• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.11
• /
• pp.810-819
• /
• 2006

This paper proposes an Adaptive Double Buffer Model. As a new FIFO buffer model, this technique minimizes packet losses from network congestion by logically managing buffers. It allocates the spare spaces of non-congested buffers to congested buffers by allowing receive/send buffers to share two queues, and hence it minimizes packet losses. In contrast to the buffer model utilizing a free list, this buffer model can prevent the bubble phenomenon caused by a memory leak and thereby apply to a network buffer in a restricted environment. Also, compared with the model using an way, this model brings maximum 100 percent improvement in accepting packets and compared with the model utilizing a free list, this model has the similar efficiency Results of the performance test on Adaptive Double Buffer Model, shows that this proposed model decreases packet losses and enhances memory efficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.152-153
• /
• 2006

The new approach to buffer layer design for CIGS solar cells that permitted to reduce the buffer absorption losses in the short wavelength range and to overcome the disadvantages inherent to Cd-free CIGS solar cells was proposed. A chemical bath deposition method has been used to produce a high duality buffer layer that comprises thin film of CdS and Zn-based film. The double layer was grown on either ITO or CIGS substrates and its morphological, structural and optical properties were characterized. The Zn-based film was described as the ternary compound $ZnS_x(OH)_y$. The composition of the $ZnS_x(OH)_y$ layer was not uniform throughout its thickness. $ZnS_x(OH)_y$/CdS/substrate region was a highly intermixed region with gradually changing composition. The short wavelength cut-off of double layer was shifted to shorter wavelength (400nm) compared to that (520 nm) for the standard CdS by optimization of the double buffer design. The results show the way to improve the light energy collection efficiency of the nearly cadmium-free CIGS-based solar cells.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.684-693
• /
• 2011

Measurement time delay in the transfer alignment is very important. It has been well known that the time delay degrades the alignment performance and makes some navigation errors on the transfer alignment of slave INS(SINS). Therefore there are many schemes to eliminate that time delay but the compensation technique through the estimation by Kalman filter through modeling the time delay as a random constant is generally used. In the case of change over measurement time delay or the large measurement time delay, estimation performance in the existing compensation technique is degraded because model of time delay is not correct any more. In this paper, we propose the method to keep the time delay almost constant even though in the abnormal communication state and very small through feedback compensation using double buffer. Double buffer consists of two moving window to temporarily store measurements from master INS and slave INS in real time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.3
• /
• pp.280-288
• /
• 1988

Lime requirement determination methods were experimentally compared and evaluated for the soils with different physico-chemical properties. The selected soils were mainly distributed in paddy field of Kangweon-Province; Anmi series from limestone region, Dongsong series from basalt region, Gyuam and Gangseo series from alluvial soil. The results were as follows: 1. Differences of soil lime requirement among seven methods ($CaCO_3$ incubation method, $BaCl_2$-TEA method, SMP-single buffer method, Double buffer method, Adams and Evans method, SMP-double buffer method, and O. R. D. method) were remarkably appeared. 2. Measuring lime values by $CaCO_3$ incubation method which is fixed on the basis of lime requirement, SMP-double buffer method was most acceptable for selected soils except Gyuam series, while $BaCl_2$-TEA method showed the highest value, and O. R. D. method was the lowest. 3. Exchangeable Al content of soils was neutralixed near to 70%, but 30% of extractable reached to neutralize when incubated with 100% lime equivalence. 4. Lime requirements based on exchangeable and extractable Al contents of soils were lower than that of $CaCO_3$ incubation method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1069-1074
• /
• 2022

In this study, we prepared ITO thin films on the Nb₂O₅/SiO₂ double buffer layer and investigated electrical and optical properties according to the change of SiO₂ buffer layer thickness (40~50nm). The ITO thin film fabricated on the Nb₂O₅/SiO₂ double buffer layer exhibited a broad surface roughness with a small value ranging of 0.815 to 1.181nm, and the sheet resistance was 99.3 to 134.0Ω/sq. It seems that there is no problem in applying the ITO thin film to a capacitive touch screen panel. In particular, the average transmittance in the short-wavelength (400~500nm) region and the chromaticity (b^*) of the ITO thin film deposited on the Nb₂O₅(10nm)/SiO₂(40nm) double buffer layer showed significantly improved results as 83.58% and 0.05, respectively, compared to 74.46% and 4.28 of ITO thin film without double buffer layer. As a result, it was confirmed that optical properties such as transmittance in the short-wavelength region and chromaticity were remarkably improved due to the index matching effect in the ITO thin film with the Nb₂O₅/SiO₂ double buffer layer.

• The Journal of the Korea Contents Association
• /
• v.5 no.5
• /
• pp.248-254
• /
• 2005

The existing buffer management scheme is caused by with burstness characteristic of the TCP traffic and with only the transmission which is not loss it provides the smallest transmission rate guarantee where the GFR demands and a fair characteristic. In order to provide a high fair characteristic from the dissertation which it sees with the smallest transmission rate guarantee where the GFR demands it proposed the existing buffer algorithm which applies a Fuzzy mechanism in the existing buffer management technique. The proposed algorithm decides a packet disuse used by three parameters which are composed of tagging information, the buffer usage, and the load of VC. Simulation results shows that the fairness and goodput of the proposed algorithm were excellent where the size of MCR will become larger, from the switch the Double-EPD or the DFBA was visible a similar efficiency even from size change of the buffer. The algorithm which is proposed provides a good throughput and a fair characteristic.

• The KIPS Transactions:PartC
• /
• v.10C no.3
• /
• pp.305-310
• /
• 2003

The performance of various GFR implementations has been recently studied due to the interest to provide bandwidth guarantees with a simpler implementation than ABR in ATM networks. One of the important factors is buffer management for guaranteeing QoS in GFR service. An efficient buffer management algorithm is necessary to guarantee MCR for untagged cell in ATM switch. In this paper, we propose and evaluate a buffer management scheme to provide the GFR service guarantees. The proposed scheme can control the cell discarding for fairness in each VC, and compared with Double-EPD and DFBA. Our results show that the proposed buffer management with per-VC queuing achieves significant enhancement on goodputs and fairness index than those of existing methods.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.959-962
• /
• 2000

We have fabricated good quality superconducting YBa$_2$Cu$_3$$O_{7-x}$(YBCO) thin films on Hastelloy(Ni-Cr-Mo alloys) metallic substrates with CeO$_2$and BaTiO$_3$buffer layers in-situ by pulsed laser deposition in a multi-target processing chamber. YBCO film with CeO$_2$single buffer layer shows T$_{c}$ of 71.64 K and the grain size less than 0.1${\mu}{\textrm}{m}$. When BaTiO$_3$ is used as a single buffer layer, the grain size of YBCO is observed to be larger than that of YBCO/CeO$_2$by 200 times and the transition temperature of the film is enhanced to be about 84 K. CeO$_2$/BaTiO$_3$double buffer layer has been adopted to enhance the superconducting properties, which results in the enhancement of the critical temperature and the critical current density to be about 85 K and 8.4$\times$10$^4$ A/$\textrm{cm}^2$ at 77 K, respectively mainly due to the enlargement of the grain size of YBCO film.ilm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.790-793
• /
• 2000

We have fabricated good quality superconducting YBa$_2$Cu$_3$$O_{7-x}$(YBCO) thin films on Hastelloy(Ni-Cr-Mo alloys) metallic substrates with CeO$_2$and BaTiO$_3$buffer layers in-situ by pulsed laser deposition in a multi-target processing chamber. YBCO film with CeO$_2$ single buffer layer shows T$_{c}$ of 71.64 K and the grain size less than 0.1 ${\mu}{\textrm}{m}$. When BaTiO$_3$is used as a single buffer layer, the grain size of YBCO is observed to be larger than that of YBCO/CeO$_2$by 200 times and the transition temperature of the film is enhanced to be about 84 K. CeO$_2$/BaTiO$_3$double buffer layer has been adopted to enhance the superconducting properties, which results in the enhancement of the critical temperature and the critical current density to be about 85 K and 8.4 $\times$ 10$^4$ A/cm$^2$ at 77 K, respectively mainly due to the enlargement of the grain size of YBCO film.ilm.

• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.431-434
• /
• 2016

Tris-HCl buffer solution is extensively used in biochemistry and molecular biology to maintain a stable pH for biomolecules such as nucleic acids and proteins. Here we report on the high-precision THz dielectric spectroscopy of a 10 mM Tris-HCl buffer. Using a double Debye model, including conductivity of ionic species, we measured the complex dielectric functions of Tris-HCl buffer. The fast relaxation time of water molecules in Tris-HCl buffer is ~20% longer than that in pure water while the slow relaxation time changes little. This means that the reorientation dynamics of Tris-HCl buffer with such a low Tris concentration is quite different from that of pure water.