• Journal of the Korean Geotechnical Society
• /
• v.30 no.12
• /
• pp.51-61
• /
• 2014

This paper presents an experimental study of the plugging effect on the capacity of open-ended piles installed in sandy soil. Full-scale tests, including dynamic and static axial-compression load tests, were carried out on three instrumented piles with different diameters (508.0, 711.2 and 914.4 mm). To measure the outer and inner shaft resistances acting on the piles, a double-walled system was utilized with instrumented strain gauges on the outside and inside walls of the pile. The results of field tests show that the inner shaft resistance was mostly mobilized at the location between the pile tip and 18-34% of the total plug length. It was found that the soil plugging in the lower portion has influence on the inner shaft resistance. In addition, it can be also demonstrated that the ratio of inner shaft resistance plus annulus load resistance to total resistance decreased with increasing pile diameters. The results of these tests show that the relationship between the degree of plugging and pile diameter is clearly established. Direct observations of the soil plugs were made and used to quantify both the plug length ratio (PLR) and the incremental filling ratio (IFR). Based on this result, it was found that the N value of the standard penetration test (SPT) is highly correlated with the IFR.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.6033-6038
• /
• 2015

Background: Experience of lung cancer includes negative impacts on both physical and psychological health. Pain is one of the negative experiences of lung cancer. Cognitive behavioral therapy techniques are often recommended as treatments for lung cancer pain. The objective of this review was to synthesize the evidence on the effectiveness of cognitive behavioral therapy techniques in treating lung cancer pain. This review considered studies that included lung cancer patients who were required to 1) be at least 18 years old; 2) speak and read English or Thai; 3) have a life expectancy of at least two months; 4) experience daily cancer pain requiring an opioid medication; 5) have a positive response to opioid medication; 6) have "average or usual" pain between 4 and 7 on a scale of 0-10 for the day before the clinic visit or for a typical day; and 7) able to participate in a pain evaluation and treatment program. This review considered studies to examine interventions for use in treatment of pain in lung cancer patients, including: biofeedback, cognitive/attentional distraction, imagery, hypnosis, and meditation. Any randomized controlled trials (RCTs) that examined cognitive behavioral therapy techniques for pain specifically in lung cancer patients were included. In the absence of RCTs, quasi-experimental designs were reviewed for possible conclusion in a narrative summary. Outcome measures were pain intensity before and after cognitive behavioural therapy techniques. The search strategy aimed to find both published and unpublished literature. A three-step search was utilised by using identified keywords and text term. An initial limited search of MEDLINE and CINAHL was undertaken followed by analysis of the text words contained in the title and abstract, and of the index terms used to describe the article. A second search using all the identified keywords and index terms was then undertaken across all included databases. Thirdly, the reference list of all identified reports and articles were searched for additional studies. Searches were conducted during January 1991- March 2014 limited to English and Thai languages with no date restriction. Materials and Methods: All studies that met the inclusion criteria were assessed for methodological quality by three reviewers using a standardized critical appraisal tool from the Joanna Briggs Institute (JBI). Three reviewers extracted data independently, using a standardized data extraction tool from the Joanna Briggs Institute (JBI). Ideally for quantitative data meta-analysis was to be conducted where all results were subject to double data entry. Odds ratios (for categorical data) and weighted mean differences (for continuous data) and their 95% confidence intervals were to be calculated for analysis and heterogeneity was to be assessed using the standard Chi-square. Where statistical pooling was not possible the finding were be presented in narrative form. Results: There were no studies located that met the inclusion requirements of this review. There were also no text and opinion pieces that were specific to cognitive behavioral therapy techniques pain and lung cancer patients.Conclusions: There is currently no evidence available to determine the effectiveness of cognitive behavioural therapy techniques for pain in lung cancer patients.

• The Korean Journal of Pesticide Science
• /
• v.11 no.1
• /
• pp.27-31
• /
• 2007

Trifloxystrobin standard was analyzed by high performance liquid chromatography (HPLC). The recovery of the trifloxystrobin and it's metabolite CGA321113 were $84.6{\sim}95.3%$ and $86.4{\sim}87.3%$ and their detection limits for both of them were 0.04 mg $kg^{-1}$. In case of foliar application in the chinese cabbage (Brassica campestris L. ssp pekinnensis (Lour.) Rupr.), the amount of the residue of trifloxystrobin was above the maximum residue level (temporary MRL, 0.5 mg $kg^{-1}$) when it was treated either two times three to five days before harvest or three times three to seven days before harvest. Whereas in case of drenching the mount of the residue was below the temporary MRL, the residues in the cabbage in both the cases where the recommended amount (150 mL of the solution diluted 1500 times) and double of the amount were treated were 0.16 and 0.31 mg $kg^{-1}$, respectively. In conclusion, it should be safe to apply the trifloxystrobin (22% WP) in the soil of cabbage field abiding by the tentative recommendation level, but for the foliar application it appeared inappropriate.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.115-125
• /
• 2007

Grould Reaction force(GRF) is important in human movements and GRF measurements are one of the most frequently used tool in biomechanical studies. In the studies of the golf swing motion, people refer to GRF as weight transfer. A successful golf swing motion requires many segments activation sequences which are controled by the nerve system. Due to the inter- and intra-individual variability of the human movement and the movement strategies, reliability of the measurements are important in human movement studies. Previous golf researches were based on group studies and certain events' values were analyzed. The purposes of this study were to determine the number of trials for the reliable golf swing GRF data collection, to reveal the variability level of the meaningful components of the golf swing GRF, and to classify the types of the golf swing GRF patterns. Twenty three male professional golfers($26.4{\pm}6.6$ years, $174.3{\pm}5.2\;cm$, $71.3{\pm}6.5\;kg$) signed an informed consent form prior to participation in this study. GRFs of driver swings were collected with Kistler 9285 force platform and 9865A amplifier, and calculated by the KwonGRF program(Visol, Korea). Sampling frequency was 1080 Hz. GRF data were trimmed from 1.5 s prior to the impact to 0.5 s after the impact. The number of trials for the reliable GRF collection was determined when the change in floating mean overs the 25 % of the standard deviation of that variable. Variabilities of the variables were determined by the coefficient of variation(CV) of 10 %. The types of GRF patterns were determined by visual inspection of the peak GRF shapes. The minimum number of trials for the reliable golf swing GRF data collection was five. Ten-trial seems more conservative. The value of the peak GRF was more reliable than the value of the impact GRF. The CV of the peak GRF and impact GRF were 7.4 %, 15.2 %, respectively. Because of the +/- sigh of the peak GRF appearance time, it was impossible to calculate CV of the peak GRF appearance time. Golf swing GRF patterns were classified as sing peak type, double peak type, and plateau peak type. This classification suggests the presence of the different golf swing weight transfer strategies.

• Journal of the Korean Society for Library and Information Science
• /
• v.46 no.4
• /
• pp.169-188
• /
• 2012

This study aimed to analyze the characteristics of the bibliographic description of ISBD Consolidated edition published in 2011 and to grasp the considerations in applying the rules of ISBD consolidated edition to KCR4. For achieving this, the four aspects were analyzed such as the description area and data elements, the resource types, the punctuation, and the order of the elements of ISBD Consolidated edition(2011). The characteristics of ISBD Consolidated edition are as follows. First, the content form and the media type area are added in new 0 area and elements are designated by mandatory to confirm to FRBR. Second, content form, content qualification and media type replaced GMD in title and statement of responsibility area. Third, the prescribed punctuations were retained even when this results in double punctuation, and individual square brackets were preferred than entire square brackets when using square brackets to all elements in same area. Fourth, the order of elements in description was set out by patterns of data elements in areas, therefore could reduce the confusion of the order of elements. ISBD Consolidated edition as an international standard would make various rules to maintain the uniformity, but also respects the bibliographic practices of individual countries. Therefore, each country must revise its own rule to conform the ISBD Consolidated edition as well as reflect its unique situation. In Korea, since KCR4 was developed based on the previous edition of ISBD, it should be revised to confirm to the ISBD Consolidated edition. Therefore, this study is expected to contribute to the revision of KCR4.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.1-8
• /
• 2017

A sandwich panel is a composite material composed of a double-sided noncombustible material and insulation core which is used in the inner, outer walls, and roof structure of a building. Despite its excellent insulation performance, light weight and excellent constructability, a flame is brought into the inside of the panel through the joint between the panels, melting the core easily and causing casualties and property damage due to the rapid spread of flame. The current Building Law provides that the combustion performance of finishing materials for buildings should be determined using a fire test on a small amount of specimen and only a product that passes the stipulated performance standard should be used. This law also provides that in the case of finishing materials used for the outer walls of buildings, only materials that secured noncombustible or quasi-noncombustible performance should be used or flame spread prevention (FSP) should be installed. The purpose of this study was to confirm the difference between the dangers of horizontal and vertical fire spread by applying FSP, which is applied to finishing materials used for the outer walls of buildings limitedly to a sandwich panel building. Therefore, the combustion behavior and effects on the sandwich panel according to the application of FSP were measured through the construction to block the spread of flame between the panels using a full scale fire according to the test method specified in ISO 13784-1 and a metallic structure. The construction of FSP on the joint between the panels delayed the spread of flame inside the panels and the flash over time was also delayed, indicating that it could become an important factor for securing the fire safety of a building constructed using complex materials.

• Research in Plant Disease
• /
• v.20 no.3
• /
• pp.227-233
• /
• 2014

The mixture (MX) of acetic acid (AA) and lactic acid (LA) was examined for its effectiveness in the control of the pine wood nematode Bursaphelenchus xylophilus contaminated in cymbidium culture medium. Nematode mortality in vitro was nearly 100% in AA and MX at the concentrations of 5.0-1.0% (pH 2.6 - 4.2) and in LA only at 5.0% (pH 3.5), but lowered at concentrations of 0.5-0.1% (pH 5.1-6.9) more significantly in LA than AA and MX. MX of most concentrations caused higher nematode mortality than the average response to AA and LA. All treatments of MX (0.5% and 0.25%), fosthiazate (standard and double concentrations) and culture dilution of Paenibacillus polymyxa GBR-1 ($10^7$colony-forming units/ml) reduced significantly the nematode populations in the cymbidium culture medium, compared to non-treatment control, with no significant difference among the treatments. No phytotoxicity occurred in all treatments. pH of the medium with the time after treatment and growths of 2-year-old cymbidium were not significantly different among treatments. Considering the safety and price of the organic acids, use of MX in the processes for culturing cymbidium may be a practically reliable and eco-friendly way in the control of the quarantine nematode in cymbidium.

• Journal of Applied Biological Chemistry
• /
• v.60 no.4
• /
• pp.313-319
• /
• 2017

Strawberries are one of the main commodities in Korea and have been exported over 30 million dollar. And the safety has recently become an important issue in the agro-trade, pesticide residue is most important matter of safe agricultural products. As strawberries can be cultivated using elevated production system, so it is possible to use the drenching. When spraying the pesticides, the use of drenching can be lower amount of residual than using foliar treatment. In this study, time sequential residual amount of pesticides were compared between drenching and foliar application in strawberries. Pesticides were treated with the standard and double dosage and samples were collected at 0, 3, 6, 9, 13, 16 and 21 day and analyzed by LC and LC-MS/MS after liquid-liquid extraction and QuEChERS. Two pesticides were detected less than 1 mg/kg in all samples for drenching treatment. Carbendazim residues in drenching treatment were 5 to 25 times lower than foliar application. And azoxystrobin was not detected in strawberries of drenching treatment.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.350-357
• /
• 2017

Purpose: In-situ monitoring of water quality is fundamental to most environmental applications. The high cost and long delays of conventional laboratory methods used to determine water quality, including on-site sampling and chemical analysis, have limited their use in efficiently managing water sources while preventing environmental pollution. The objective of this study was to develop an on-site water monitoring system consisting mainly of an Arduino board and a sensor array of multiple ion selective electrodes (ISEs) to measure the concentration of $NO_3$ ions. Methods: The developed system includes a combination of three ISEs, double-junction reference electrode, solution container, sampling system consisting of three pumps and solenoid valves, signal processing circuit, and an Arduino board for data acquisition and system control. Prior to each sample measurement, a two-point normalization method was applied for a sensitivity adjustment followed by an offset adjustment to minimize the potential drift that could occur during continuous measurement and standardize the response of multiple electrodes. To investigate its utility in on-site nitrate monitoring, the prototype was tested in a facility where drinking water was collected from a water supply source. Results: Differences in the electric potentials of the $NO_3$ ISEs between 10 and $100mg{\cdot}L^{-1}$ $NO_3$ concentration levels were nearly constant with negative sensitivities of 58 to 62 mV during the period of sample measurement, which is representative of a stable electrode response. The $NO_3$ concentrations determined by the ISEs were almost comparable to those obtained with standard instruments within 15% relative errors. Conclusions: The use of the developed on-site nitrate monitoring system based on automatic sampling and two-point normalization was feasible for detecting abrupt changes in nitrate concentration at various water supply sites, showing a maximum difference of $4.2mg{\cdot}L^{-1}$ from an actual concentration of $14mg{\cdot}L^{-1}$.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.2
• /
• pp.149-155
• /
• 2002

Two pesticides commonly used for lettuce cultivation including chlorpyrifos and procymidone were subjected to a field residue trial to ensure safety of terminal residues in the harvest. After pesticides were applied at standard and double rates in a foliar spray, leaf persistence of their residues was investigated far 10 days prior to harvest. Even though far exceeded the tolerances, initial leaf residues were rapidly dissipated with time and remained only 0.4$\sim$7.2% of the residues in the harvest. As well fitted by the first-order kinetics, biological half-lives of the pesticide residues in lettuce leaves ranged 1.2$\sim$2.6 days. Slow dissipation of the residues in the harvest was observed during storage at room temperature and 4$^{\circ}C$ for 7 days. Portions of dislodgeable residues which resided in detergent washings decreased as time elapsed. Patterns in dissipation and distribution of dislodgeable residues were not largely affected by the application rate of pesticides. It is concluded that timing of pesticide application, that is, pre-harvest interval would be the first factor to determine the terminal residue level in edible portions of lettuce.