aerosol amount, size distribution, altitude, and composition.

• The Korean Journal of Pain
• /
• 제7권2호
• /
• pp.211-216
• /
• 1994

Celiac plexus block is performed to relieve intractable upper abdominal cancer pain. Generally, celiac plexus blocks have been performed under control of X-ray fluoroscopy to determine the position of the needle tip and the spread of contrast media. During the period from March 1992 to February 1994, we have performed 21 cases of neurolytic celiac plexus block to alleviate pain of intra-abdominal malignancy. We retrospectively evaluated the location of the needle tip and the spread of contrast media. P-A views of simple abdomen demonstrated the locations of the needle tip: 66.7% of the left needle tips were in upper 3/1 of L1 (6 cases) and $T_{12}-L_1$ interspace (8 cases), 50% of the right needle tips were in upper 1/3 of $L_1$, (6 cases) and $T_{12}-L_1$ interspace (4 cases). Contrast media from the right needle spread upward to middle 1/3 of $T_{10}$ (5 cases) and middle 1/3 of $T_{11}$ (5 cases), downward to middle 1/3 of $L_1$ (6 cases) and lower 1/3 of $L_1$ (3 cases). Contrast media from the left needle were spread upward to middle 1/3 of $T_{10}$ (5 cases) and evenly to other spaces, downward to middle 1/3 of $L_1$, (4 cases) and $L_1-L_2$ interspace (6 cases). We analyze the spread of contrast media according to distance from needle tip by authors score system. Contrast media of right needle spread upward 6.1 and downward 3.4, that of left needle spread upward 6.5 and downward 3.7.

• 산업경영시스템학회지
• /
• 제43권1호
• /
• pp.7-15
• /
• 2020

It is a general phenomenon for manufacturers to provide vertically differentiated product line for more profit through improved market coverage. For such manufacturers, the compatibility between vertically differentiated products is an important decision issue. Some manufacturers provide full compatibility between high and low version products, whereas some provide only downward compatibility for the purpose of recommending high version product. In this study, the two representative compatibility strategies, full or downward, between vertically differentiated products produced by a single manufacturer are analyzed, especially under network externality and in the viewpoint of profit maximization. To do this we used a market model which captures the basic essence of vertical differentiation and network externality. Based on the proposed market model, the profit maximizing solutions are derived and numerically analyzed. The results can be summarized as follows : (1) Regardless of compatibility strategy, under network externality, vertical differentiation is always advantageous in terms of profit. (2) The full compatibility strategy is shown to be the most advantageous in terms of profit. In addition, it is necessary to make quality difference between differentiated products as wide as possible to maximize profit. (3) To gradually drive low version product out of the market and shift the weight pendulum of market to high version product, it is shown that the downward compatibility strategy is essential. Unlike intuition, however, it is also shown that in order to drive low version product out of market, it is necessary to raise the quality of the low version product rather than to lower it.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.447-476
• /
• 1994

This study was performed to evaluate the initial reaction of maxillofacial complex to the Class II intermaxillary and the anterior vertical elastic forces on the six types of archwires including multiloop edgewise arch wires(MEAW). A human dry skull was used for this purpose and this investigation was done by holographic interferometry. Based on such investigation, the fringe pattern and the number of fringes of each condition were compared and analyzed. The findings of this study were as follows: 1. As the orthodontic forces increased, the amount of displacement increased. 2. As the orthodontic forces were applied, the fringes were shown not only in the teeth and the maxilla but also in the adjacent bones, i.e., temporal bone, zygomatic bone, nasal bone, frontal bone and sphenoid bone. And the direction of fringe pattern and the number of fringes were different from each other by the sutures. 3. As the long Class II elastic forces were applied, the backward-downward displacements of the anterior teeth and the maxilla were shown, and backward displacement of the former were grater than those of the latter. And backward displacements were greater by the long Class II elastic forces than by the short Class II elastic forces. 4. As the anterior vertical elastic forces were applied, downward displacements of the anterior teeth and the maxilla were shown, and the downward displacements of the former were greater than those of the latter relatively. 5. The downward displacements of the anterior area to the anterior vertical elastic forces of the MEAW were greater than those of other archwires. In addition, the more tip-back bend was applied, the more displacement was seen. 6. As the Class II intermaxillary forces and the enough anterior vertical elastic forces were applied on the MEAW with tip-back bend, there was an intrusive effect of the posterior teeth.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제31권3호
• /
• pp.274-278
• /
• 2005

Purpose : Prediction for soft tissue change after orthognathic surgery is very important for the final esthetics. In this study, we have tried to get the amount of upper lip movement relative to bony segment movement after anterior segmental osteotomy by cephalmetric analysis to predict final upper lip position after surgery. Material and Methods : 20 patients was studied on whom anterior segmental osteotmy as performed by Cupar method during the years 2002 to 2003. Cephalometric radiograph were taken at 1month before surgery and 6 month after surgery. Change of upper lip was measured on landmark Ls and Sto relative to hard tissue (landmark Ia) setback on these X-rays and analyzed. Results : 1. Upper lip setback movement. Setback of upper lip showed proportional relation to the hard tissue setback and the ratio was about 84%(p=0.001). 2. Upper lip downward movement. Downward movement of upper lip showed no proportional relation to hard tissue setback And the amount was mean 1.38 mm and SD 1.21mm (p=0.922). Conclusion : The posterior movement of upper lip is affected by hard tissue movement and shows good proportional change whereas downward movement is not so much influenced by hard tissue movement. And we think slight downward movement shown in this study could be explained by the V-Y closure performed during surgery.

• 대한지리학회지
• /
• 제46권2호
• /
• pp.115-133
• /
• 2011

야마다의 산지차수구분법은 상향식으로 정의할 수 있는데, 이는 저차수 산지들이 모여 점차 차상위차수 산지를 이룸과 동시에 산지의 영역과 규모가 확대되기 때문이다. 하지만 산지를 총체적으로 이해하고 각종 산지 정보를 체계적으로 관리하기 위해서는, 특정 규모의 산지를 이루는데 기여한 차하위차수 산지만을 강조하는 야마다의 산지구분법에는 한계가 있다. 왜냐하면 상위차수 산지내에는 차하위차수 산지뿐만 아니라 독립된 차차하위, 차차차하위 산지도 포함되어 있기 때문이다. 이와 같은 문제점을 해결하기 위해 본 연구에서 제시된 산지분류법은 기본적으로 하향식이다. 여기서 하향식이란 최고위차수 산지를 구성하는 차하위차수 산지, 다시 이를 구성하는 차차하위차수 산지로 산지를 세분해나가 최종적으로 2차수 산지를 구성하고 있는 1차수 산지까지 분류해 나가는 것을 의미한다. 본 연구에서는 야마다 산지차수구분법을 근간으로 특정 산체를 구성하고 있는 모든 산지 요소를 체계적으로 분류하고 구분된 산지에 대한 새로운 명명법을 제시함으로써 산지정보의 종합적 체계적 관리를 위한 데이터베이스의 근간을 마련했다.

• Nuclear Engineering and Technology
• /
• 제26권4호
• /
• pp.493-501
• /
• 1994

하향 가열 평판에서의 풀비등 임계열유속 실험이 수행되었다. 이는 원자로에서의 노심용융사고 발생시 그 결과를 완화시키는 한 방법으로 고려되고 있는 원자로용기 외부 냉각 (Ex-Vessel Flooding) 개념과 연관된다. 대기압하, 포화상태 물에서 너비가 다른 두 개의 평판 (20mm$\times$200mm및 25mm$\times$200mm)을 이용, -90$^{\circ}$(평형 하향), -88$^{\circ}$, -86$^{\circ}$, -84$^{\circ}$, -60$^{\circ}$와 -40$^{\circ}$의 경사 가도에 대한 임계열유속이 측정되었다. 실험 결과 너비가 큰 평판에서, 그리고 수직 위치로부터의 각도가 클수록 임계열유속이 낮게 나타났다. 이는 가열면에서 발생된 기포들의 이탈이 어려워지기 때문인 것으로 판단된다. 경사가도에 따른 전체적 인 임계열유속 경향은 기존 연구들과 대체로 일치하나, 임계열유속 감소율이 변화하는 천이 각도가 -80$^{\circ}$ 근방에서 발견되었다.

• International journal of advanced smart convergence
• /
• 제9권4호
• /
• pp.26-33
• /
• 2020

This study measured the downward stepping movement relative to weight change (no load, and 10%, 20%, 30% of body weight respectively of adult male (n=10) from standardized stair (rise of 0.3 m, tread of 0.29 m, width of 1 m). The 3-dimensional cinematography and ground reaction force were also utilized for analysis of leg stiffness: Peak vertical force, change in stance phase leg length, Torque of whole body, kinematic variables. The strategy heightened the leg stiffness and standardized vertical ground reaction force relative to the added weights (p<.01). Torque showed rather larger rotational force in case of no load, but less in 10% of body weight (p<.05). Similarly angle of hip joint showed most extended in no-load, but most flexed in 10% of body weight (p<.05). Inclined angle of body trunk showed largest range in posterior direction in no-load, but in vertical line nearly relative to added weights (p<.001). Thus the result of the study proved that downward stepping strategy altered from height of 30 cm, regardless of added weight, did not affect velocity and length of lower leg. But added weight contributed to more vertical impulse force and increase of rigidity of whole body than forward rotational torque under condition of altered stepping strategy. In future study, the experimental on effect of weight change and alteration of downward stepping strategy using ankle joint may provide helpful information for development of enhanced program of prevention and rehabilitation on motor performance and injury.