목적: Doublet 반사경을 이용한 조준사격용 도트 사이트 장치의 개발. 방법: Sigma 2000 광학 설계 프로그램으로 Singlet 반사경과 Doublet 반사경을 설계하여 비교 검토하였다. 결과: 유한광선수차 분석에서 기존 Singlet 반사경을 사용한 도트 사이트 장치에 비해 시차(parallax)가 제거된 유효 시야가 3.3배 확대되는 성능을 보인다. Doublet 반사경을 사용하는 경우 광학계의 중심 두께가 기존 Singlet 반사경을 사용한 경우보다 2배 이상 두꺼워지기 때문에 목표점이 관측자의 망막에 결상할 때 Singlet 반사경의 경우와 같이 제1면과 제3면의 곡률반경을 동일하게 할 경우에는 배율 변화가 나타난다. 이를 극복하기 위해 Doublet 반사경인 경우에는 어포칼 조건을 만족하는 것이 필요하다. 결론: 기존의 Singlet 반사경의 방식보다 시차(parallax)가 제거된 유효 시야가 3.3배 확대되는 성능을 가지는 Doublet 반사경을 이용한 조준사격용 도트 사이트 장치를 개발하였다.
This paper investigates the free and forced longitudinal vibration of a double nanorod system using doublet mechanics theory. The doublet mechanics theory is a multiscale theory spanning between lattice dynamics and continuum mechanics. Equations of motion and boundary conditions for the double nanorod system are obtained using Hamilton's principle. Clamped-clamped and clamped-free boundary conditions are considered. Frequencies and dynamic displacements are determined to demonstrate the effects of length scale parameter of considered material and geometry of the nanorods. It is shown that frequencies obtained by the doublet mechanics theory are bounded from above (van Hove singularity) and unlike classical elasticity theory doublet mechanics theory predicts finite number of modes depending on the length of the nanotube. The present doublet mechanics results have been compared to molecular dynamics, experimental and nonlocal theory results and good agreement is observed between the present and other mentioned results. The difference between wave frequencies of graphite is less than 10% between doublet mechanics and experimental results near to the end of the first Brillouin zone.
등가렌즈 변환법을 2매 접합렌즈계의 설계에 적용하여 achromatic doublet 과 aplanatic doublet을 설계하였다. 먼저 얇은 렌즈계에서 3차수차를 보정하고, 이를 등가렌즈 변환법을 사용하여 두꺼운 렌즈계로 변환하였다. Crown 유리 BaK-2와 flint 유리 SF-2를 사용하여 Fraunhofer type 과 Steinheil type의 접합렌즈계를 설계하였고, 얇은 2매 접합렌즈계에서는 두 가지 설계형태 모두에서 2개의 achromatic solution과 하나의 aplanatic solution이 존재하였다.
In the present study, the axial vibration of the nanorods is investigated in the framework of the doublet mechanics theory. The equations of motion and boundary conditions of nanorods are derived by applying the Hamilton principle. A finite element method is developed to obtain the vibration frequencies of nanorods for different boundary conditions. A two-noded higher order rod finite element is used to solve the vibration problem. The natural frequencies of nanorods obtained with the present finite element analysis are validated by comparing the results of classical doublet mechanics and nonlocal strain gradient theories. The effects of rod length, mode number and boundary conditions on the axial vibration frequencies of nanorods are examined in detail. Mode shapes of the nanorods are presented for the different boundary conditions. It is shown that the doublet mechanics model can be used for the dynamic analysis of nanotubes, and the presented finite element formulation can be used for mechanical problems of rods with unavailable analytical solutions. These new results can also be used as references for the future studies.
Ship hulls obtained by the streamline tracing method usually have characteristically drooped keel lines at the bottom, and a flattening of these bottoms would contribute considerably in utilizing these analytically obtainable hull forms in practical usage. In this dissertation, the author deals with a study on the determination of a practical hull form by the streamline tracing method with a particular emphasis on the bottom flattening problem. Investigations are centered around the form and the terms of bottom doublet distribution. Several examples are computed by varying bottom doublet sheet systematically while the main side source distribution is kept the same. The following conclusions are obtained based on those computed results: after the strength of a bottom doublet sheet can be determined more easily and efficiently by employing the concept of a control plane. If the distance from the distributed plane of the bottom doublet sheet to the control plane is defined as the control distance, the strength of the bottom doublet sheet, the flatness of traced lines, and the increment of the beam length ratio by adding the bottom doublet sheet are all related to the control distance by linear equations near the design bottom. It is observed that a better result can be obtained by using a "line-sampling method" for ${\zeta}_K>2T/L$, and a "plane-sampling method" for ${\zeta}_K{\leq}2T/L$, provided that the check points are sampled in the range ${\xi}{\leq}0.7$.
A PLLIF (Planar Liquid Laser Induced Fluorescence) technique has been known to be a useful tool for the measurement of the spray patterns for various spray injectors because it can obtain two-dimensional images with high spatial resolutions without any intrusion on the spray field. In case of dense spray, however, the secondary emission as well as the extinction of an incident laser beam or a fluorescence signal can cause errors in quantifying a mass distribution. Unfortunately, a like-doublet injector which has a dense spray zone at the center may not be a good example or the application of the PLLIF technique. Therefore, we took PLLIF data for the like-doublet injector with a 12 bit color CCD camera by varying laser power, and then assessed their accuracy by comparing with the data obtained with a mechanical patternator and a PDPA (Phase Doppler Particle Analyzer). The experimental results showed that the gray level of fluorescence signal increases nonlinearly due to a secondary emission at the dense spray zone but this nonlinearity can be avoided by reducing the incident laser beam power. In addition, the mass flux distribution of the spray could be obtained by using the mass concentration data from PLLIF technique and the velocity profiles of liquid drops, and this distribution showed good agreement with that of mechanical pattemator. Therefore, it is possible that the PLLIF technique can be successfully applied to finding the mass distributions of like-doublet injectors.
목적: 본 연구는 빔분리프리즘을 가져서 길이가 축소된 도트사이트 장치의 개발에 관한 것이다. 방법: 빔분리프리즘을 사용하기 위해 doublet 반사경을 재설계하였으며, 시차 발생을 감소시키기 위하여 반사경의 광축 기울임을 없애도록 하여 길이가 축소된 새로운 도트사이트 장치를 개발하였다. 결과: 도트시표발생부와 빔분리프리즘과 doublet 반사경과 관찰자 눈의 광축이 T자 형태를 갖는 새로운 형태의 빔분리프리즘을 가지는 도트사이트 장치를 개발할 수 있었다. 결론: 본 연구에서 우리는 기존의 도트사이트 보다 사격의 정확도를 더욱 높일 수 있으며 광학적 전장길이를 축소 시킬 수 있는 새로운 형태의 빔분리프리즘을 채택한 도트사이트를 설계 개발하였다. 설계되어진 도트사이트는 기존의 도트사이트보다 수평방향의 사격의 정확도를 3배 이상 높일 수 있었으며 광학적 전장길이를 2.2.배 축소시킬 수 있게 되었다.
$Mg_2Ni_{1-x}{^{57}}Fe_x$(x=0.015, 0.03, 0.06, 0.12 and 0.24)합금을 제작하여 $M{\ddot{o}}ssbauer$ 공명에 의한 연구를 하였다. x=0.015, 0.03 합금의 $M{\ddot{o}}ssbauer$ spectrum은 2개의 doublet(doublet 1, 2)을, x=0.06 합금의 spectrum은 2개의 doublet(doublet 1, 2)과 1개의 six-line을, 그리고 x=0.12, 0.24 합금의 spectrum은 six-line만 보인다. x=0.015, 0,03, 0.06 합금의 doublet 1은, 초 상자성 거동을 보여주는 과잉으로 존재하는 일부의 철 때문에 생기는 것으로 판단된다. doublet 2는, $Mg_2Ni$ 상의 Ni에 치환된 철에 기인한 것으로 판단된다. doublet 2의 isomer shift 크기 (0,24 ~ 0.28 mm/s)로 보아 $Fe^{+3}$로 존재함을 추측할 수 있다. 또한 doublet 2의 quadrapole splitting이 영이 아님으로부터 Fe 주위의 전자 배열이 비대칭을 이루고 있음을 알 수 있고, 그 크기 (1.20 ~ 1.38 mm/s)는 산화수 +3의 quadrapole splitting 값에 아주 가까운 값이다. 자기적 초미세 상호 작용을 보여주는 six-line은 합금 속에 들어가지 않는 철 때문에 생긴다. 수소화물화 반웅시킨 x=0.015, 0.03 합금의 $M{\ddot{o}}ssbauer$ spectrum이 six-line을 보였는데, 이로부터 수소화물화 반응으로 인하여 Fe이 편석되었음을 알 수 있다. 수소화물화 반응후 $M{\ddot{o}}ssbauer$ spectrum, 자기장의 함수로서 자화의 변화 측정, Auger electron spectroscopy, electron diffraction pattern 분석 결과, Ni의 편석과 MgO의 형성을 보여주었는데, 이는 수소 속에 들어 있는 미량의 산소가 $Mg_2Ni$와 반응하여 야기된 현상으로 생각된다.
수중에서 방사된 음원의 신호는 해수면, 해저면 반사에 의한 다중경로 시간지연(multi-path time-delay)을 포함하여 체계(system)의 센서에 수신된다. 다중경로 환경과 복잡한 해양환경의 외란(disturbance)에 의해 수신된 신호간 상관성(coherence)이 저하된다. 따라서, 신호간 시간지연값을 이용하여 수중음원의 위치를 추정하는 체계는 추정성능의 저하가 나타난다. 이러한 환경에서도 강인한 음원 위치 추정성능을 위해 선배열(uniform line array), 평면배열(rectangular array)과 같은 다양한 형태의 센서배열과 빔형성(beamforming) 기법, 비용함수(cost-function)과 같은 신호처리를 이용하여 왔다. 본 연구에서는 선배열 형태의 doublet array와 추정된 시간지연값 보정 기법을 이용하고자 한다. 3 개의 doublet array를 동일 선에 위치하였으며 각각의 doublet array에 수신된 신호간의 시간지연값을 2 단계로 추정하였다. 수신신호에 대해 상호상관(cross-correlation) 함수를 적용하여 추정된 시간지연값을 수신신호의 중심주파수(center-frequency)와 array의 개구경(aperture) 및 수중음원과의 기하학적 관계에 따라 보정하여 최종의 시간 지연값을 얻었으며 이로부터 음원의 거리와 방위를 추정하였다. 제안한 기법의 타당성을 확인하기 위해, Monte-Carlo method를 이용하여 시뮬레이션하였다.
목적: 대물부의 구성이 더블렛+메니스커스 렌즈를 가지는 3X 스코프 개발에 관한 것이다. 방법: 더블렛(doublet) + 단일렌즈(singlet)의 구성을 가지는 대물부를 초기조건으로 하여 대물부의 유한광선 수차와 스코프 전체 광학계의 유한광선 수차를 최소화하도록 스코프 광학계를 최적화하여 새로운 형태의 3X 스코프를 개발하였다. 결과: 대물부의 구성을 더블렛+단일렌즈로 두고 유한광선 수차를 최소화하도록 스코프 광학계를 최적화를 하였을 때 우리는 단일렌즈는 더블렛 방향으로 오목한 메니스커스 형태의 렌즈가 되며, 더블렛과 메니스커스 렌즈 사이의 거리가 멀수록 유한광선 수차는 더욱 최소화됨을 확인할 수 있었다. 결론: 본 연구에서 우리는 3X 스코프의 대물부를 더블렛+메니스커스 렌즈 방식의 3매의 렌즈를 채택함으로서 기존의 스코프보다 유한광선 수차를 약 1/14로 줄일 수 있는 새로운 형태의 3X 스코프를 개발할 수 있었다. 이러한 수차량의 감소는 기존 스코프 보다 유효 구경을 크게 할 수 있으며 광학계의 길이를 짧게 할 수 있는 수단이 됨을 확인할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.