• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.1051-1065
• /
• 2020

Safety analysis of nuclear power plant (NPP) especially in accident conditions is a basic and necessary issue for applications and commercialization of reactors. Many previous researches and development works have been conducted. However, most achievements focused on the safety reliability of primary pressure system vessels. Few literatures studied the structural safety of huge concrete structures surrounding primary pressure system, especially for the fourth generation NPP which allows existing of through cracks. In this paper, structural safety reliability of concrete structures of HTR-PM in accidental double-ended break of hot gas ducts was studied by Exceedance Probability Method. It was calculated by Monte Carlo approaches applying numerical simulations by Abaqus. Damage parameters were proposed and used to define the property of concrete, which can perfectly describe the crack state of concrete structures. Calculation results indicated that functional failure determined by deterministic safety analysis was decided by the crack resistance capability of containment buildings, whereas the bearing capacity of concrete structures possess a high safety margin. The failure probability of concrete structures during an accident of double-ended break of hot gas ducts will be 31.18%. Adding the consideration the contingency occurrence probability of the accident, probability of functional failure is sufficiently low.

• 전자공학회논문지
• /
• 제53권9호
• /
• pp.54-61
• /
• 2016

본 논문에서는 6 Gbps 고속 double data rate(DDR) 인터페이스를 위한 기준 전압 발생기와 선형 등화기를 포함하는 단일 종단 수신기를 제안한다. 제안하는 단일 종단 수신기는 낮은 전압 레벨의 입력 신호에 대해 전압 이득을 증가시키기 위해 공통 게이트 증폭기를 사용한다. 저주파의 이득을 줄이고 고주파 피킹 이득을 발생시키는 연속 시간 선형 등화기가 공통 게이트 증폭기에서의 구현을 위해 제안된다. 또한, 공통 게이트 증폭기의 오프셋 노이즈를 줄임으로 전압이득을 극대화하기 위해 기준 전압 발생기가 구현된다. 제안하는 기준 전압 발생기는 디지털 평준화 기법에 의해 2.1 mV의 해상도로 제어된다. 제안된 단일 종단 수신기는 공급전압 1.2 V의 65 nm CMOS 공정에서 설계되었으며 6 Gbps의 동작속도에서 15 mW의 전력을 소모한다. 설계된 등화기는 저주파에서의 이득 대비 3 GHz 주파수에서의 피킹 이득을 5 dB 이상 증가시킨다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.13-14
• /
• 2013

Multiple output converters (MOCs) are widely used for applications which require various kinds of the output voltages due to its advantages in cost, volume, and efficiency. However, most of the MOCs developed so far can regulate only one output tightly and require as many secondary windings in the transformer as the number of the outputs. In this paper, a novel Time Division Multiple Control (TDMC) method to regulate all the outputs in high precision is proposed and applied to the double ended forward converter for the multiple battery charger. Additional benefit of the proposed topology is to require only one secondary winding in the transformer for all the outputs. The proposed converter can charge two different kinds of batteries or same kind of batteries in different state of charges (SOCs) by CC/CV mode independently with the even degree of tight regulation, thereby satisfying the ripple requirements for each battery.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1522-1530
• /
• 2008

This paper presents a discrete wavelet analysis based algorithm to address the fault impedance calculation under transient state in radial power distribution networks. The fault impedances have been derived under different fault conditions. Furthermore, a recursive fault distance estimation method is proposed utilizing the measured fault impedance and power line parameters. The proposed scheme can resolve the errors caused by the non-homogeneous power lines, the presence of lateral loads since, the fault impedance will always be updated with the recursive form. For the verification of the proposed scheme, a filed test has been peformed with varying fault resistances in the 22.9(kV) radial system. Power meters and fault locators were installed at the substation. It was figured out that the performance of the discrete wavelet and the recursive scheme are very good even for high fault resistance condition.

• 해양환경안전학회지
• /
• 제21권6호
• /
• pp.729-736
• /
• 2015

본 논문에서는 Goal-Driven Optimization(GDO)을 바탕으로 한 양방향 차도선의 차량갑판의 구조설계에 대하여 최적화를 수행하였다. 차량갑판의 강도와 변형에 대한 영향을 검토하여 경제적 비용을 절약할 수 있는 최적점을 결정하였다. 실험계획법(DOE)과 반응표면법을 바탕으로 한 갑판두께를 110% 증가시켜 차량갑판의 강도와 강성을 높일 수 있었다. 이 결과에 대한 회귀분석을 수행하여 3차 다항식 모형인 최적 회귀모형식으로 제안하며 결정계수 $R^2$ 0.98정도로 나타내어 신뢰성을 확보할 수 있었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.225-230
• /
• 2000

This paper describes a double-ended current fed push-pull type high frequency resonant inverter used as the power supply for wax-sealing. The proposed inverter can realize ZVS operation by using resonant capacitor to ZVS capacitor and has some merits not only reduction of switch current distribution but also extension of load range compare to the conventional single-ended current fed push-pull type high frequency resonant inverter. This analysis of proposed circuit uses normalized parameter ad characteristic estimation which is needed in each step before design is generally described according to normalized frequency($\mu$), normalized resistance(λ) and parameters. It is also presented as an example of method of the circuit design based on estimation analysis values from theoretical analysis. The theoretical analysis is proved through experiment and this circuit shows that it can be used practically as the power supply system for wax-sealing and DC-DC converter.

• 한국유기농업학회지
• /
• 제28권3호
• /
• pp.273-288
• /
• 2020

The purpose of this study is to estimate farmers' willingness to accept (WTA) of direct payment for increasing public benefit using the contingent valuation method. The double-bounded dichotomous choice and the open-ended question were used to measure WTAs for basic form and optional form, respectively. The results show that WTA for basic form was inversely proportional to the acreage. WTAs were KRW 1,694,001 with 2 ha or less, KRW 1,617,789 with over 2 ha~6 ha, and KRW 1,562,977 with over 6 ha. The results also indicate that WTAs for optional form are similar to payments of agricultural environmental conservation program except physical (chemical) control of pests and weed. The results of this study can provide useful information for the establishment of direct payment for increasing public benefit.

• 한국콘텐츠학회논문지
• /
• 제17권3호
• /
• pp.532-541
• /
• 2017

디자인은 기업의 생존과 발전에 매우 중요한 핵심요소이며, 특히 어린이 디자인은 산업적 측면뿐만 아니라 어린이의 신체적 지적 정서적 성장과 발달에 도움을 주는 핵심요소 중 하나라고 할 수 있다. 이와 같은 어린이 디자인 교육을 위한 어린이 공공디자인 시설의 건립에 따른 경제적 가치를 측정하기 위하여 본 연구에서는 조건부가치측정법(CVM)을 사용하였다. 본 연구는 이용가치와 비이용가치가 모두 높은 어린이 공공디자인 시설을 대상으로 이용에 따른 경제적 가치 측정을 통해 정책결정자에게 유용한 정보를 제공하고자 한다. 이를 위하여 본 연구에서는 개방형 질문과 이중 양분선택 방식을 사용한 조건부가치측정법을 사용하였다. 50명의 개방형 질문방식을 이용한 사전조사와 530명의 이중 양분선택 방식을 이용한 본조사의 분석결과 일인당 연평균 지불의사금액은 약 12,463원으로 추정되었다. 전국 총 가구를 대상으로 한 총편익은 연간 약 2,190억 원으로 추정되었다.

• Journal of Mechanical Science and Technology
• /
• 제14권2호
• /
• pp.215-225
• /
• 2000

The structural integrity of the fuel test loop (FTL) in a Korean experimental reactor is evaluated when the FTL, submerged in a water environment, is subjected to a postulated pipe rupture. The analyses are performed under static and dynamic conditions, imposing the thrust force history at each postulated pipe rupture section. Through analysis the following results are found: l) A double ended guillotine can not be expected based on the toughness of the material, 2) the structural integrity of the chimney surrounding the FTL would not impede the structural integrity by the pipe whip. All analyses are performed by finite element methods.

• 수산해양기술연구
• /
• 제46권3호
• /
• pp.265-275
• /
• 2010

The main purpose of this study is to estimate willingness to pay (WTP) by the general publics, assuming that they pay tax or charge for protecting marine living resources and environment through developing and supplying biodegradable fishing nets. This study employed a contingent valuation method (CVM) which is an econometric method. The survey was conducted by using both double-bounded dichotomous choice and open-ended survey. Tobit model was used for the analysis. The variables included concerns about marine environment and fishing net discarded, sex, age profile, number of family members, educational level and personal disposable income. Annual average WTP per family for the biodegradable fishing net development and supply was estimated at 5,294 won and national WTP amounted to some 84.2 billion won. This includes both of use and non-use value of biodegradable fishing nets.