• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.81.3-81.3
• /
• 2017

In this paper, we report a small-scale emerging island and double arc loops, which are associated with a M6.5 flare, in Active Region 12371. We investigate the spatial and temporal changes of both photospheric magnetic fields using SDO/HMI data and coronal magnetic structures obtained from nonliner force-free field (NLFFF) extrapolation. From the vector magnetograms, we find a small-scale emerging island near the main polarityy inversion line about three hours before the flare. The island has a strong shear angle, which is determined by difference between transverse component of observed field and potential field, of around 90 degrees. Furthermore, the NLFFF well reproduces a sigmoidal structure seen in SDO/AIA 94, which is consistent with the double arc loops configuration suggested by Ishiguro and Kusano (2017) who introduced a magnetic configuration showing the double arc instability. The observed emerging island is located among the double arc loops, which is also supproted by their model. Finally, there was an eruption (M6.5 flare) associated with the loops. We discuss a possible role of the double arc instability for the eruption.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.31.1-31.1
• /
• 2013

Barred-spiral galaxies possess double patterns: a bar and spiral arms. While their angular speeds play an important role in governing gas dynamical evolution of barred spiral galaxies, there is no direct way to observe them. The Tremaine-Weinberg (TW) method has been one of the most reliable indirect methods to estimate pattern speeds, although it requires a few strict assumptions, notably one that the gas tracer is in a quasi-steady state. In barred-spiral galaxies, however, non-steady gas flows are significant especially when the double patterns have different angular speeds. Using numerical models, we explore the effect of non-steady gas motions on the determination of double pattern speeds based on the TW method. We find that the TW method is accurate within 15% when there is only a single pattern or when double patterns have the same angular speed. When double patterns have different speeds, on the other hand, neglecting the non-steady flows leads to quite large errors (> 30%) in the derived pattern speeds, and severely underestimate the real values for the viewing angle parallel to the bar minor axis. This suggests that one should be cautious when applying the TW method to galaxies with double patterns with different speeds.

• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.2
• /
• pp.74-80
• /
• 1984

In the reduction gears for marine propulsion engine such as turbine or high speed diesel engine, the standard involute double helical gears are generally used. However the addendum modification gear can be used in the reduction gear as it has flexibility for gear design on the tooth strength, scoring and operating noise. In this case, the determination of gear shaft bearing load is difficult by the alternation of operating pressure angle. In this paper, the formulas of bearing load according to the arrangements of the reduction gears are derived and the diagrams of operating pressure angle according to the modification coefficient are presented.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.2
• /
• pp.223-229
• /
• 2006

Purpose: The purpose of this study was to analyze the results of the treatment of hallux valgus with metatarsal double osteotomy and longitudinal pin fixation. Materials and Methods: We reviewed 19 patients (21 feet) who had been treated by metatarsal double osteotomy and longitudinal pin fixation for the moderate or severe hallux valgus with increased distal metatarsal articular angle (DMAA), between 1999 and 2004. They were followed prospectively for a minimum of 20 months. Functional outcomes were measured via Hallux metatarsophalangeal-Interphalangeal (HMI) scale and Mayo clinic forefoot scoring system (FFSS). Radiographically, we assessed pre, postoperative and at the last follow-up, the hallux valgus angle (HVA), 1st and 2nd intermetararsal angle (IMA), DMAA. Results: The average preoperative HVA, IMA, DMAA measured $36.76^{\circ}$, $13.62^{\circ}$, $26.00^{\circ}$, respectively. At the last follow-up, HVA, IMA, DMAA measured $9.57^{\circ}$, $7.14^{\circ}$, $9.33^{\circ}$. The correction of HVA, IMA, DMAA were $27.19^{\circ}$, $6.48^{\circ}$, $6.67^{\circ}$. At the last follow-up, there were no recurrences and complications, except two patients complained of unsatisfactory stiffness in the 1st metatarsophalangeal joint and subjectively rated their results as fair. The others rated that as excellent or good. At the last follow-up, statistically, the mean HMI scale and FFSS improved significantly from pre-operative score. Conclusions: In the treatment of moderate or severe hallux valgus with increased DMAA by metatarsal double osteotomy and longitudinal pin fixation, we had good functional and radiological results without recurrences and significant complications. But the stiffness in the 1st metatarsophalangeal joint warrants further study.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.59-67
• /
• 2011

This paper is focused on the effect of indoor temperature rise according to the use of windows and blinds in double skin facade in summer. For the experiment, we set up the mock-up of double skin facede and measuring temperature and solar radiation. Total 7 cases were used for measuring solar transmittance and indoor temperature rise. When the venetian blind was not installed, solar transmittance was 44.5%, and solar transmittance for the case that installed the venetian blind (angle 0) was 22.5%. Cases that opened inner and outdoor windows for ventilation showed lower indoor temperature rise than cases with closed windows. In addition, Case 5 (opened inner and outdoor windows with the venetian blind (angle 0) to reduce solar transmittance) indicated lower indoor temperature rise than Case 3(opened inner and outdoor windows). Consequently, Case 5 which uses inner and outdoor window for ventilation and venetian blind to reduce solar transmittance is the most effective way to reduce indoor temperature rise among all cases tested in this research.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.533-542
• /
• 2015

This paper suggest away to maintain constant power through trolley wire by transferring increased line voltage to the AC main line while changing the mode from Converter(Forward) to Inverter(Reverse) when the line voltage is increased due to regenerative power when the train stops, This paper suggests a Double Converter DC substation that can create regenerative power when the train stops reusable. We also proposed using a simulation tool, the optimal Thyrister firing angle that can minimize the undershoot and overshoot that occurs when transferring the mode from Converter to Inverter for quality improvement of DC voltage in the Double Converter in the DC substation from the Busan Urban Subway.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1055-1062
• /
• 2022

In order to use the Massive MIMO (Multi Input Multi Output) technology using the massive array antenna, it is essential to know the angle of arrival (AOA) of the signal. When using a massive array antenna, the existing AOA estimation algorithm has excellent estimation performance, but also has a disadvantage in that computational complexity increases in proportion to the number of antenna elements. To solve this problem, a cascade AOA estimation algorithm has been proposed and the performance of a single-shaped (non)massive array antenna has been proven through a number of papers. However, the computational complexity of the cascade AOA estimation algorithm to which single and double rim array antennas are applied has not been compared. In this paper, we compare and analyze the computational complexity for AOA estimation when single and double rim array antennas are applied to the cascade AOA estimation algorithm.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1040-1048
• /
• 2013

In this paper, a sensorless pitch angle control method for a wind generation system is suggested. One-step-ahead prediction control law is adopted to control the pitch angle of a wind turbine in order for electric output power to track target values. And it is shown that this control scheme using the inverse dynamics of the controlled system enables us to predict current wind speed without an anemometer, to a considerable precision. The inverse input-output of the controlled system is realized by use of an artificial neural network. The proposed control and wind speed prediction method is applied to a Double-Feed Induction Generation system connected to a simple power system through computer simulation to show its effectiveness. The simulation results demonstrate that the suggested method shows better control performances with less control efforts than a conventional Proportional-Integral controller.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.15-20
• /
• 2012

This study is to propose and develop an integrated dynamics control system to improve and enhance the lateral stability and handling performance. To achieve this target, we integrate an AFS and a 4WS systems with a fuzzy logic controller. The IDCS determines active additional steering angle of front wheel and controls the steering angle of rear wheel. The results show that the IDCS improves the lateral stability and controllability on dry asphalt and snow paved road when double lane change and step steering inputs are applied. Yaw rate of the IDCS vehicle tracks reference yaw rate very well and body slip angle is reduced about by 50%. Response time of the IDCS vehicle is also decreased.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.3
• /
• pp.95-105
• /
• 1984

The purpose of this paper is to predict the cutting force, utilizing new model of double cutting edge which has normal rake angle and tool inclination angle. Changing side, back rake angle and side cutting edge angle in the new model. Three dimensional cutting force was obtained by the use of .eta. /c=i proposed by Stabler and energy method for three dimen- sional cutting force. Theoretical results has been calculated with development of optimization algorism which can be put into three dimensional theory, using the method of least square with orthogonal cutting data. IT is proved that three dimensional cutting force is to be predicted accurately only if orthogonal cutting force by equalizing theoretical result and experimental result has been calculated.