• 소성∙가공
• /
• 제16권8호
• /
• pp.567-574
• /
• 2007

Double layered tube is assembled with an inner tube and an outer tube, similar in material or not, contacting closely and deforming simultaneously when subjected to external force. For the manufacturing of double layered tube, the hydroforming assembly technology has several advantages. Therefore in this study, hydroforming characteristics of double layered tube was investigated. The free bulge test was performed to produce formability diagrams of double layered tubes at various forming pressure and feeding amounts. The hexagonal shape hydroforming test was also performed to estimate the dimensional accuracies of double layered tube through the corner filling ratio and the gap between inner and outer tube. Besides experimental analyses, the analytical model that can predict internal pressure for the hydroforming of double-layered tube was proposed and experimentally validated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.306-309
• /
• 2007

In this study, hydroforming characteristic of the double-layered tube was investigated in the hydroforming process. The double-layered tube can be made outer surface on the stainless steel by only one processing. The free bulging test was performed to analysis optimized pressure and axial feeding amount of the double layered tubes. And the experimental results between stainless/carbon and carbon/carbon double-layered tube were compared with the forming data. Moreover analysis model that can be hydroformability and predictable forming pressure of double-layered tube was presented.

• 소성∙가공
• /
• 제19권7호
• /
• pp.405-410
• /
• 2010

Double layered tube that has been used for transportation and oil piping system is occasionally exposed to elevated temperature. The change in stress state at elevated temperature is important for the safe design of double layered tube. In this study, the variation of stress state for hydroformed double layered tube of which inner tube is stainless steel and outer tube is mild steel has been analytically analyzed. To characterize the thermal stress at elevated temperature, analytical model to provide thermal stresses between outer tube and inner tube was developed by using theories of elasticity and Lame equation. The feasibility of analytical model is verified by finite element analysis using ANSYS $CLASSIC^{TM}$, commercially available code. The variation of thermal stress at various thickness combination of inner and outer tube has also been investigated by proposed analytical model.

• 소성∙가공
• /
• 제31권3호
• /
• pp.143-150
• /
• 2022

The purpose of this study was to investigate an innovative hydroforming process for the cost-effective manufacturing of double layered tube with circumferentially corrugated patterns. Conventional double pipe heat exchanger has relatively poor heat transfer efficiency because of the limited contact area resulting from the concentrically arranged simple cylindrical structure. As a promising alternative to enhance heat transfer efficiency, double layered tube with corrugated internal pattern was considered in this study. To fabricate corrugated inner tube, innovative tube hydroforming system was developed. The customized loading paths were established using the simulated forming pressure and contracting stroke at various bar diameters. Experimentally obtained cross-sectional profiles were analyzed to evaluate the reliability and applicability of the hydroformed tube with various patterns. The results demonstrate that the proposed hydroforming process can be a feasible alternative for manufacturing high-performance double-tube heat exchangers.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.331-339
• /
• 2016

To improve the acoustic performance of sound absorbing materials, the thickness of the material should be increased or the sound absorbing material having an irregular surface shape should be used. In this study, the acoustic characteristics and methods to improve the acoustic performance of a sound absorbing system equipped with double layered polyester sound absorbing materials were investigated. The numerical model was set up and the results obtained from the model were compared with the actual measurement data. And, strategies to improve the acoustic performance of sound absorbing systems with double layered sound absorbing materials made of polyester with different configuration were shown. So, this study is expected to be usefully used at sites that require high acoustic absorption performance with minimal installation thickness to reduce sounds reflection in narrow spaces such as interior of subway tunnels or in noise barriers installed adjacent to rails.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 추계학술대회
• /
• pp.110-113
• /
• 1993

An in vitro experiment under laminar non-pulsatile blood flow and an acute canine ex vivo femoral A-V series shunt experiment were undertaken to investigate the effectiveness of saline perfusion through pores of porous tubes to prevent formation of mural thrombus. PS/SBR porous tubes were used for the in vitro experiment. Commercially obtained ePTFE porous tubes were etched by sodium naphthalenide, and the etched tubes were used for the ex vivo experiment. According to the results of the in vitro experiment, mural thrombus on the surface of the porous tribe could be prevented by the saline perfusion. Adhered blood cells decreased semi-logarithmically with increased perfusion rate (up to $0.022\;ml/min-cm^2$) of isotonic saline solution. According to results of the ex vivo experiment, mural thrombus decreased with increased perfusion rate (upto $0.060\;ml/min-cm^2$).

• 한국음향학회지
• /
• 제39권4호
• /
• pp.270-278
• /
• 2020

본 논문은 원통형 임피던스 튜브내에 설치된 다중 미세천공판(Micro-Perforated Plate, MPP)의 음향투과를 해석적으로 구하는 방법을 다루었다. 판의 진동을 무한 급수의 합으로 전개하였는데 반경방향으로는 Bessel 함수를 포함한다. 평면파 가정하에서 저주파수 대역의 근사식을 유도하였으며 전달함수법을 이용하여 다중 MPP에 대한 음향투과율 공식을 제시하였다. 단일과 이중 MPP의 음향투과손실(Sound Transmission Loss, STL)을 본 논문에서 제안한 공식을 이용하여 계산하였으며 유한요소법(Finite Element Method, FEM)을 사용한 결과와 잘 일치 하였다. 천공율이 증가할수록 STL은 감소하는데 이는 판의 진동보다는 천공율이 더 큰 영향을 주기 때문이다. STL은 판의 공진주파수에서 골(dip)을 보이며 이중 MPP의 STL은 질량-스프링-질량 진동에 해당하는 공진주파수에서 골을 보인다. 본 연구에서 제안한 STL 예측 모델은 임의의 개수의 다중 MPP에 적용이 가능하며 각각의 판은 미세천공을 포함하거나 포함하지 않는 두 가지 경우가 모두 가능하다.

• 에너지공학
• /
• 제13권2호
• /
• pp.93-100
• /
• 2004

간접법을 이용한 표면오염도 측정 시 시료채취와 동시에 방사선 검출이 가능한 스메어 매체를 제조하고 성능을 평가하였다. 스메어 매체는 무기섬광체를 고분자 막에 함침시킨 것으로서, 용매로는 디메틸포름아마이드(DMF)와 메틸렌클로라이드(MC) 그리고 고분자 소재로서 폴리설폰(PSF)을 사용하였고, 무기섬광체는 CAYS(cerium activated yttrium silicate)를 사용하였다. 함침막은 단일 및 이중구조로 제조하였고, 물. 메타놀 등 비용매성 욕조에 침지하거나 용매 증발을 통하여 고형화하여 특성을 비교하였다. 방사선과의 상호작용에 의하여 무기섬광물질 함침막으로부터 방출되는 광자의 계측은 광전증배관과 고전압원, 증폭기. 계수기로 구성된 원형계수기를 사용하였다. $^{14}$ C표면오염에 대해 무기섬광 함침막을 이용해 얻은 계수율을 통상의 저준위 알파/베타 계수기로 얻은 결과와 비교할 때 상대 감도가 약 50%로 나타났다. 또한, 계수효율이 상대적으로 낮았지만 저에너지 베타선 방출핵종인 $^3$H표면오염도측정이 가능하다는 것을 확인하였다.