• 제목/요약/키워드: Double Frequency Method

검색결과 261건 처리시간 0.025초

이중밴드 히스테리시스 전류 제어 방식 (A Double Band Hysteresis Current Control Method)

  • 오원현;유창훈;신은철;박성민;노학엽;유지윤
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
    • /
    • pp.579-583
    • /
    • 2003
  • Hysteresis controllers are intrinsically robust to system parameters, exhibit very high dynamic response and are suitable for simple implementation. But the current control using a conventional hysteresis controller has the disadvantage that high switching frequency may happen due to lack of coordination among individual hysteresis controllers of three phases. This will of course increase the switching loss. In addition, the current error is not strictly limited. So, in this paper to reduce the switching frequency, a double band hysteresis current controller is proposed. The presented control system was tested with digital simulation in the Borland C++ program and demonstrate the advantage of proposed hysteresis current controller.

  • PDF

복 공진형 고주파 인버터의 특성해석과 설계 (Design and characteristics analysis of Double resonant type High frequency Inverter using Phasor shift)

  • 김종해;원재선;김동희;조규판;심광열;이봉섭
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 F
    • /
    • pp.2100-2102
    • /
    • 1998
  • A full bridge double resonant type inverter using Phasor shift suitable for heating magnetic and nonmagnetic at high frequency is described. A series-parallel arrangement of capacitor is adopted and optimum mode of operation is proposed. Also, Based on the characteristics value, a method of circuit design is proposed.

  • PDF

DGS 구조를 이용한 DPDT 스위치 설계에 관한 연구 (A Study for DPDT Switch Design with Defected Ground Structure)

  • 안가람;정명섭;임재봉;조홍구;박준석
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제54권3호
    • /
    • pp.132-138
    • /
    • 2005
  • In this paper a DPDT(Double-Pole Double Through) switch with defected ground structure(DGS) is proposed. The equivalent circuit for the proposed switch structure is derived according to based on equivalent circuit of proposed DGS unit structure. The equivalent circuit parameters of DGS unit are extracted by using the circuit analysis method. The on/off operation of the proposed switch is obtained by varying the capacitance of the varactor diode at the defected ground plane. In the case of ON state, the insertion loss of the fabricated DPDT was shown under 1dB. And in OFF state, we found the rejection characteristic over 20dB at the designed frequency 2.45GHz. The experimental results show excellent insertion loss at on state and isolation at off state.

동시 이중주파수 구동을 이용한 유도가열용 인버터 (Inverter for Induction Heating using Simultaneous Dual-Frequency Method)

  • 신우석;박희창
    • 전력전자학회논문지
    • /
    • 제16권6호
    • /
    • pp.554-560
    • /
    • 2011
  • 단일 주파수로 유도가열에 의한 표면 경화 열처리 공정에서 생기는 설비의 이중 투자 문제 및 열처리 공정시간을 단축할 수 있도록 하기 위해 하나의 공정에서 두가지 공정을 동시에 처리할 수 있도록 해주는 동시 이중 주파수(Simultaneous dual frequency: SDF) 구동기법 기술에 대해 설명한다. 본 논문에서는 듀얼 방식의 인버터를 제안하여 이중 주파수(Dual frequency) 구동기법을 구현하였으며 시뮬레이션과 실험을 통해 제안된 인버터의 이중 주파수제어 및 전력제어를 검증하였다.

무선전력전송의 효율에 영향 미치는 안테나 구조와 주파수 효과 (The Effects of Antenna Type and Frequency on Wireless Power Transmission)

  • 김응수
    • 한국멀티미디어학회논문지
    • /
    • 제18권4호
    • /
    • pp.541-545
    • /
    • 2015
  • Wireless power transmission which can transmit the electrical power through the air is the promise technology. In this paper, the effects of wireless power transmission using magnetic resonance method have been studied on coil material, resonance frequency, and antenna type. We have found copper tube as a coil material had the better characteristics than that of enameled wire, and the optimal resonance frequency was 13.6MHz in the range of from 1MHz to 20MHz. And the double square spiral type antenna as a load coil was the best. The power transmission distance by magnetic resonance method with 13.6MHz was 150 cm.

이중저 형상 구조물의 음향방사효율과 수중방사소음 해석 (Analysis of Acoustic Radiation Efficiency and Underwater Radiated Noise of Double Bottom-shaped Structure)

  • 최성원;김국현;조대승;서규열
    • 대한조선학회논문집
    • /
    • 제49권2호
    • /
    • pp.158-163
    • /
    • 2012
  • Recently, reducing underwater radiated noise (URN) of ships has become an environmental issue to protect marine wildlife. URN of ships can be predicted by various methods considering its generating mechanism and frequency ranges. For URN prediction due to ship structural vibration in low frequency range, the fluid-structure interaction analysis technique based on finite element and boundary element methods (FE/BEM) is regarded as an useful technique. In this paper, URN due to a double bottom-shaped structure vibration has been numerically investigated based on a coupled method of FE/BEM to enhance the prediction accuracy of URN due to the vibration of real ship engine room structure. Acoustic radiation efficiency and URN transfer function in case of vertical harmonic excitation on the top plate of double bottom structure have been evaluated. Using the results, the validity of an existing empirical formula for acoustic radiation efficiency estimation and a simple URN transfer function, which are usually adopted for URN assessment in initial design stage, is discussed.

Stability analysis in BWRs with double subdiffusion effects: Reduced order fractional model (DS-F-ROM)

  • Gilberto Espinosa-Paredes;Ricardo I. Cazares-Ramirez;Vishwesh A. Vyawahare;Erick-G. Espinosa-Martinez
    • Nuclear Engineering and Technology
    • /
    • 제56권4호
    • /
    • pp.1296-1309
    • /
    • 2024
  • The aim of this work is to explore the effect of the double subdiffusion on the stability in BWRs. A BWR novel reduced order model with double subdiffusion effects: reduced order fractional model (DS-F-ROM) to describe the neutron and heat transfer processes was proposed for this study. The double subdiffusion was developed with a fractional-order two-equation model, and with different fractional-orders and relaxation times. The stability analysis was carried out using the root-locus method and change from the s to the W domain and were confirmed using the time-domain evolution of neutron flux for a unit step change in reactivity. The results obtained using the reduced fractional-order model are presented for different anomalous diffusion coefficient values. Results are compared with normal diffusion and P1 equations, which are obtained straightforwardly with DS-ROM when relaxation time tends to zero, and when the anomalous diffusion coefficient tends to one, respectively.

Free vibration analysis of double walled carbon nanotubes embedded in an elastic medium with initial imperfection

  • Ehyaei, Javad;Daman, Mohsen
    • Advances in nano research
    • /
    • 제5권2호
    • /
    • pp.179-192
    • /
    • 2017
  • The transverse vibration of double walled carbon nanotube (DWCNT) embedded in elastic medium with an initial imperfection is considered. In this paper, Timoshenko beam theory is employed. However the nonlocal theory is used for modeling the nano scale of nanotube. In addition, the governing Equations of motion are obtained utilizing the Hamilton's principle and simply-simply boundary conditions are assumed. Furthermore, the Navier method is used for determining the natural frequencies of DWCNT. Hence, some parameters such as nonlocality, curvature amplitude, Winkler and Pasternak elastic foundations and length of the curved DWCNT are analyzed and discussed. The results show that, the curvature amplitude causes to increase natural frequency. However, nonlocal coefficient and elastic foundations have important role in vibration behavior of DWCNT with imperfection.

Double-Objective Finite Control Set Model-Free Predictive Control with DSVM for PMSM Drives

  • Zhao, Beishi;Li, Hongmei;Mao, Jingkui
    • Journal of Power Electronics
    • /
    • 제19권1호
    • /
    • pp.168-178
    • /
    • 2019
  • Discrete space vector modulation (DSVM) is an effective method to improve the steady-state performance of the finite control set predictive control for permanent magnet synchronous motor drive systems. However, it requires complex computations due to the presence of numerous virtual voltage vectors. This paper proposes an improved finite control set model-free predictive control using DSVM to reduce the computational burden. First, model-free deadbeat current control is used to generate the reference voltage vector. Then, based on the principle that the voltage vector closest to the reference voltage vector minimizes the cost function, the optimal voltage vector is obtained in an effective way which avoids evaluation of the cost function. Additionally, in order to implement double-objective control, a two-level decisional cost function is designed to sequentially reduce the stator currents tracking error and the inverter switching frequency. The effectiveness of the proposed control is validated based on experimental tests.

Aerodynamic and hydrodynamic force simulation for the dynamics of double-pendulum articulated offshore tower

  • Zaheer, Mohd Moonis;Islam, Nazrul
    • Wind and Structures
    • /
    • 제32권4호
    • /
    • pp.341-354
    • /
    • 2021
  • Articulated towers are one of the class of compliant offshore structures that freely oscillates with wind and waves, as they are designed to have low natural frequency than ocean waves. The present study deals with the dynamic response of a double-pendulum articulated tower under hydrodynamic and aerodynamic loads. The wind field is simulated by two approaches, namely, single-point and multiple-point. Nonlinearities such as instantaneous tower orientation, variable added mass, fluctuating buoyancy, and geometrical nonlinearities are duly considered in the analysis. Hamilton's principle is used to derive the nonlinear equations of motion (EOM). The EOM is solved in the time domain by using the Wilson-θ method. The maximum, minimum, mean, and standard deviation and salient power spectral density functions (PSDF) of deck displacement, bending moment, and central hinge shear are drawn for high and moderate sea states. The outcome of the analyses shows that tower response under multiple-point wind-field simulation results in lower responses when compared to that of single-point simulation.