• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.47-52
• /
• 2000

F.R.P specimens were made by mixture CM(chopped mat) 450-104 matrix & RC(roving clothes)570-100 Roving, the mixture ratio Resin: hardener (92:8) for tensile test. It was also made of plates by hand lay-up method and was been cured for 24 hours and then was cut tensile specimens in accordance with ASTM D638 Type 3. Knowing exact behavior of bonded area's stress and strain when the tensile test was going on, the test specimens were made of 2 plies laminae of F.R.P in each for supporting cut part in middle of specimen length. And in middle part also were covered of F.R.P plies of 1/2, 2/3 length of specimen in each as well. Also we consider shear stress in adhered area. This study reveals that as plys length is more longer, rupture stress grows remarkably larger.

• 비파괴검사학회지
• /
• 제19권6호
• /
• pp.439-447
• /
• 1999

복합재료-금속 접착접합부가 사용 중 반복하중을 받을 때 발생하는 피로손상을 실시간에 평가할 수 있는 기법으로 음향초음파(acousto-ultrasonics; AU)법을 채택하였으며, 피로시험 중의 단일겹치기(single-lap) 및 이중겹치기 (double-lap) 평판형 시험편에서 취득한 신호로부터 계산된 음향초음파변수(acousto-ultrasonic parameters: AUP)와 피로손상도 사이의 상관관계를 나타내는 곡선을 얻을 수 있었다. 곡선은 피로손상에 의한 고분자기지 복합재료의 강성율 저하($E/E_o$)를 나타내는 곡선과 매우 유사하며, 이를 바탕으로 피로손상도의 실시간 예측이 가능하다. 다만 단일겹치기 시험편의 경우에는 Amplitude와 AUP2를, 이중겹치기 시험편의 경우에는 Amplitude와 AUP1을 기준 변수로 채택할 때 보다 일관성 있는 결과를 얻고 있는 점으로부터 실제 구조물에 적용함에 있어서는 각각의 형상에 따른 최적변수를 선택하여 활용해야 할 것으로 사료된다.

• International Journal of Korean Welding Society
• /
• 제4권1호
• /
• pp.53-60
• /
• 2004

Adhesive-bonded joints are widely used in the industry. Recently, applications of adhesive bonding joints have been increased extensively in automobile and aircraft industry. The strength of adhesive joints is influenced by the surface roughness, adhesive shape, stress distribution, and etc. However, the magnitude of the influence has not yet been clarified because of the complexity of the phenomena. In this study, as the fundamental research of adhesive bonding joints, the effects of adhesive shape and loading speed on bonding strength properties and durability of aluminum to polycarbonate single-lap joints were studied. To evaluate the effect of adhesive shape, several modified shapes were used, and loading speeds were varied from 0.05 to 5mm/min. As a result, the load distribution showed a brittle fracture tendency. The trigonal edged single lap and bevelled lap joints showed the higher strength than the plain single lap, trigonal single lap, joggle lap and double lap joints in same adhesive area. The fractures of trigonal single lap and trigonal edged single lap joints that had the higher strength level were shown as the mixture type of the cohesive and interfacial-failure, mostly joggle lap joints that had the lower strength level were shown as the adhesive-failure.

• 한국항공우주학회지
• /
• 제34권3호
• /
• pp.44-50
• /
• 2006

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.783-790
• /
• 2004

Adhesive-bonded joints are widely used in the industry. Recently, applications of adhesive bonding joints have been increased extensively in automobile and aircraft industry. The strength of adhesive joints is influenced by the surface roughness, adhesive shape, stress distribution, and etc. However, the magnitude of the influence has not yet been clarified because of the complexity of the phenomena. In this study, as the fundamental research of adhesive bonding joints, the effects of adhesive shape and loading speed on bonding strength properties and durability of aluminum to polycarbonate single-lap joints were studied. To evaluate the effect of adhesive shape, several modified shapes were used, and loading speeds were varied from 0.05 to 5 mm/min. As a result, the load-displacement distribution was shown a brittle fracture tendency. The trigonal edged single lap and bevelled lap joints showed the higher strength than the plain single lap, trigonal single lap, joggle lap and double lap joints in same adhesive area. The fractures of trigonal single lap and trigonal edged single lap joints that had the higher strength level were shown as the mixture type of the cohesive and interfacial-failure, mostly joggle lap joints that had the lower strength level were shown as the adhesive-failure.

• 비파괴검사학회지
• /
• 제15권2호
• /
• pp.357-363
• /
• 1995

CFRP 복합 재료를 접착 접합한 single-lap 및 double-lap 접합 시험편의 disbond 크기를 초음파 C-scan 및 simulated stress wave를 이용하여 정량적으로 평가하고자 하였다. 초음파 C-scan 시험을 통해 인공 결함의 크기가 확인된 시험편을 사용하여, 접합부를 통과한 응력파의 주파수를 변화시키면서 peak amplitude를 측정하여 주파수 응답성을 구하였으며, 이를 분석한 결과 두 적층판의 두께 방향 기본 공진 및 3차 공진 주파수에서 peak amplitude가 극값을 보이며, 접합 면적에 비례함을 관측할 수 있었다. 이 결과로 표준시험편만 준비된다면 결함의 정량적 평가 및 현장 적용에도 이용할 수 있을 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.923-930
• /
• 2003

We jointed Bi(Pb)-Sr-Ca-Cu-O multifilament tapes and evaluated their electrical and mechanical properties. In order to improve connectivity of multifilaments, one or two single-filament tape was inserted between two multifilament tapes. The critical current ratio(CCR) and n-value of the jointed tapes were evaluated as a function of uniaxial pressure. It was observed that critical current ratio and n-value were 24.8-29.0% and 2.5-2.8 for MM lap-jointed tape. On the other hand, the corresponding values were improved to 24.7-53.9% and 3.1-4.2 for MSM jointed tape, and 63.4-76.0% and 3.4-5.1 for double MS:vr lap-jointed tape, respectively. The highest electrical properties of double MSM lap-jointed tape are considered to be owing to the presence of single core, causing better interconnections of multifilaments between the two tapes. The mechanical property of jointed tape was evaluated and correlated to the microstructural evolution. The strength of jointed tapes was 44-64% less than that of the unjoined tape. The strain tolerance of jointed tape was also reduced compared to that of the unjoined tape. These lower mechanical properties of jointed tape are probably due to the induced nonuniform microstructure such as the existence of cracks and Ag-intrusion in the joined region.

• Journal of the Korean Wood Science and Technology
• /
• 제46권1호
• /
• pp.85-92
• /
• 2018

소경각재를 이용한 소경각재 적층목을 기둥-보 목조건축 구조재로 이용하기 위해선 장대재 제작이 가능하여야 한다. 본 연구에서는 낙엽송 소경각재의 종접합 성능평가를 실시하였다. 시험편들은 종접합 방법에 따라 6가지 형상으로 제작하였으며 인장 및 휨 강도시험으로 종접합성능을 검토하였다. 종접합 접합부의 인장시험에서 Lap 시험편의 인장강도는 Double Lap 시험편보다 양호하였으며, Scarf 시험편의 인장강도는 Hooked scarf 시험편보다 양호하였다. Rod 시험편의 인장강도는 3.6 MPa로 가장 양호하였다. 종접합 접합부의 휨 시험결과 봉형 GFRP를 삽입 접착한 시험편들은 평균 29 MPa의 휨 파괴계수가 측정되었으며, 타 접합부 시험편들은 11 MPa 이하의 휨 파괴계수 값이 관찰되었다. 봉형 GFRP (Glass Fiber Reinforced Plastic)를 삽입 접착한 시험편들은 인성파괴가 관찰되었고 나머지 시험편들은 취성파괴가 발생하였다. Rod + Lap 시험편의 평균 휨 파괴계수가 30.5 MPa로 종접합한 시험편 중 가장 양호한 성능을 발휘하였다. Rod + Lap 시험편의 휨 강도는 종접합하지 않은 대조군 시험편 휨 파괴계수의 66%에 해당되었다. 낙엽송 소경각재 종접합 방법으로 봉형 GFRP 삽입 접착이 가장 유효한 강도를 나타내는 것을 확인하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.78-82
• /
• 2004

The co-cured joint has been widely used in joining process of composite structures due to its simple and easy manufacturing process. In this paper, the effect of stacking sequence of the carbon epoxy prepreg, bonding length and thickness of the aluminum plate on the static tensile load capability of the co-cured aluminum-composite double lap joint were experimentally investigated. From experimental results, the optimum EA ratios with respect to stacking sequence and bonding length of the co-cured joint were obtained, which may be useful for the joining of hybrid structures.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.57-60
• /
• 2005

Composite-to-aluminum joins were tested to get failure loads and modes for three types of joins; adhesive bonding, bolt fastening, and adhesive-bolt hybrid joining. Film type adhesive FM73 and paste type adhesive Cytec EA9394S were used for aluminum and composite bonding to make a double-lap joint. A digital microscope camcorder was used to monitor the failure initiation and propagation. It was found that the hybrid joining is an effective method to strengthen the joint when the mechanical fastening is stronger than the bonding as in the case of using the paste type adhesive. On the contrary, when the strength of the bolted joint is lower than the strength of the bonded joint as in the joint with the film type adhesive, the bolt joining contribute little to the hybrid joint strength.