• Journal of Welding and Joining
• /
• 제33권5호
• /
• pp.35-40
• /
• 2015

Characterization of microstructures and mechanical properties of 83mm thickness EH36-TM welds produced by the combined flux cored arc (FCA) and electro gas (EG) welding processes has been studied with the two different groove conditions, single-V (SV) and double-V (DV) bevels. The welding consumables used for FCA and EG welding processes were ASME/AWS A5.29 (E81T1-K2) and A5.26 (EG72T), respectively. Experimental results showed that all the mechanical properties of welds such as tensile property, CVN toughness and Vickers hardness met IACS requirements. The tensile strength of EG welded plates were reduced by approximately 4% (DV: 3.8%, SV: 4.2%) compared to the base metal. The hardness value of SV-beveled weld metal was slightly lower than that of DV-beveled one. There were no significant differences as per welding groove conditions except for the weld metal. In addition, at the fusion line, the toughness of SV condition was 20J lower and the weld metal was 40J lower than DV condition, respectively. On the basis of microstructural analysis, grain boundary ferrite (GBF) structures for SV condition were 2 times higher volume fraction than for DV condition and their packet sizes were coarsened to almost double. It was thus suggested that the GBF volume fractions and packet sizes in the weld metal of EH36-TM steel plates are the most important factors affecting the mechanical properties of the combined FCA and EG welded joint. Nevertheless, all the results of welds with both DV and SV conditions were found to be excellent.

• Elastomers and Composites
• /
• 제34권3호
• /
• pp.229-238
• /
• 1999

본 연구에서는 제3의 성분으로 벤젠 술폰산계열 반응성 화합물과 ENB 및 DCPD를 사용하여 비diene계 고분자인 EVA를 특수 화학적 처리에 의하여 EVA의 주쇄에 불포화기 즉, 이중결합을 도입시켰다. 또한 이중결합도입 EVA와 diene계 범용합성고무인 CR, SBR과의 블렌드를 통하여 황가 황체를 제조하여 가황체들의 물리적 특성을 비교 검토하였다. 검토결과 원래의 EVA가 갖고 있는 green strength, 사출 압출 성형성, 접착성, 점착성, 치수안정성, 오존저항성 등의 장점은 그대로 살리면서도 황가황이 가능하여 열가소성의 EVA가 갖는 사용온도의 한계 문제와 기계적 특성 즉, 경도, 인장강도, 인장 응력, 신장율 등온 향상시켰다. 비diene계 고분자와 diene계 고분자의 블렌드에 있어서 개질에 대한 연구가 더 수행되어진다면 합성고무에서 나타나는 부족한 가공성, 내산화 안정성, 접착성 등을 크게 향상시킬 수 있을 것이며 아울러 EVA의 융해유동성을 이용한 고무제품 가공공정의 연속화가 가능하게 될 것이다.

• BMB Reports
• /
• 제31권1호
• /
• pp.58-63
• /
• 1998

In this study, a mouse monoclonal antibody (mAb) against gp41(584-618), the immunodominant epitope protein, was generated. For this purpose, BALB/c mice were immunized with double branched multiple antigenic peptides derived from the HIV-1 gp41(584-618) sequence, and antibody-secreting hybridoma were produced by fusion of mice splenocytes with SP2/0 myeloma cells. One clone producing an antigen specific mAb, termed KI-41(isotype IgG1) was identified, whose specific reactivity against gp41(584-618) could be confirmed by ELISA and Western blot analysis. Epitope mapping revealed the recognition site of the mAb KI-41 to be located around the sequence RILAVERYLKDQQLLG, which comprises the N-terminal region within the immunized gp41(584-618) peptied. Since this mAb recognizes this specific epitope within the HIV-1 gp41 without any cross-reactivity to other immunodominant regions in the HIV-2 gp35, KI-41 will provide some alternative possibilities in further applications such as the development of indirect or competitive ELISA for specific antibody detection in HIV-1 infection or for other basic researches regarding the role and function of HIV-1 gp41.

• Journal of Welding and Joining
• /
• 제27권4호
• /
• pp.54-59
• /
• 2009

In the process to manufacture for metallic structures, control of welding deformation is one of an important problems connected with reliability of the manufactured structures so that welding deformation should be measured and controlled with quickly and actively. Also, welding parameters which have as lot of effects on welding deformation such as arc voltage, welding current and welding speed can also be controlled. The objectives for this study were to develop a simple 2-D FEM to calculate not only the transient thermal histories but also the sizes of fusion and heat-affected zone (HAZ) in multi pass arc welds including the butt and fillet weld type with dissimilar thickness, and to concentrate on a developed model for the finding the parameters of Godak's moving heat source model based on a GA. The developed model includes a GA program using MATLB and GA toolbox, and a batch mode thermal model using ANSYS software. Not only the thermal model was verified by comparison with Goldak's work but also the developed model was validated with molten zone section experimental data.

• Journal of Korean Neurosurgical Society
• /
• 제29권4호
• /
• pp.528-535
• /
• 2000

Objective : To investigate objectively the postoperative improvement of gait disturbance in patients with cervical myelopathy through a gait analysis. Patients and Methods : Ten patients who underwent cervical decompression and fusion for cervical myelopathy caused by spondylosis, OPLL, or concomitant hypertrophy of ligamentum flavum were studied. Preoperatively, gait disturbance was present in all patients. The patients were evaluated by gait analysis using three dimensional motion analyzer to collect data of linear and kinematic parameters before surgery, 1 week and 3 months after surgery. Statistical analysis of the related pre-and post-operative data were performed. Results : In the linear parameters, average value of cadence, walking speed, stride length, step time, width and double support were increased postoperatively compare to preoperative value. In the kinematic parameters, average value of knee flexion during initial swing phase, plantar flexion of ankle and range of motion of hip joint were increased as well. These differences were statistically significant(p<0.05). Conclusion : This study suggests that gait analysis can be used as a method of quantitative analysis of postoperative gait improvement in patients with cervical myelopathy.

• Molecules and Cells
• /
• 제42권11호
• /
• pp.783-793
• /
• 2019

When endoplasmic reticulum (ER) functions are perturbed, the ER induces several signaling pathways called unfolded protein response to reestablish ER homeostasis through three ER transmembrane proteins: inositol-requiring enzyme 1 (IRE1), PKR-like ER kinase (PERK), and activating transcription factor 6 (ATF6). Although it is important to measure the activity of ATF6 that can indicate the status of the ER, no specific cell-based reporter assay is currently available. Here, we report a new cell-based method for monitoring ER stress based on the cleavage of $ATF6{\alpha}$ by sequential actions of proteases at the Golgi apparatus during ER stress. A new expressing vector was constructed by using fusion gene of GAL4 DNA binding domain (GAL4DBD) and activation domain derived from herpes simplex virus VP16 protein (VP16AD) followed by a human $ATF6{\alpha}$ N-terminal deletion variant. During ER stress, the GAL4DBD-VP16AD(GV)-$hATF6{\alpha}$ deletion variant was cleaved to liberate active transcription activator encompassing GV-$hATF6{\alpha}$ fragment which could translocate into the nucleus. The translocated GV-$hATF6{\alpha}$ fragment strongly induced the expression of firefly luciferase in HeLa Luciferase Reporter cell line containing a stably integrated 5X GAL4 site-luciferase gene. The established double stable reporter cell line HLR-GV-$hATF6{\alpha}$(333) represents an innovative tool to investigate regulated intramembrane proteolysis of $ATF6{\alpha}$. It can substitute active pATF6(N) binding motif-based reporter cell lines.

• 비교문화연구
• /
• 제29권
• /
• pp.55-84
• /
• 2012

This paper is to study the Tang Dynasty monk poet Ling-yi's poem world and his significance on history of literature. In Chinese literature history, "the monk poets" is a very unique literature creation group. The means of a word "the monk poet", from the literal can see " he is the monk that Can write poems", which is dedicated to professionally writing poetry monk. Buddhism spread to China, from the Wei and Jin Dynasty beginning has been writing poetry of the monks, but the real meaning of "the monk poet" (i.e., professionally poetry monk) appeared to the Mid-Tang Dynasty period. The monk Ling-yi is the pioneer of the monk poets group and Buddist monk creative poem in Mid-tang Dynasty period. Although the Lingyi life is very short, only 35 had died, and his poetry has not been too much, only 44 songs, but he in this life of 35 years and 44 poems, for the development of classical Chinese poetry left noticeable imprinting. He is not just as monk's high practice and by advocating for great Buddhist scholar, also through the daily meditation in poetry creation practice were obtained at that time of many men of literature and writing respected. This paper from the poem monk Ling-yi double identity - the first is a Buddhist monk, the second is addicted to poetry poet to proceed, step by step, in-depth study as the poem monk Ling-yi's poetry creation characteristic and the creative mentality characteristics. This thesis also explores the poem monk by the creation of poetry pursuit, exploration, finally realized "poem" and "Zen" together as one "Zen poetry" creation mechanism.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.80-81
• /
• 2012

Recently, one of the critical issues in the etching processes of the nanoscale devices is to achieve ultra-high aspect ratio contact (UHARC) profile without anomalous behaviors such as sidewall bowing, and twisting profile. To achieve this goal, the fluorocarbon plasmas with major advantage of the sidewall passivation have been used commonly with numerous additives to obtain the ideal etch profiles. However, they still suffer from formidable challenges such as tight limits of sidewall bowing and controlling the randomly distorted features in nanoscale etching profile. Furthermore, the absence of the available plasma simulation tools has made it difficult to develop revolutionary technologies to overcome these process limitations, including novel plasma chemistries, and plasma sources. As an effort to address these issues, we performed a fluorocarbon surface kinetic modeling based on the experimental plasma diagnostic data for silicon dioxide etching process under inductively coupled C4F6/Ar/O2 plasmas. For this work, the SiO2 etch rates were investigated with bulk plasma diagnostics tools such as Langmuir probe, cutoff probe and Quadruple Mass Spectrometer (QMS). The surface chemistries of the etched samples were measured by X-ray Photoelectron Spectrometer. To measure plasma parameters, the self-cleaned RF Langmuir probe was used for polymer deposition environment on the probe tip and double-checked by the cutoff probe which was known to be a precise plasma diagnostic tool for the electron density measurement. In addition, neutral and ion fluxes from bulk plasma were monitored with appearance methods using QMS signal. Based on these experimental data, we proposed a phenomenological, and realistic two-layer surface reaction model of SiO2 etch process under the overlying polymer passivation layer, considering material balance of deposition and etching through steady-state fluorocarbon layer. The predicted surface reaction modeling results showed good agreement with the experimental data. With the above studies of plasma surface reaction, we have developed a 3D topography simulator using the multi-layer level set algorithm and new memory saving technique, which is suitable in 3D UHARC etch simulation. Ballistic transports of neutral and ion species inside feature profile was considered by deterministic and Monte Carlo methods, respectively. In case of ultra-high aspect ratio contact hole etching, it is already well-known that the huge computational burden is required for realistic consideration of these ballistic transports. To address this issue, the related computational codes were efficiently parallelized for GPU (Graphic Processing Unit) computing, so that the total computation time could be improved more than few hundred times compared to the serial version. Finally, the 3D topography simulator was integrated with ballistic transport module and etch reaction model. Realistic etch-profile simulations with consideration of the sidewall polymer passivation layer were demonstrated.

• 생명과학회지
• /
• 제18권7호
• /
• pp.912-917
• /
• 2008

유전자재조합 hG-CSF의 생리활성을 분석하기 위하여 편상의 암세포로부터 분리되어진 cDNA를 이용하여 hG-CSF 유전자를 분리하여 동물세포(CHO cell lines)를 이용하여 재조합 단백질을 생산하였다. 재조합 단백질의 체내 생리활성을 분석하기 위하여0일과 2일에 피하주사 후 5일에 혈액을 채취하여 백혈구 수를 분석하였다. 투여 전과 비교하여 5일째에 백혈구 수는 현저하게 증가하였다. 또한, pEGFP-mUII-hG-CSF벡터를 소 태아로부터 분리되어진 체세포에 형질전환을 시켜서, EGFP signal을 나타내는 세포를 confocal를 이용하여 분리하여 수립하였다. 따라서, 이러한 결과는 유전자재조합 hG-CSF는 체내에서 강력한 생리활성을 나타내며, 또한 당쇄가 첨가되어지고 이중으로 연결되어진 새로운 돌연변이체를 포함하여 고 활성 재조합체의 생산이 가능할 것으로 보이며, pEGFP-mUII-hG-CSF벡터는 복제 형질전환 가축 생산을 위하여 유용하게 사용되어질 것으로 사료된다.

• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.61-65
• /
• 2009

본 논문에서는 형광체가 없는 백색 LED의 성장과 광학적인 특성을 분석하였다. 혼합소스(miked-source) HVPE(hydride vapor phase epitaxy) 방법과 다중성장보트를 이용하여 MOCVD로 얇게 성장한 n-GaN 위에 활성층을 AlGaN으로 한 이종접합구조(DH; Doublehetero structure)를 성장하고, 패키징 단계를 거쳐 비형광체 단일칩 백색 LED 램프를 제작하였다. 패키징 한 소자를 주입전류 $10{\sim}100mA$로 변화시켜 측정한 결과 색 연색성 값은 72-93, 색좌표의 좌표값은 X값은 $0.26{\sim}0.34$, Y값은 $0.31{\sim}0.40$에서 가지며, 색온도는 $5126{\sim}10406K$ 범위에서 측정되었다. 또한 주입전류 증가 시, 형광체를 사용한 백색 LED는 청색 영역으로 이동하지만, 제작된 백색 LED는 황색영역으로 색좌표가 이동하였다. 이러한 특성을 통하여 고감도의 색 연색성 값을 가지는 비형광체 백색LED의 성장 가능성을 확인하였으며, 광 특성 분석 결과를 통하여 혼합소스의 성장 메커니즘을 제안하고자 한다.