대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제28권6호
  • /
  • Pages.783-790
  • /
  • 2004
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

에폭시 접착제 접합구조물의 강도향상을 위한 접착부 형상설계

Shape Design of Adhesive Joints for Strength Improvement of Epoxy Adhesive Structures

  • 서도원 (전북대학교 공과대학 기계설계학과) ;
  • 김효진 (전북대학교 공과대학 기계설계학) ;
  • 임재규 (전북대학교 기계항공시스템공학부, 공학연구원 공학기술연구센터)
  • 발행 : 2004.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Adhesive-bonded joints are widely used in the industry. Recently, applications of adhesive bonding joints have been increased extensively in automobile and aircraft industry. The strength of adhesive joints is influenced by the surface roughness, adhesive shape, stress distribution, and etc. However, the magnitude of the influence has not yet been clarified because of the complexity of the phenomena. In this study, as the fundamental research of adhesive bonding joints, the effects of adhesive shape and loading speed on bonding strength properties and durability of aluminum to polycarbonate single-lap joints were studied. To evaluate the effect of adhesive shape, several modified shapes were used, and loading speeds were varied from 0.05 to 5 mm/min. As a result, the load-displacement distribution was shown a brittle fracture tendency. The trigonal edged single lap and bevelled lap joints showed the higher strength than the plain single lap, trigonal single lap, joggle lap and double lap joints in same adhesive area. The fractures of trigonal single lap and trigonal edged single lap joints that had the higher strength level were shown as the mixture type of the cohesive and interfacial-failure, mostly joggle lap joints that had the lower strength level were shown as the adhesive-failure.

키워드

참고문헌

  1. Pirondi, A. and Nicoletto, G., 2002, 'Mixed Mode I/II Fracture Toughness of Bonded Joints,' Int. J. Adhes. Adhes., Vol. 22, pp. 109-117 https://doi.org/10.1016/S0143-7496(01)00042-2
  2. Higgins, A., 2000, 'Adhesive Bonding of Aircraft Structures,' Int. J. Adhes. Adhes., Vol. 20, pp. 367-376 https://doi.org/10.1016/S0143-7496(00)00006-3
  3. Lunder, O., Olsen, B. and Nisancioglu, K., 2002, 'Pre-treatment of AA6060 Aluminum Alloy for Adhesive Bonding,' Int. J. Adhes. Adhes., Vol. 22, pp. 143-150 https://doi.org/10.1016/S0143-7496(01)00049-5
  4. Roy., A., Mabru, C. and Gacougnolle, J. L., 1997, 'Damage Mechanisms in Composite/Composite Bonded Joints under Static Tensile Loading,' Appl. Compos. Mater., Vol. 4, pp. 95-119 https://doi.org/10.1007/BF02481383
  5. Tong, L., Sheppard, A. and Kelly, D., 1995, 'Relationship between Surface Displacement and Adhesive Peel Stress in Bonded Double Lap Joints,' Int. J. Adhes. Adhes., Vol. 15, pp. 43-48 https://doi.org/10.1016/0143-7496(95)93642-X
  6. Messler, R. W., 1993, Joining of Advanced Materials, Butterworth-Heinemann, Stoneham, MA, pp. 108-180
  7. Srivastava, V. K., 2003, 'Characterization of Adhesive Bonded Lap Joint of C/C-SiC Composite and Ti-6Al-4V Alloy under Varying Condition,' Int. J. Adhes. Adhes., Vol. 23, pp.59-67 https://doi.org/10.1016/S0143-7496(02)00082-9
  8. Bistac, S., 1998, 'Durability of Steel/polymer Adhesion in an Aqueous Environment,' Int. J. Adhes. Adhes., Vol. 18, pp. 365-369 https://doi.org/10.1016/S0143-7496(98)00020-7
  9. Wylde, J. W., 1998, 'Measurement of Adhesive Joint Fracture Properties as a Function of Environmental Degradation,' Int. J. Adhes. Adhes., Vol. 18, pp. 237-246 https://doi.org/10.1016/S0143-7496(98)00028-1
  10. Belingardi, G., Goglio, L. and Tarditi, A., 2002, 'Investingating the Effect of Spew and Camfer Size on the Stresses in Metal/Plastics Adhesive Joints,' Int. J. Adhes. Adhes., Vol. 22, pp. 273-282 https://doi.org/10.1016/S0143-7496(02)00004-0
  11. Seo, D. W., Yoon, H. C., Yoo, S. C., Lim, J. K. and Dorn, L., 2003, 'Effect of Surface Treatment on Adhesive Strength Properties of Al/PC Adhesive Joints, Transactions of the KSME, A, Vol. 27, No. 5, pp. 840-847 https://doi.org/10.3795/KSME-A.2003.27.5.840
  12. ASTM standard D3163-96, 1998, Annual Book of ASTM Standards, Vol. 15.06, ASTM, West Conshohocken, PA, pp. 193-195
  13. Seo, D. W. and Lim, J. K., 2002, 'Effect of Strain Rate and Temperature on fracture strength of Ceramic/Metal Joint Brazing with Ti-Ag-Cu Alloy,' KSME International Journal, Vol. 16, No. 9, pp. 1078-1083 https://doi.org/10.1007/BF02984427