• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.435-437
• /
• 1997

In order to develop the three phase GTO CSI with double recovery path of commutation energy by passive devices (LCD), we studied the clamping circuit to protect switching device and energy recovery circuit to recover absorbed energy of capacitor and DC link inductor. In this paper, we investigated how DC input power is increased or decreased according to energy recovery path with or not in the three phase GTO current source inverter. We used a induction motor as the load of inverter, and controlled a induction motor with V/F constant control. Experimental results show that dissipated DC power is decreased and capacitor voltage Vc is effectively suppressed by double recovery path.

• Journal of information and communication convergence engineering
• /
• v.13 no.4
• /
• pp.280-285
• /
• 2015

Double random phase encryption (DRPE) is one of the well-known optical encryption techniques, and many techniques with DRPE have been developed for information security. However, most of these techniques may not solve the fundamental security problem caused by using fixed phase masks for DRPE. Therefore, in this paper, we propose a key phase mask updating scheme for DRPE to improve its security, where a spatial light modulator (SLM) is used to implement key phase mask updating. In the proposed scheme, updated key data are obtained by using previous image data and the first phase mask used in encryption. The SLM with the updated key is used as the second phase mask for encryption. We provide a detailed description of the method of encryption and decryption for a DRPE system using the proposed key updating scheme, and simulation results are also shown to verify that the proposed key updating scheme can enhance the security of the original DRPE.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.395-398
• /
• 2002

In this paper, we propose a system that is configured with double stereo-visions to measure jaw movement. This new system measures not only left and right hinge points of jaw motion but also floating paths of hinge points during lateral and protrusive movement. The resulting 3D position and path data can also be used for 3D graphic simulation technique for occlusion diagnosis and therapy. The system also considers the compatibility with conventional occlusion therapy devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.209-209
• /
• 2012

High-efficient transparent conductive oxide (TCO) film-embedding Si heterojunction solar cells were fabricated. An additional doping was not applied for heterojunction solar cells due to the spontaneous junction formation between TCO films and an n-type Si substrate. Three different TCO coatings were formed by sputtering method for an Al-doped ZnO (AZO) film, an indium-tin-oxide (ITO) film and double stacks of ITO/AZO films. An improved crystalline ITO film was grown on an AZO template upon hetero-epitaxial growth. This double TCO films-embedding Si heterojunction solar cell provided significantly enhanced efficiency of 9.23% as compared to the single TCO/Si devices. The effective arrangement of TCO films (ITO/AZO) provides benefits of a lower front contact resistance and a smaller band offset to Si leading enhanced photovoltaic performances. This demonstrates a potential scheme of the effective TCO film-embedding heterojunction Si solar cells.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.5
• /
• pp.11-16
• /
• 1984

In this paper, the construction of the Liquid Phase Epitaxy system for fabricating III-V compound semiconductor devices and the method of growing AIGaAs/GaAs Double-Hetero-structure are discussed. The possibility of this Double-Heterostructure for the Light Emitting Diode is confirmed also.

• Korean Journal of Materials Research
• /
• v.6 no.6
• /
• pp.568-575
• /
• 1996

The double sided buried contact(DSBC)silicon solar cell processing requires doping of the rear and front grooves with boron and phosphorus respectively. The successful electroless plating of these grooves with the appropriate metals haave been found to depend on the boron conditions for the rear fingers. However, an increased understanding of electroless plating has removed this restriction. Thus the DSBC cells using different boron conditions can be electrolessly plated with ease. This paper presents the recent work done on metallizing the double sided buried contact silicon solar cells with heavily doped boron grooves. The cells results indicate that, the heavier the boron grooves, the poorer the cell performance because of the probable higher metal contact recombination associated with boron grooves.

• Journal of Power Electronics
• /
• v.13 no.3
• /
• pp.362-368
• /
• 2013

Commercial home appliances using remotely controlled systems consume electric power while in standby mode to prepare for receiving a remote turn-on signal. The proposed power system can significantly reduce standby power consumption without increasing cost. Furthermore, since a Electronic Double Layer Capacitor (EDLC) is used as an auxiliary power storage element, the life cycle is longer and system reliability can be better than with existing approaches. When the energy of the EDLC is not sufficient for turning on the appliance, the power system charges the EDLC without affecting the main system. The proposed power system is verified with a commercial LCD TV and a 3.93mW standby consumption is obtained. This standby consumption can be regarded as zero standby equipment according to the IEC-62031 standard.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.4
• /
• pp.43-52
• /
• 2021

IoT applications are quickly spread in many fields. Blockchain methods(BC), defined as a distributed sharing mechanism, offer excellent support for IoT evolution. The BC provides a secure way for communication between IoT devices. However, the IoT environments are threatened by hacker attacks and malicious intrusions. The IoT applications security are faced with three challenges: intrusions and attacks detection, secure communication, and compressed storage information. This paper proposed a system based on double-blockchain to improve the communication transactions' safety and enhance the information compression method for the stored data. Information security is enhanced by using an Ellipse Curve Cryptography(ECC) considered in a double-blockchain case. The data compression is ensured by the Compressed Sensing(CS) method. The conducted experimentation reveals that the proposed method is more accurate in security and storage performance than previous related works.

• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.119-126
• /
• 2021

The Internet of Things (IoT) applications are quickly spread in many fields. Blockchain methods (BC), defined as a distributed sharing mechanism, offer excellent support for IoT evolution. The BC provides a secure way for communication between IoT devices. However, the IoT environments are threatened by hacker attacks and malicious intrusions. The IoT applications security are faced with three challenges: intrusions and attacks detection, secure communication, and compressed storage information. This paper proposed a system based on double-blockchain to improve the communication transactions' safety and enhance the information compression method for the stored data. Information security is enhanced by using an Ellipse Curve Cryptography (ECC) considered in a double-blockchain case. The data compression is ensured by the Compressed Sensing (CS) method. The conducted experimentation reveals that the proposed method is more accurate in security and storage performance than previous related works.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1559-1562
• /
• 2022

As electronic devices technology scales down into the deep-submicron to achieve high-density, low power and high performance integrated circuits, multiple bit upsets by soft errors have become a major threat to on-chip memory systems. To address the soft error problem, single error correction, double error detection and double adjacent error correction (SEC-DED-DAEC) codes have been recently proposed. But these codes do not troubleshoot mis-correction problem. We propose the SEC-DED_DAEC code with without mis-correction. The decoder for proposed code is implemented as hardware and verified. The results show that there is no mis-correction in the proposed codes and the decoder can be employed on-chip memory system.