• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.117-120
• /
• 2003

Electro-micromechanical techniques were applied using four-probe method for carbon nanotube (CNT) or nanofiber (CNF)/epoxy composites with their content. Carbon black (CB) was used to compare with CNT and CNF. The fracture of carbon fiber was detected by nondestructive acoustic emission (AE) relating to electrical resistivity for double-matrix composites test. Sensing for fiber tension was performed by electro-pullout test under uniform cyclic strain. The sensitivity for fiber damage such as fiber fracture and fiber tension was the highest for CNT/epoxy composites, and in CB case they were the lowest compared with CNT and CNF. Reinforcing effect of CNT obtained from apparent modulus measurement was the highest in the same content. The results obtained from sensing fiber damage were correlated with the morphological observation of nano-scale structure using FE-SEM. The information on fiber damage and matrix deformation and reinforcing effect of carbon nanocomposites could be obtained from electrical resistivity measurement as a new concept of nondestructive evaluation.

• 대한조선학회논문집
• /
• 제57권6호
• /
• pp.373-380
• /
• 2020

We have developed the hybrid prototype load cell structures. These developed load cell structures may increase the reliability of the load sensing by deriving the load values through the double sensing method through the vertical maximum deflection and bending stress of the simple beams. For this purpose, the structure design was performed so that the load value, the deflection and stress value could be output to the same value through the optimal structure design. The structurally designed dimensions reaffirmed the accuracy of the design through the structural analysis program and the matching of the load value and the deflection value. Based on the designed structural dimension, the prototype form was constructed through laser cutting and production using hot rolled steel materials. The developed prototype load cell structure can be used as good educational material in various subjects such as material mechanics, steel structure design, measurement engineering, and mechatronics engineering. It is also believed that the measurement system ideas can inform the occurrence of errors in the event of a problem, and if a major accident caused by a sensing error is predicted, it will show good utilization to prevent accidents.

• Journal of Magnetics
• /
• 제21권3호
• /
• pp.356-363
• /
• 2016

To improve the sensing accuracy of the newly developed magnetically suspended sensitive gyroscope (MSSG), it is necessary to analyze the causes of drift error. This paper build the models of disturbing torques generated by stator assembly errors based on the geometric construction of the MSSG with double spherical envelope surfaces, and further reveals the generation mechanism of the drift error. Then the drift error from a single stator magnetic pole is calculated quantitatively with the established model, and the key factors producing the drift error are further discussed. It is proposed that the main approaches in reducing the drift error are guaranteeing the rotor envelope surface to be an ideal spherical and improving the controlling precision of rotor displacement. The common problems associated in a gyroscope with a spherical rotor can be effectively resolved by the proposed method.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2000년도 추계학술대회 논문집(Proceeding of the KOSME 2000 Autumn Annual Meeting)
• /
• pp.143-151
• /
• 2000

Dissolved silica is make some critical trouble at steam turbine. And, we must measure it to ppb level. We were looking for the best measuring method of the silica. Via this study, we could found it in the N-IR spectroscopy technology. This dissertation have been discuss about system structure, system fundamentals and performance test. At the test, we were study in the spectral interference of $NH_3$. We know that existing system had some problem. It is structural frailties of single beam type. Therefore we were study for double beam type structure. And we obtain a good result. In the result, it have been discuss that conduct a test of $NH_3$ effect.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.173-176
• /
• 2008

In this study, a new kind of instrument for measuring the magnetic shielding effectiveness (MSE) was developed using a double yoke; one a magnetizing yoke and the other a sensing yoke. Using the developed instrument, the MSE could be measured for a steel sheet specimen in the ELF range, where the magnetic permeability contributes to the MSE at low frequencies and eddy currents contributes to the MSE high frequencies with < 0.1 dB reproducibility. The developed measuring method can be applied to quality control in a steel sheet company producing EMI/EMC shielding materials.

• 전기학회논문지P
• /
• 제56권4호
• /
• pp.173-178
• /
• 2007

As development of industry is accelerated, most electricity load system requires power supply that could be high precision and effective control. Among supply and control unit of suitable power supply in these load characteristic, inverter systems of constant current regulate is used widely control of lighting & beaconing of aerodromes and electric heating system. Therefore, in this paper proposed a inverter systems of constant current regulate that using improved measurement and switching techniques. Proposed measure techniques that used moving average method of instantaneous r.m.s. for measuring current sensing improved response and precision. Also, in this paper proposed improved high effectiveness switching techniques that get high efficiency of inverter by the double-carrier modulation. Results of an experiment proved effect of proposed system.

• 한국콘텐츠학회논문지
• /
• 제5권6호
• /
• pp.248-254
• /
• 2005

최근 중앙선과 태백선의 국철구간에 대한 복선화 사업이 시작되면서 도심지에 비해 지형이 험준하고 경사가 급한 산악지에서의 철도설계와 공사의 어려움이 예상되고 있다. 본 연구에서는 지형이 험준한 산악지에서의 복선철도 신설구간에 대한3차원 지형분석과 가상주행을 통하여 설계 및 시공 이전에 대상지역의 인공위성 영상의 활용을 구체적으로 적용함으로서 좀 더 상세한 지형에 대한 정보수집과 분석 을 시도하였다. 약 15km 구간의 산악지에 대한 3차원 지형분석과 복선철도노선과의 관계를 확인하고 가상주행을 실제 적용해 봄으로서 기존의 방법을 개선할 뿐만 아니라 산악지의 복선철도 구간의 지형분석의 방법을 제시하여 새로운 방법의 가능성을 찾아낼 수 있었다.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.64-72
• /
• 1996

This paper is aimed to develop an optical method for measuring 3-dimensional shapes of specular objects having curved surfaces. The existing methods measuring the shapes of specular objects have several common disadvantages: they may not work properly if the surface is highly specular like mirror surface or if the reflectance property is not uniform over the surface. And, they often require the a priori knowledege about the surface reflectance. To overcome these disadvantages, the measurement using double pass retroreflection method is proposed in this paper. For this measurement principle, an experimental measuring system is designed and prepared which is composed of a galvanometer scanner, a beam splitter, a laser source, a CCD camera, and a reflector made of retroreflective material. To verify the effectiveness of the measurement system a series of experiments are performaed for various specular objects. The results observed from the experiments show that the developed optical sensing system can be an effective mean of measuring the 3-D shapes of specular objects.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1411-1414
• /
• 1997

It is essential to obtain a distane informaion in order to completely execute assembly tasks such as a grasping and an insertion. In this paper, we propose a method estimating a measurement distance from a sensor to an object through using the omni-directional image sensing system for assembly(OISSA) and show its features and feasibility by a computer simulation. The method, utilizing a forwarded motion stereo technique, is simple to search the corresponding points and possible to immediatiely obtain a three-dimensional 2.pi.-shape information.

• 대한원격탐사학회지
• /
• 제33권2호
• /
• pp.159-169
• /
• 2017

위성용 전자광학탑재체는 제한된 소모전력 및 우주방사선과 같은 사용 환경에 의해 설계부터 특별한 요구사항을 가지고 있으며, 획득 영상의 품질은 주로 GSD (Ground Sampled Distance), 신호대잡음비(SNR, Signal to Noise Ratio), MTF (Modulation Transfer Function)에 따라 좌우된다. 영상센서의 출력신호에 포함된 잡음 감소를 통한 신호대잡음비 개선을 위하여, 센서에 추가된 프리픽셀(Pre-pixel) 및 다크픽셀(Dark-pixel)을 사용하여 CDS (Corrective Double Sampling) 방식을 통해 영상센서의 잡음 성분을 포함한 오프셋 신호(Offset Signal)를 제거하는 아날로그 신호처리(ASP, Analog Signal Processor) 방법을 제안한다. 또한 센서 제어시스템에서는 영상의 불균일성 처리를 위해 제어시스템의 출력 포트별 게인(Gain), 오프셋, 및 센서의 화소별 특성을 반영한 다양한 방식에 의한 보정 방법이 적용된다. 본 논문에서는 이상 설명한 여러 가지 잡음 개선방법을 시스템 설계 및 운영에 적용하여 위성탑재용 전자광학카메라의 신호대잡음비 향상 방법을 제안하고, 실험을 통해 검증한다.