• 소성∙가공
• /
• 제32권6호
• /
• pp.376-383
• /
• 2023

The torsion bar, which is a steering torque sensor, is mounted between the steering pinion and the input shaft in the IPA(input pinion assembly). Accurate torque measurement is important to improve the sense of operation, and the straightness of the torsion bar can affect torque measurement. In this study, the amount of bending was measured and the exact shape was analyzed regarding the bending phenomenon in the press-fitting process for torsion bars. The effect of alignment error was analyzed through finite element forming analysis. Process data analysis was conducted for the double-end press fit model. If there is an alignment error of about 10% of the serration tooth height, the indentation load is reduced by about 10%. If there is an alignment error, the torsion bar is rotated.

• Structural Engineering and Mechanics
• /
• 제91권3호
• /
• pp.291-300
• /
• 2024

This paper predicts the combined resonance behavior of the truncated conical shells (TCSs) under transverse and parametric coupled excitation. The motion governing equation is formulated in the framework of high-order shear deformation theory, von Kármán theory and Hamilton principle. The displacements and boundary conditions are characterized by a set of displacement shape functions with double Fourier series. Subsequently, the method of varying amplitude (MVA) is utilized to derive the approximate analytical solution of system response of TCSs. A comparative analysis is conducted to verify the accuracy of the current computational method. Additionally, the interaction mechanism of combined resonance, parametric resonance and primary resonance is examined. And the effect of damping coefficient, the external excitation, initial phase, axial motion speed, temperature variation, humidity variation, material properties and semi-vortex angle on the vibration mechanism are analyzed.

• 대한환경공학회지
• /
• 제22권12호
• /
• pp.2215-2226
• /
• 2000

수중에서 친수성을 나타내는 부유물질의 안정성에 대한 계면활성제의 영향을 고찰하기 위해 quartz에 대한 잔세이트 homologs의 흡착양상을 FT-IR spectroscopy를 통해 조사함으로써 흡착반응 메카니즘을 규명하고자 하였다. 그리고, 이의 결과를 동일 조건에서의 접촉각의 측정 결과와 비교고찰함으로써 반응 메카니즘 해석에 대한 신뢰성을 부여하였다. 에틸 잔세이트의 경우 흡착시간에 따라 quartz 표면에 monolayer를 형성한 후에 계속하여 reverse orientation을 통한 흡착이 진행되어 double layer가 형성됨이 관찰되었다. 프로필과 부틸 잔세이트의 경우에도 유사한 경향이 나타났는데, alkyl group의 C분자수가 증가함에 따라 흡착시간은 감소됨이 파악되었다. Young's equation을 통한 흡착반응의 열역학적 관점에 대해 논하였으며, 동일한 잔세이트의 경우 농도 변화에 따른 흡착속도의 변화에 대해서도 관찰하였다. 본 연구를 통해 수계에서 계면활성제가 부유성 물질에 작용하는 양상은 계면활성제의 농도와 분자구조, 그리고 수중에서 이 물질이 잔류하는 시간에 따라 크게 영향을 받음을 알 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제19권2호
• /
• pp.231-248
• /
• 2017

서울시는 도심지 교통체증을 해결하기 위해 최근 경부고속도로의 일부 구간을 복층터널로 계획하는 방안을 검토하고 있다. 도심지에 복층터널을 건설할 경우, 교통난 해소뿐만 아니라 말레이시아 스마트 터널과 같이 홍수 시 침수방지를 위한 저류시설로도 활용할 수 있을 것으로 본다. 그러나 도로터널을 복층터널로 계획할 경우에는 각 지역을 연결하는 분기터널이 필요하며, 분기터널은 토피가 낮은 구간에 편평율이 큰 대단면 또는 복잡한 터널 단면형상으로 이루어지게 된다. 이때 토피가 낮은 지역에서는 지하 공동구나 건물 기초 등에 인접하여 위치하게 되며 터널 건설로 인해 지장물에 미치는 영향에 대해 반드시 검토해야 한다. 본 연구에서는 복층터널에서 분기되는 터널 굴착 시, 지하 공동구에 미치는 영향을 수치해석을 통해 분석하였다. 변위조절모델(Displacement Controlled Model)을 이용하여 터널 주변의 지반손실률을 1.0%, 3.0%, 그리고 5.0%까지 모사하였다. 복층터널에서 분기되는 각도를 $45^{\circ}$와 $36^{\circ}$로 다르게 설정하여 공동구 측면 및 하부로의 접근을 고려할 수 있도록 하였다. 그 결과, 일반적으로 분기터널이 공동구에 근접할수록 그리고 지반손실률이 클수록 변위, 각변위 그리고 안정성에 미치는 영향이 큰 것으로 타나났다. 공동구 바닥부의 침하와 공동구 부재의 안정성에는 이격거리 보다는 공동구의 하부에 근접하여 큰 변위와 부등침하를 유발할 수 있는 각도 $36^{\circ}$, 이격거리 10 m가 가장 취약한 것으로 나타났다. 본 연구를 통해 근접시공 시 구조물의 안정성 평가를 위한 각변위-거리/직경 관계를 제시하였으며, 지하 공동구 안정성에 영향을 미치는 한계 임계 지반손실률을 산정하였다.

• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.927-934
• /
• 2014

Today Hanbok, the symbol of our nation's culture, has been preserved as cultural heritage despite natural and social environmental changes over years. This study is analyzing Hanbok which were taken in the National Skills Competition from 2000 to 2013; it presents our traditional stitching methods and clarifies the pride the Hanbok artisans have as inheriting the traditional heritage. Therefore this paper contributes to continuous and proper development of the culture of Hanbok and being loved by many people. The assignments about Hanbok featured in the National Skills Competition were categorized by national and local competition, time required to produce assignments, required amount of fabric, type of stitching, unlined and lined clothes depending on the type of assignment; according to the classification, methods for sewing were analyzed in detail. First, the national tournament presented 12 kinds of sewing techniques; especially hand-sewn stitching method appeared in common. Second, the unlined and lined clothes depending on the type of assignments had applied different sewing methods; double-stitching, flat fell seam, french seam, roll over sewing, blind stitch, right angle blind stitch, decorative saddle stitching, darning, etc. were used. Sewing methods in the 21st century has not changed over the years; the shape of clothes was changed upon trends. Sewing became easier than before by the invention of sewing machine, we should carry on our traditional sewing techniques. Through this analysis on sewing methods of the National Skills Competition, I hope to support competition participants for studying Hanbok and indicate proper sewing techniques.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4733-4739
• /
• 2012

본 논문에서는 태양과 태양전지 모듈이 법선을 이루도록 기존에 태양의 방위각 및 고도각을 제어하는 양축 추적시스템에 2개의 센서를 사용하였던 Double-sensor방식에서 1개의 센서로 방위각 및 고도각을 제어할 수 있는 One-sensor방식의 양축 추적시스템을 제안하였다. 그리고 제안한 추적시스템을 제작하여 시스템의 실제 운전을 실행하였다. 제안한 추적시스템은 1개의 센서를 이용하여 태양이 항상 법선을 이루면서 태양전지 모듈에 입사되게 제어하기 위해 방위각과 고도각을 제어하는 양축 추적시스템이다. 실험결과 가장 효율적인 운전과 불필요한 구동부의 동작을 방지하여 전력소모를 감소할 수 있었으며 고정식에 비해 본 논문에서 제안한 One-sensor방식의 양축 추적시스템이 약 23[%]의 발전효율이 증가함을 확인 할 수 있었다. 태양을 추적하여 더 많은 햇빛을 받게 하여 태양전지의 효율을 높이기 위하여 행해진 추적장치는 대형 방식에 많은 연구가 진행되어 왔다. 따라서 본 논문의 태양위치추적의 모니터링 시스템을 구축하여 지속적인 발전효율에 대한 실용화 연구를 통해 태양광발전시스템 보급에 큰 역할을 할 것이라 기대된다.

• Elastomers and Composites
• /
• 제52권3호
• /
• pp.180-186
• /
• 2017

In this work, the effect of low-temperature dehydration of a poly(styrene-co-styrenesulfonic acid) (PSSA) membrane was investigated by differential scanning calorimetry, fourier transform infrared spectroscopy (FT-IR), electron magnetic resonancespectroscopy (EMR), and $^1H$- and $^{13}C$ solid-state nuclear magnetic resonance spectroscopy. These analyses were performed at room temperature for powdered PSSA specimens with and without dehydration and the following key observations were made. First, FT-IR analysis showed that low-temperature dehydration not only transformed the [${SO_3}^-{\cdots}H^+$] ionic pair in the non-hydrated PSSA to an $SO_3H$ group, but also induced the formation of -C=C- double bonds in the dehydrated PSSA. Second, the ${-SO_3}^{\bullet}$ radical was unambiguously identified by EMR spectroscopy. Third, H-abstraction was detected by $^1H$ magic-angle spinning spectroscopy. Finally, an unexpected color shift from white for the non-hydrated PSSA to a yellowish brown for the dehydrated sample was observed. In order to explain these experimental results, it was proposed that the formation of the intermediate hydrogen ($H^{\bullet}$) or hydroxyl radical ($HO^{\bullet}$) species was initiated by the dehydration process. The sespecies attacked the $SO_3H$ group and the tertiary proton at the ${\alpha}-carbon$, resulting in the formation of $-SO^{\bullet}$ radicals and -C=C- double bonds, which correlated with the color shift in the dehydrated PSSA sample. The semechanisms are useful for understanding the simultaneous loss of an aromatic ring and -SO- groups in the PSSA fuel cell membrane.

• 한국운동역학회지
• /
• 제21권2호
• /
• pp.141-152
• /
• 2011

The purpose of this study was to investigate the projectile factors and biomechanical characteristics of men's hammer throwing during turning phases. Four national leveled athletes including Korea national record holder participated in this study. After full warm-up, each participant performed 6 trials of hammer throwing with their best. The best recorded trial was selected from each participant and they were analyzed for this study. Three-Dimensional motion analysis using a system of 5 video cameras at a sampling frequency 60Hz was performed for this study. As the number of turns increased, athletes revealed following characteristics. 1) The single and double support time decreased. 2) The rotation foot was closed to axis foot and it revealed greater medio-lateral displacement than that of horizontal one. 3) At the transition point from double support to single support, ball was in front of rotation foot so that not much angular velocity obtained. For the projectile factors, projectile angle did not show differences while projectile height and velocity revealed differences among the participants. It may indicated that each athlete has different fitness and skill level to resist centrifugal force which become larger as the number of turn increased.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.578-585
• /
• 2009

In this paper, we present the design of an electromagnetic scanning mirror with torsional springs. The scanning mirror consisting of torsional springs and electromagnetic coils was designed for the applications of laser animation systems. We analyzed and optimized three types of torsional springs, namely, straight beam springs (SBS), classic serpentine springs (CSS), and rotated serpentine springs (RSS). The torsional springs were analyzed in terms of electrical resistance, fabrication error tolerance, and resonance mode separation of each type using analytical formula or numerical analysis. The RSS has advantages over the others as follows: 1) A low resistance of conductors, 2) wide resonance mode separation, 3) strong fabrication error tolerance, 4) a small footprint. The double-layer coils were chosen instead of single-layer coils with respect to electromagnetic forces. It resulted in lower power consumption. The geometry of the scanning mirror was optimized by calculations; RSS turn was 12 and the width of double-layer coil was $100{\mu}m$, respectively. When the static rotational angle is 5 degrees, the power consumption of the mirror plate was calculated to be 9.35 mW since the resistance of the coil part and a current is $122{\Omega}$ and 8.75 mA, respectively. The power consumption of full device including the mirror plate and torsional springs was calculated to be 9.63 mW.

• 한국태양에너지학회 논문집
• /
• 제31권3호
• /
• pp.109-115
• /
• 2011

It can gain both the electric energy production and disperse of light at the same time if DSSC is applied in the building as window system. It means to help facade design and to be used in lighting, heating, cooling energy directly by applicating DSSC BIPV window that is possible to daylighting and materialization of color. For this, optical characteristics analysis that is basic step must take precedence. So, basic databases of DSSC are builded and optical performances according to the double and triple glazing are evaluated by analyzing spectral data of various colored DSSC. As a result, Green(4) has the highest visible transmittance that is 28.8%, and Blue(3) has the lowest that is 0.3%. And, in case of optical performance of Green(4) depending on the incidence angle, SHGC and Tsol are decreased sharply from more than $60^{\circ}C$. Finally, It is judged that Red(4), Green(1), (4), Blue(4) are suitable for application in office building because visible transmittance is high and solar heat gain coefficient is low relatively in spite of composing to double and triple glazing.