• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.279-283
• /
• 2012

본 논문에서는 모바일용 터치 스크린에서 손가락이 닿는 부분의 좌표를 계산하여 출력하는 저전력 고속 터치 제어 회로를 설계하고 구현하였다. 시스템 클럭은 10MHz이고, 채널 수는 21개, 대기 상태 전류는 $20{\mu}A$ 이고, 다이나믹 레인지는 140pF ~ 400pF 이며, 응답 시간은 0.1ms/frame이다. 저전력을 위한 전력 관리 회로와 보드, 습도, 온도에 따른 자동 임피이던스 보정 기능과 주변 키 및 패턴 간섭 억제 기능 및 직렬 인터페이스 I2C, SPI 기능을 구현하였다. 설계된 제어 회로의 성능은 FPGA와 $0.18{\mu}m$ CMOS 표준 공정을 이용하여 측정하였다. 구현된 제어회로는 모바일 폰이나 스마트 리모트 컨트롤로에 응용할 수 있도록, 다이아몬드 형태를 이용한 2 레이어 ITO용 모듈과 원가절감을 위한 단일 레이어 ITO 모듈에 사용 가능하도록 설계하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.605-606
• /
• 2012

• 전자공학회논문지B
• /
• 제32B권3호
• /
• pp.522-532
• /
• 1995

Multilayer neural networks with backpropagation learning algorithm are widely used for pattern classification problems. For many real applications, it is more important to reduce the misclassification rate than to increase the rate of successful classification. But multilayer perceptrons(MLP's) have drawbacks of slow learning speed and false convergence to local minima. In this paper, we propose a new method for character recognition problems with a single-layer network and double rejection mechanisms, which guarantees a very low misclassification rate. Comparing to the MLP's, it yields fast learning and requires a simple hardware architecture. We also introduce a new coding scheme to reduce the misclassification rate. We have prepared two databases: one with 135,000 digit patterns and the other with 117,000 letter patterns, and have applied the proposed method for printed character recognition, which shows that the method reduces the misclassification rate significantly without sacrificing the correct recognition rate.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.436-437
• /
• 2012

Double patterning technology (DPT) has been suggested as a promising candidates of the next generation lithography technology in FLASH and DRAM manufacturing in sub-40nm technology node. DPT enables to overcome the physical limitation of optical lithography, and it is expected to be continued as long as e-beam lithography takes place in manufacturing. Several different processes for DPT are currently available in practice, and they are litho-litho-etch (LLE), litho-etch-litho-etch (LELE), litho-freeze-litho-etch (LFLE), and self-aligned double patterning (SADP) [1]. The self-aligned approach is regarded as more suitable for mass production, but it requires precise control of sidewall space etch profile for the exact definition of hard mask layer. In this paper, we propose etch end point detection (EPD) in spacer etching to precisely control sidewall profile in SADP. Conventional etch EPD notify the end point after or on-set of a layer being etched is removed, but the EPD in spacer etch should land-off exactly after surface removal while the spacer is still remained. Precise control of real-time in-situ EPD may help to control the size of spacer to realize desired pattern geometry. To demonstrate the capability of spacer-etch EPD, we fabricated metal line structure on silicon dioxide layer and spacer deposition layer with silicon nitride. While blanket etch of the spacer layer takes place in inductively coupled plasma-reactive ion etching (ICP-RIE), in-situ monitoring of plasma chemistry is performed using optical emission spectroscopy (OES), and the acquired data is stored in a local computer. Through offline analysis of the acquired OES data with respect to etch gas and by-product chemistry, a representative EPD time traces signal is derived. We found that the SE-EPD is useful for precise control of spacer etching in DPT, and we are continuously developing real-time SE-EPD methodology employing cumulative sum (CUSUM) control chart [2].

• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.758-765
• /
• 1986

The design, fabrication and performance of vertical double diffused power MOSFET (VDMOS) were described. On the antimony (Sb) doped (~7x10**17 cm**-3) silicon substrate (N+), epitaxial layer(N-) was grown. The thickness and the resistivity of this layer were 32\ulcorner and about 12\ulcorner-cm, respectively. The P- channel length which was controlled by sequential P-/N+ double diffuison method was about 1~2 \ulcorner, and was processed with the self alignment of 21 \ulcorner width poly silicon. To improve the breakdown voltage with constant on-resistance (Ron) about 1\ulcorner, three P+ guard rings were laid out around main pattern. With chip size of 4800\ulcorner x4840 \ulcorner, the VDMOS has shown breakdown voltage of 410~440V, on-resistance within 1.0~1.2\ulcornerand the current capablity of more than 5A.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.36-41
• /
• 1998

유기화합물인 alkyl sulfonate를 층상이중수산화물에 삽입시킨 화합물을 합성하였다. X-선 회절 데이터와 alkyl sulfonate의 분자의 크기를 비교하여 층간 삽입된 alkyl sulfonate의 공간배열을 확입하였다. 층간 삽입된 alkyl sulfonate의 분자 사슬이 이중수산화물의 층에 수직되며 서로 반대 방향으로 배열되어 있음을 확인하였다.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.440-451
• /
• 1998

An experimental study has been conducted to investigate solidification of NH$_{4}$CI-H$_{2}$0 mixtures inside a vertical rectangular enclosure. Solidification process is visualized by the shadowgraph method. Emphasis is placed on the effect of solidification parameters such as the aspect ratio, cooling wall temperature and initial composition. The aspect ratio shows a dominant effect on the number and developing time of the double diffusive layers which reveals the relative strength of solutal convection to thermal convection. Similar flow pattern is observed when the concentration difference between interdendritic liquid and the pure liquid which drives solutal convection is the same regardless of the different cooling wall temperature and initial concentration.

• 센서학회지
• /
• 제30권5호
• /
• pp.273-278
• /
• 2021

Here, we studied the change in the mechanical stiffness of a diaphragm according to the corrugation pattern. The diaphragm consists of a silicon oxide and nitride double layer; a corrugation pattern was formed by dry etching, and the diaphragm was released by wet etching. The fabrication of the thin film was verified using focused ion beam and scanning electron microscopy images. The mechanical stiffness of the diaphragm was obtained by measuring the surface vibration using a laser Doppler vibrometer while applying external sound pressure. Flat squares, diaphragms with square corrugations, and circular corrugation patterns were measured and compared. The stiffness of the diaphragm with a corrugation structure was found to be smaller than that without a corrugation structure; in particular, circular corrugation showed a better effect because of the high symmetry. Furthermore, the effect of corrugation was theoretically predicted. The proposed corrugated diaphragm showed comparable flexibility with the state-of-the-art MEMS microphone diaphragm.

• 대한기계학회논문집
• /
• 제13권6호
• /
• pp.1321-1329
• /
• 1989

본 논문에서는 성층화된 용액ㅇ네 수평방향으로 온도구배가 가해지는 경우에 있어서 두 부력인자의 상대적 크기에 따라 나타나는 유동형태와 그에 따른 온도, 농도 분포 및 열전달특성을 수치적으로 연구하고자 한다.

• Structural Monitoring and Maintenance
• /
• 제9권1호
• /
• pp.29-42
• /
• 2022

In mountainous areas of China, concrete poles with connectors are widely employed in power transmission due to its convenience of manufacture and transportation. The bearing capacity of the poles must have degenerated over time, and most of the steel connectors have been corroded. Carbon fiber reinforced polymer (CFRP) offers a durable, light-weight alternative in strengthening those poles that have served for many years. In this paper, the bearing capacity and failure mechanism of CFRP sheet strengthened existing reinforced concrete poles with corrosion steel connectors were investigated. Four poles were selected to conduct flexural capacity test. Two poles were strengthened by single-layer longitudinal CFRP sheet, one pole was strengthened by double-layer longitudinal CFRP sheets and the last specimen was not strengthened. Results indicate that the failure is mainly bond failure between concrete and the external CFRP sheet, and the specimens fail in a brittle pattern. The cross-sectional strains of specimens approximately follow the plane section assumption in the early stage of loading, but the strain in the tensile zone no longer conforms to this assumption when the load approaches the failure load. Also, bearing capacity and stiffness of the strengthened specimens are much larger than those without CFRP sheet. The bearing capacity, initial stiffness and elastic-plastic stiffness of specimen strengthened by double-layer CFRP are larger than those strengthened by single-layer CFRP. Weighting the cost-effective effect, it is more economical and reasonable to strengthen with single-layer CFRP sheet. The results can provide a reference to the same type of poles for strengthening design.