• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.78-91
• /
• 2024

Double steel plate concrete composite shear wall (SCSW) has been widely utilized in nuclear power plants and high-rise structures, and its shear connectors have a substantial impact on the seismic performance of SCSW. Therefore, in this study, the mechanical properties of SCSW with angle stiffening ribs as shear connections were parametrically examined for the reactor containment structure of nuclear power plants. The axial compression ratio of the SCSW, the spacing of the angle stiffening rib arrangement and the thickness of the angle stiffening rib steel plate were selected as the study parameters. Four finite element models were constructed by using the finite element program named ABAQUS to verify the experimental results of our team, and 13 finite element models were established to investigate the selected three parameters. Thus, the shear capacity, deformation capacity, ductility and energy dissipation capacity of SCSW were determined. The research results show that: compared with studs, using stiffened ribs as shear connectors can significantly enhance the mechanical properties of SCSW; When the axial compression ratio is 0.3-0.4, the seismic performance of SCSW can be maximized; with the lowering of stiffener gap, the shear bearing capacity is greatly enhanced, and when the gap is lowered to a specific distance, the shear bearing capacity has no major affect; in addition, increasing the thickness of stiffeners can significantly increase the shear capacity, ductility and energy dissipation capacity of SCSW. With the rise in the thickness of angle stiffening ribs, the improvement rate of each mechanical property index slows down. Finally, the shear bearing capacity calculation formula of SCSW with angle stiffening ribs as shear connectors is derived. The average error between the theoretical calculation formula and the finite element calculation results is 8% demonstrating that the theoretical formula is reliable. This study can provide reference for the design of SCSW.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.63-73
• /
• 2006

Numbers of postulations lie on the difference of integumental changes with two major surgical remedies of one jaw vs. two jaw surgery in skeletal Class III malocclusion. Accordingly it was the aim of the study to elucidate the skeletal profile changes with an accompanying disposition of soft tissues, consequently to yield the correlation and ratio of soft tissue changes with two types of surgical procedures, which in turn make it possible to predict the soft tissue outcomes by means of assembled regression equations. Cephalometric headfilms of fifty two adult skeletal Class III comprised of 26 maxillary advancement by Le Fort I osteotomy and mandibular setback by sagittal split ramus osteotomy simultaneously (double jaw surgery, group A), 26 mandibular setback alone (one jaw surgery, group B) were statistically analyzed. Group A manifested 72.4% soft tissue advancement to skeletal changes in the upper lip area, while group B appeared to have no statistically significant changes. The nasolabial angle showed more increment in group A than in group B, whereas the mentolabial angle illustrated more reduction in group B. The backward movement of soft tissue pogonion to skeletal change revealed 98% in group A, and 109% in group B. The double jaw surgery group characteristically revealed remarkable integ umental change in the upper lip area, while the one jaw surgery had major effects in the lower lip and soft tissue pogonion areas.

• Journal of Korean Dental Hygiene Science
• /
• v.7 no.1
• /
• pp.29-37
• /
• 2024

Background: This study investigatedthe factors influencing the degree of education in the Department of Dental Hygiene at K University on the degree of education required for a convergence major related to the medical device industry. Methods: For 5 days from December 5, 2023, 257 students of the Department of Dental Hygiene at a university in Wonju Citywere surveyed, and an online survey was conducted. General characteristics, school satisfaction, satisfaction with majors, perceptions of multi-majors in universities, and the degree of demand for a convergence major related to the medical device industry were examined. Since normality was not satisfied, non-parametric analysis was performed. To confirm the differences in convergence major related to medical device industry education needs according to general characteristics, the Mann-Whitney U test and Kruskal-Wallis test were performed. Post-hoc analysis was performed, and the median, minimum, and maximum values were presented. Multiple regression analysis was performed to confirm the effect on the demand for a convergence major related to the medical device industry, and the statistical significance probability was set at 0.05. Results: As a result of examining the factors affecting the demand for a convergence major related to the medical device industry, it was found that the more experience one has in completing a double major in college (p<0.05) and the higher the degree of satisfaction with the major (p<0.05), the statistically significant need for an interdisciplinary major was higher(p<0.05).

• Journal of the Korean Society of Food Culture
• /
• v.16 no.3
• /
• pp.235-242
• /
• 2001

Chemical properties of the different parts of watercress(Oenanthe javanica D.C.) grown and harvested from the culture fields under different cultivating methods were studied. In proximate analyses of watercress in parts, moisture contained more in stem than in root or in leaf, but crude protein and crude lipid contents were lower in stem than in root or in leaf. Crude ash in root contained up to about double amount in leaf or stem. Major mineral elements detected in watercress were Fe, Mg, Ca, and K, and their contents in root was higher than those in stem or leaf. Especially, Fe in root was significantly higher than that in stem or in leaf. Total free sugar composed mainly with fructose and glucose, was the highest in watercress from Hwasoon and followed the watercress from Jeonju and Donggok in order. Free sugar content was highest in leaf and the lowest in root. Major water-soluble vitamins were vitamin C, thiamin and biotin and the content of vitamin C was higher than others. These vitamins contained more in leaf than in stem or root. Niacin contained 6.09 mg/100 g in leaf of watercress from Hwasoon, which was much higher than others, but it was not detected in stem of watercress from Jeonju. Organic acids detected were oxalic acid, citric acid and malic acid and other 12 organic acids were not detected. In fatty acid composition, there were significant differences among watercresses from different parts and different culture fields. Linoleic acid, linolenic acid and palmitic acid were major fatty acids contained in watercress and it took about 80% of the total content. Amino acid content in leaf was higher than that in root and in stem. Glutamic acid and proline were major amino acids in stem of watercress from Jeonju and in stem of watercresses from Hwasoon and Donggok, respectively. In leaves of all three watercresses glutamic acid content was the highest.

• The Journal of Korean Society of Virology
• /
• v.26 no.2
• /
• pp.151-162
• /
• 1996

Pseudorabies is caused by Pseudorabies virus (PRV: Aujeszky's disease virus) of Herpesviridae that is characterized by 100 to 150nm in size with a linear double-stranded DNA molecule with of approximately $90{\times}10^6Da$. This disease affects most of domestic animals such as swine, cattle, dog, sheep, cat, chicken, etc. causing high mortality and economic losses. In swine, young piglets show high mortality and pregnant sows, reproductive failures. However the adult swine reveals no clinical signs in general. But they become a carrier state and play an important role for propagation of the disease. In this study, the nucleotide sequence of major casid protein gene of PRV, Yangsan strain isolated from the diseased swine in Korea was analyzed, and the recombinant MCP was produced by expression of the MCP gene in Sf-9 cell using baculovirus transfer vector system. As result, in BamHI digestion, MCP gene locus of PRV YS strain showed different from that of Indiana S strain. The patterns of enzyme mapping were also found to be unidentical each other. The sequence of the MCP gene partially analyzed showed 98.09% identity to Indiana S strain. The expression of MCP in Sf-9 cell cotransfected by pVLMCP-44 baculovirus expression vector was characterized by Southern blot hybridization, immunofluoresent and immunocytochemical tests, SDS-PAGE and Western blotting. The rMCP with M.W. 142kDa was most effectively expressed in Sf-9 cells at the 3-4th days post inoculation of the recombinant baculovirus by 2 moi.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.330-335
• /
• 1987

This study was carried out to know the effect of seed position on the size, contents of ginsenosides, free sugars, and fatty acids in ginseng seeds. Seed positions were classified by the three portions as center, middle and border in a seed cluster. Seed weight at center was light remarkably in comparison with those of seeds of at border and middle. The weight of embryo plus endosperm was in same tendency as seed weight. Percentage of single-seeded berry was smaller than that of the double-seeded, and the triple-seeded was rare. The percentage of the single-seeded increased from the border to the center. Size of the single -seeded seed was smaller than that of the double- seeded. Rate of dehiscence did not differ among different seed positions. The major ginsenosides in seed were Re, Rb$_1$, and Rb$_2$. The contents of Rb$_2$ and total saponin were highest in border, least in center, but reversed in Re and Rd. Major free sugars in seed were sucrose and glucose. The sucrose content was gradually decreased according to the seed position from border to center. Major fatty acids in the seed were oleic and linoleic acid. Contents of palmitic and linolenic acid were different according to the seed position.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2016

In this paper, the compact CPW-fed slot antenna for WLAN applications is proposed. While the proposed antenna with size of only $20{\times}18{\times}1mm^3$ is consisted of double stub and folded slot, the antenna for 2.4 GHz band and 5 GHz band is designed and fabricated with optimized parameters obtained by simulation. Proposed antenna is fabricated with FR-4 substrate to the thickness of 1.0 mm. By obtaining the measured return loss level of < -10 dB at dual-band, we showed that it is operated as antenna for WLAN applications, and then it is also expected to be usable as antenna for RFID.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.9
• /
• pp.1629-1635
• /
• 2016

A novel bacteriophage, PBES 02, infecting Cronobacter sakazakii was isolated and characterized. It has a spherical head of 90 nm in diameter and a tail of 130 nm in length, and belongs to Myoviridae as observed under a transmission electron microscope. The major virion protein appears to be 38 kilodaltons (kDa) in size. The latent period of PBES 02 is 30 min and the burst size is 250. Infectivity of the phage remained intact after exposure to temperatures ranging from 4℃ to 55℃ for 1 h. It was also stable after exposure to pHs ranging from 6 to 10 for 1 h. The phage effectively removed contaminating Cronobacter sakazakii from broth infant formula. PBES 02 has a double-stranded DNA genome of 149,732 bases. Its GC ratio is 50.7%. Sequence analysis revealed that PBES 02 has 299 open reading frames (ORFs) and 14 tRNA genes. Thirty-nine ORFs were annotated, including 24 related to replication and regulation functions, 10 related to structural proteins, and 5 related to DNA packaging. The genome of PBES 02 is closely related to that of two other C. sakazakii phages, CR3 and CR8. Comparison of DNA sequences of genes encoding the major capsid protein revealed a wide geographical distribution of related phages over Asia, Europe, and America.

• Transactions of Materials Processing
• /
• v.14 no.9 s.81
• /
• pp.798-803
• /
• 2005

In this paper, the six sigma scheme together with the rigid-viscoplastic finite element method is employed to obtain the optimal metal flow lines of a hot forging according to the six sigma processes, i.e., five steps such as define, measure, analyze, improve and control. Each step is investigated in detail to meet customer's requirements through improvement of product quality. A forging simulator is used for analysis of the metal flow lines of the hot forging, manufactured by a hot press forging machine, under various conditions of major factors determined at each step. The analyzed results are examined in order to reveal the effects of major factors on the metal flow lines and the formed shapes. The effects are then used to find an optimal process and the optimal process with die is devised and tested. The comparison between the required metal flow lines and the experiments shows that the approach is effective for optimal process design in hot forging considering metal flow lines.

• ALGAE
• /
• v.18 no.3
• /
• pp.191-197
• /
• 2003

Histones are important proteins that interact with the DNA double helix to form nucleosome. Two putative histone genes, GjH2A-1 and GjH2A-2 were isolated from a red alga Griffithsia japonica. The putative open reading frame of GjH2A-1 and GjH2A-2 shared high similarity with the previously reported amino acid sequences of histone H2As. They have a motif consisting of seven amino acids A-G-L-Q-F-P-V, which matches the histone H2A motif [AC]-G-L-x-F-P-V. Phylogenetic trees were constructed from amino acid sequences of 38 histone H2As. The histone H2As were divided into two groups: major H2As and H2A.F/Z variants. The major histone H2A group consisted of animals, fungi, plants + green algae, and red algae H2A subgroups. The animal histone H2A subgroup was divided into vertebrates, echinoderms, nematodes, insects, and segmented worms H2As. The putative red algal histone genes, GjH2A-1 and GjH2A-2, constituted an independent lineage. This is the first report on red algal histone genes.