• Title/Summary/Keyword: Double bottom

검색결과 284건 처리시간 0.03초

도핑농도에 따른 비대칭 이중게이트 MOSFET의 문턱전압이동현상 (Threshold Voltage Movement for Channel Doping Concentration of Asymmetric Double Gate MOSFET)

  • 정학기;이종인;정동수
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2014년도 춘계학술대회
    • /
    • pp.748-751
    • /
    • 2014
  • 본 연구에서는 비대칭 이중게이트(double gate; DG) MOSFET의 채널 도핑농도 변화에 따른 문턱전압이동현상에 대하여 분석하였다. 비대칭 DGMOSFET는 일반적으로 저농도로 채널을 도핑하여 완전결핍상태로 동작하도록 제작한다. 불순물산란의 감소에 의한 고속동작이 가능하므로 고주파소자에 응용할 수 있다는 장점이 있다. 미세소자에서 필연적으로 발생하고 있는 단채널효과 중 문턱전압이동현상이 비대칭 DGMOSFET의 채널도핑농도의 변화에 따라 관찰하고자 한다. 문턱전압을 구하기 위하여 해석학적 전위분포를 포아송방정식으로부터 급수형태로 유도하였다. 채널길이와 두께, 산화막두께 및 도핑분포함수의 변화 등을 파라미터로 하여 도핑농도에 따라 문턱전압의 이동현상을 관찰하였다. 결과적으로 도핑농도가 증가하면 문턱전압이 증가하였으며 채널길이가 감소하면 문턱전압이 크게 감소하였다. 또한 채널두께와 하단게이트 전압이 감소하면 문턱전압이 크게 증가하는 것을 알 수 있었다. 마지막으로 산화막두께가 감소하면 문턱전압이 증가하는 것을 알 수 있었다.

  • PDF

이중 탄성중합체 시일의 절단부 오일누유 예측 (Oil Leakage Prediction through Cut Part of Double Elastomeric Seal)

  • 이택성;김연희
    • 한국전산구조공학회논문집
    • /
    • 제36권3호
    • /
    • pp.165-171
    • /
    • 2023
  • 건설기계와 특장차의 상부와 하부 구조를 연결하는 로터리 조인트는 축과 하우징이 회전하면서 유압을 전달하는데 오일의 유로에 누유를 방지하기 위해 여러 개의 시일이 조립된다. 시일재료는 강성이 커서 조립에 어려움이 있기 때문에 자른 후 조립하는 방법을 모색하였다. 절단면의 모양은 L형과 /형으로 하였고 유압이 작용할 때 누유 기준은 절단면에 발생하는 접촉압력으로 하였다. 시일의 구조와 재료는 이중 탄성중합체로 구성되며 강성이 큰 PE 재질만 절단한 경우에 대하여 비선형 접촉 구조해석을 수행하였다. 연구결과 절단 길이가 짧을수록 누유 방지에 유리하며 PE와 하우징이 접촉하는 윗면보다 NBR과 PE가 접촉하는 아랫면으로 누유될 가능성이 큰 것으로 나타났다.

생활폐기물(生活廢棄物) 소각(燒却) 바닥재의 자력선별(磁力選別)에 따른 ferrous material의 분리(分離) 특성(特性) (Separation of Ferrous Materials from Municipal Solid waste Incineration Bottom Ash)

  • 엄남일;한기천;유광석;조희찬;안지환
    • 자원리싸이클링
    • /
    • 제16권3호
    • /
    • pp.19-26
    • /
    • 2007
  • 도심지에서 발생하는 생활폐기물들은 재활용 가능한 목재나 iron 등을 분리시킨 후 소각장으로 보내지기 때문에 자기류나 유리류 그리고 가장 많은 양을 차지하고 있는 가연성 물질로 존재하게 된다. 하지만 소각 전 분리 공정에도 불구하고 생활폐기물에서의 iron의 함유량은 약 $3{\sim}11%$에 달하고 있다. 이러한 iron은 소각로에서 소각 처리될 경우 약 $1000^{\circ}C$의 온도(로의 내부 온도)에서 산화반응에 의해 표면에 산화물 층을 형성하게 된다. 소각된 바닥재는 water-cooling냉각 처리를 통해 냉각되며 물과 접촉한 iron 표면의 산화물 층은 심한 붕괴가 일어나 부식작용이 더욱 활발히 일어나며 많은 양의 ferrous material($Fe_3O_4,\;Fe_2O_3,\;FeS_2$)을 생성하게 된다. 이러한 iron과 ferrous material은 산화 환원 작용에 의해 부피변화를 일으키기 때문에 시멘트 골재 등으로의 재활용 시 많은 문제점을 일으킬 수 있다. 따라서 본 연구에서는 소각 바닥재를 이용하여 각 입도별 자력선별에 따른 ferrous material의 분리 특성에 대해 연구하였다. 그 결과 전체 바닥재의 약 18.7%(ferrous product; $Fe_3O_4,\;Fe_2O_3,\;FeS_2$, iron)가 자력선별(자력세기:3800gauss)에 의해 분리 되었으며 1.18mm이상의 입도에서 전체 ferrous product의 87.7%가 분포하였다. iron의 경우 전체 바닥재의 약 3.8%의 함유량을 보였으며 1.18mm이상의 입도에서 전체 iron의 99%이상이 존재하였다.

원자력시설 해체 시 특성평가를 위한 표면오염 탐지 이중구조 고분자 복합체의 제조 (Preparation of polymeric composites for surface contamination measurement in order to characterize nuclear facilities decommissioning)

  • 한명진;서범경;우주희;이근우
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2004년도 학술논문집
    • /
    • pp.97-104
    • /
    • 2004
  • 원자력시설의 해체를 위한 표면오염도를 측정함에 있어 기존의 일반적인 단일층 함침 복합체의 단점을 개선한 치밀한 구조의 지지층 위에 활성층의 2차막을 도포 하여 제조된 이중 구조의 고분자 복합체를 제조하고 이들의 특성을 분석하였다. 세륨활성화된 이트리움실리케이트(Cerium-activated ytttrium silicate, CAYS)를 함침시킨 폴리설폰 이중구조 필름은 1차 지지층으로서 폴리설폰 (polysulfone, PSF)과 메틸렌클로라이드 (methylene chloride, MC)로 이루어진 2액용액을 유리판 위에 제막하고 증발을 통해 MC를 제거하여 고분자의 유리화(vitrification)를 통해 치밀한 구조로 고형화하도록 하였다. 고형화한 1차층 위에 CAYS 와 용매로 이루어진 2차 제막용액을 덧붙여 도포하고 물에 침지시키거나 대기방치를 통해 고형화시켰다. 이렇게 이루어진 2중 구조의 무기섬광체 함침 복합체 필름은 2차 제막층에 손가락 형태의 큰 기공이 생성되었으며, 1차층과 2차층이 완전히 결합되어 있어 우수한 기계적 물성을 나타냈다. 한편, 섬광체인 CAYS를 첨가하였을 때 필름에 생성되는 은 기공의 형성이 증대되는 특성을 보였으며, 용매의 증발에 의해 고형화 된 필름은 치밀한 구조의 형상을 보였다. 제조된 필름들은 방사성핵종의 탐지에 있어 신뢰할만한 탐지 결과를 보였다.

  • PDF

석탑 탑구(塔區)의 역할 및 변천에 관한 연구 (A Study on the Role and Transition of the Tapgu in Stone Pagoda)

  • 정해두;장석하
    • 건축역사연구
    • /
    • 제19권1호
    • /
    • pp.91-104
    • /
    • 2010
  • Korea's stone buildings are varied in their types such as stone pagodas, stone lanterns, stone bridges, stoneworks, etc. These account for more than 30% over the entire cultural properties, but research achievements are lacking compared to wooden buildings. Accordingly, this study aims to identify the shape, role and transition of Tapgu, which had been used to set up boundary at a stone pagoda, one of the stone buildings. The 20th stone pagodas, which have relative accuracy in its forming year, have been studied around national treasure or treasure between 7th century and 9th century. There are a lot of different opinions about the role and meaning of Tapgu, and at this writer's option, Tapgu is defined as follows: First, each structure plays a different role. A structure to pass the load in the upper part to the ground can be seen as a stair or a pedestal, but a structure to form double foundations can be considered as Tapgu. Second, Tapgu can be used to divide areas with stones or stepping stones. As a result, the shape, role and transition of Tapgu is as follows: Firstly, when it comes to its shape, Tapgu includes flagstone type, belt type, double foundation type, compound type. Flagstone type had been used to set up boundary at stone pagodas by using foundation stone, belt type by keeping apart from stone pagodas, and double foundation stone by installing dual foundation stones. Secondly, Tapgu is considered to set up boundary in the case of flagstone and plate stone, and acts like a structure which can prevent surrounding area of stone pagoda from coming up while being stuck around stone pagodas. Belt type was installed only for the purpose of forming boundary. At the bottom, double foundation stone had been used to pass the load in the upper part to the ground in the same way as the foundation stone in the upper part, and the boundaries were set varying the size. Thirdly, when it comes to the transition of Tapgu, flagstone type of boundary stone had been installed in the 7th century, and belt type of boundary stone had been mainly installed in the 8th century. And double foundation stone had been installed in the 9th century. Comprehensively, flagstone type and belt type had been made around the 7th and 8th century when Tapgu was regarded important and stone pagoda started to be built. At the turn to the 9th century, the role of Tapgu had been increasingly losing in the construction of stone pagoda, and foundation stone started to appear.

이중 나선형 NiFe 자성 박막인덕터를 이용한 원칩 DC-DC 컨버터 (Double rectangular spiral thin-film inductors implemented with NiFe magnetic cores for on-chip dc-dc converter applications)

  • 이영애;김상기;도승우;이용현
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.71-71
    • /
    • 2009
  • This paper describes a simple, on-chip CMOS compatible the thin-film inductor applied for the dc-dc converters. A fully CMOS-compatible thin-film inductor with a bottom NiFe core is integrated with the DC-DC converter circuit on the same chip. By eliminating ineffective top magnetic layer, very simple process integration was achieved. Fabricated monolithic thin film inductor showed fairly high inductance of 2.2 ${\mu}H$ and Q factor of 11.2 at 5MHz. When the DC-DC converter operated at $V_{in}=3.3V$ and 5MHz frequency, it showed output voltage $V_{out}=8.0V$, and corresponding power efficiency was 85%.

  • PDF

Quantitative identification of the fluxon-flow modes in a stack of intrinsic Josephson junctions of $Bi_2$$Sr_2$Ca$Cu_2$$O_{8+x}$ single crystals

  • Bae, Myung-Ho;Lee, Hu-Jong
    • Progress in Superconductivity
    • /
    • 제5권1호
    • /
    • pp.9-12
    • /
    • 2003
  • We observed the splitting of the fluxon-flow branches in the current-voltage characteristics of serially stacked intrinsic Josephson junctions (IJJs) formed in $Bi_2$$Sr_2$$CaCu_2$$O_{ 8+x}$ single crystals in the long-junction limit. Stacks of IJJs were sandwiched between two Au electrodes deposited on the top and the bottom of the stack using the ‘double-side cleaving technique’. In all the samples studied, the branch splitting started occurring for a dense fluxon configuration around 2 T and became more distinct in a higher magnetic field range. This observation can be explained in terms of switching between different Josephson fluxon modes in resonance with the collective plasma oscillations induced by both inductive and capacitive coupling between stacked IJJs. This is the first detailed and quantitative identification of the coherent flux-flow modes in stacked..

  • PDF

Shear strength of connections between open and closed steel-concrete composite sandwich structures

  • Kim, Woo-Bum;Choi, Byong Jeong
    • Steel and Composite Structures
    • /
    • 제11권2호
    • /
    • pp.169-181
    • /
    • 2011
  • The behavior of connections between open sandwich slabs and double steel skin composite walls in steel plate-concrete(SC) structure is investigated by a series of experimental programs to identify the roles of components in the transfer of forces. Such connections are supposed to transfer shear by the action of friction on the interface between the steel surface and the concrete surface, as well as the shear resistance of the bottom steel plate attached to the wall. Experimental observation showed that shear transfer in slabs subjected to shear in short spans is explained by direct force transfer via diagonal struts and indirect force transfer via truss actions. Shear resistance at the interface is enhanced by the shear capacity of the shear plate as well as friction caused by the compressive force along the wall plate. Shear friction resistance along the wall plate was deduced from experimental observation. Finally, the appropriate design strength of the connection is proposed for a practical design purpose.

선체구조의 용접이음부의 피로강도 해석법에 관한 연구 (A Study on the fatigue strength analysis of the welded joints in ship hull construction)

  • 엄동석;강성원;이성구;김원범
    • Journal of Welding and Joining
    • /
    • 제10권4호
    • /
    • pp.259-267
    • /
    • 1992
  • In this report, a method to predict the fatigue strength in welded structure member of ship construction is studied considering the effects of statistical characteristics of mild steels and weld toe shapes on the fatigue crack initiation life. The fatigue test under pulsating bending load is carried out with the model specimens of the web frame in double bottom of ship hull. The propriety of the fatigue life curve with probability of failure in the transverse strength members of ship hull construction is confirmed by the comparison with the results of fatigue test on the model of the various transverse strength members.

  • PDF

The optimum simulation and real test of double prismatic Light-guide plate for a high brightness LCD backlight unit

  • Yoon, D.K.;Park, D.S.;Oh, Y.S.;Bae, K.W.;Kim, K.H.;Lim, Y.J.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1503-1506
    • /
    • 2005
  • This dissertation represents method concerning high performance prism LGP design in 17 inch TFT-LCD. By means of developing LGP with total size of 8mm that has prism on both upper side and bottom side, it is superior to previous printing way in gaining high brightness. It can realize actual material simulation on prism LGP production using 17inch injection process and about 20% luminance enhancement is achieved based on such method.

  • PDF