• Macromolecular Research
• /
• v.10 no.6
• /
• pp.332-338
• /
• 2002

The effect of an electron beam and ${\gamma}$-ray irradiation on the curing of epoxy resins was investigated. Diglycidyl ether of bisphenol A (DGEBA) and diglycidyl ether of bisphenol F (DGEBF) as epoxy resin were used. The epoxy resins containing 1.0-3.() wt% of triarylsulphonium hexafluoroantimonate(TASHFA) and triarylsulphonium hexafluorophosphate(TASHFP) as initiator were irradiated under nitrogen at room temperature with different dosage of EB and ${\gamma}$-rays from a Co$^{60}$ u source. The chemical and mechanical characteristics of irradiated epoxy resins were compared after curing of EB and ${\gamma}$-ray irradiation. The thermal properties of cured epoxy were investigated using dynamic mechanical thermal analysis. The chemical structures of cured epoxy were characterized using near infrared spectroscopy. Mechanical properties such as flexural strength, modulus were measured. The gel fraction of DGEBA with ${\gamma}$-ray was higher than that of the epoxy with EB at the same dose. Young's modulus of the sample irradiated by ${\gamma}$-ray is higher than that of sample cured by EB. From the result of strain at yield, it was found that the epoxy cured by ${\gamma}$-ray had a higher stiff property compared with the irradiated by EB.

• Membrane and Water Treatment
• /
• v.9 no.2
• /
• pp.79-85
• /
• 2018

In this work, batch adsorption of anionic dye acid green-25 (AG-25) from aqueous solution has been carried out at room temperature using anion exchange membrane (DF-120B) as a noval adsorbent. The effect of various experimental parameters such as contact time, membrane dosage, ionic strength and temperature on the adsorption of dye were investigated. Kinetic models namely pseudo-first-order, pseudo-second-order, Elovich, liquid film diffusion, Bangham and modified freundlich models were employed to evaluate the experimental data. Parameters like adsorption capacities, rate constant and related correlation coefficients for every model are calculated and discussed. It showed that adsorption of AG-25 onto DF-120B followed pseudo-first-order rate expression. Thermodynamic study indicates that adsorption of AG-25 onto DF-120B is an exothermic and spontaneous process.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.11a
• /
• pp.379-379
• /
• 2018

MXenes are a new family of 2D transition metal carbide nanosheets analogous to graphene (Lv et al., 2017; Sun et al., 2018). Due to the easy availability, hydrophilic behavior, and tunable chemistry of MXenes, their use in applications for environmental pollution remediation such as heavy metal adsorption has recently been explored (Li et al., 2017). In this study, three-dimensional (3D) MXene ($Ti_3C_2T_x$) films with high adsorption capacity, good mechanical strength, and high selectivity for specific radionuclide from aquose solution were successfully fabricated by a polymeric precursor method using vacuum-assisted filtration. The highest removal efficiency on the films was 99.54%, 95.61%, and 82.79% for $Sr^{2+}$, $Co^{2+}$, and $Cs^+$, respectively, using a film dosage of 0.06 g/ L in the initial radionuclide solution (each radionuclide concentration = 1 mg/L and pH = 7.0). Especially, the adsorption process reached an equilibrium within 30 min. The expanded interlayer spacing of $Ti_3C_2T_x$ sheets in MXene films showed excellent radionuclide selectivity ($Cs^+$ and/or $Sr^{2+}/Co^{2+}$) (Simon, 2017). Besides, the MXene films was not only able to be easily retrieved from an aqueous solution by filtration after decontamination processes, but also to selectively separate desired target radionuclides in the solutions. Therefore, the newly developed MXene ($Ti_3C_2T_x$) films has a great potential for radionuclide removal from aqueous solution.

• Geosystem Engineering
• /
• v.21 no.5
• /
• pp.273-281
• /
• 2018

In this study, the activated red mud was used as a new and appropriate adsorbent for the removal of ferrocyanide and ferricyanide from aqueous solution. Predicting the removal percentage and adsorption capacity of ferro-ferricyanide by activated red mud during the adsorption process is necessary which has been done by modeling and simulation. The artificial neural network (ANN) was used to develop new models for the predictions. A back propagation algorithm model was trained to develop a predictive model. The effective variables including pH, absorbent amount, absorbent type, ionic strength, stirring rate, time, adsorbate type, and adsorbate dosage were considered as inputs of the models. The correlation coefficient value ($R^2$) and root mean square error (RMSE) values of the testing data for the removal percentage and adsorption capacity using ANN models were 0.8560, 12.5667, 0.9329, and 10.8117, respectively. The results showed that the proposed ANN models can be used to predict the removal percentage and adsorption capacity of activated red mud for the removal of ferrocyanide and ferricyanide with reasonable error.

• Advances in concrete construction
• /
• v.12 no.6
• /
• pp.499-505
• /
• 2021

Geopolymer binders fascinate the attention of researchers as a replacement to cement binder in conventional concrete. One-ton production of cement releases one ton of carbon-dioxide in the atmosphere. In the replacement of cement by geopolymer material, there are two advantages: one is the reduction of CO₂ in the atmosphere, second is the utilization of Fly ash and Ground granulated blast furnace slag (GGBFS) are by-products from coal and steel industries. This paper focuses on the mechanical properties of steel fiber reinforced geopolymer concrete. The framework considered in this research work is geopolymer source (Fly ash, GGBFS and crimped steel fibre) and alkaline activator which consists of NaOH and Na₂SiO₃ of molarity 8M. Here the Na₂SiO₃ / NaOH ratio was taken as 2.5. The variables considered in this experimental work include Binder content (360,420 and 450 kg/m³), the proportion of Fly ash and GGBS (70-30, 60-40 and 50-50) for three different grades of Geopolymer concrete (GPC) GPC 20, GPC 40 and GPC 60. The percentage of crimped steel fibres was varied as 0.1%, 0.2%, 0.3%, 0.4% and 0.5%. Generally, the inclusion of steel fibres increases the flexural and split tensile strength of Geopolymer concrete. The optimum dosage of steel fibres was found to be 0.4% (by volume fraction).

• Advances in concrete construction
• /
• v.10 no.5
• /
• pp.403-416
• /
• 2020

This study investigated the effect of alkaline activators - NaOH_aq (NH) (NH: 0-16 M) and Na₂SiO_3aq (NS) (NS/NH: 0-3.5) in the synthesis of silico-manganese fume (SMF) and ground blast furnace slag (BFS) blended alkali-activated mortar (AASB). The use of individual activator was ineffective in producing AASB of sufficient fresh and hardened properties, compared to the synergy of both activators. This may be attributed to incomplete dissolution and condensation of oligomers required for gelation of the binder. An inverse relationship was noted among the fresh properties and the NH concentration or NS/NH ratio. This was influenced by the dissolution and condensation of silicate monomers under polymerization process. The maximum 28-day strength of ~45 MPa, setting time of 60 min and flow of 182 mm was obtained with the use of combined activators (10M-NH and NS/NH=2.5). The combined activators at NS/10M-NH=2.5 constituted SiO₂/Na₂O, H₂O/Na₂O and H₂O/SiO₂ molar ratio of 1.61, 17.33 and 10.77, respectively. This facilitated the formation of C-S-H, C/K-A-S-H and C-Mn-S-H in the framework together with an increase in the crystallinity due to more silicate re-organization within the aluminosilicate chain. On comparison of the high concentrated with mild alkali synthesized product, it revealed that the concentration of OH^- and Si monomers together with alkali metals influenced the dissolution of precursors and embedment of the constituent elements in the polymeric matrix. These factors eventually contributed to the microstructural densification of the mortar prepared with NS/10M-NH=2.5 thereby enhancing the compressive strength.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.159-169
• /
• 2007

The behavior of fiber-reinforced cemented sands (FRCS) was studied to improve a brittle failure mode observed in cemented sands. Nak-dong River sand was mixed with ordinary Portland cement and a Polyvinyl alcohol (PVA) fiber. A PVA fiber is widely used in concrete and cement reinforcement. It has a good adhesive property to cement and a specific gravity of 1.3. A PVA fiber has a diameter of 0.1 mm that is thicker than general PVA fiber for reinforced cement. Clean Nak-dong River sand, cement and fiber at optimum water content were compacted in 5 layers giving 55 blows per layer. They were cured for 7 days. Cemented sands with a cement/sand ratio of 4% were fiber-reinforced at different locations and tested for unconfined compression tests. The effect of fiber reinforcement form and distribution on strength was investigated. A specimen with evenly distributed fiber showed two times more strength than not-evenly reinforced specimen. The strength of fiber-reinforced cemented sands increases as fiber reinforcement ratio increases. A fully reinforced specimen was 1.5 times stronger than a specimen reinforced at only middle part. FRCS behavior was controlled not only by a dosage of fiber but also by fiber distribution methods or fiber types.

• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.13-19
• /
• 2006

This paper reports the test results for shrinkage properties of low shrinkage high performance concrete developed by the authors depending on specimen size and constraint of reinforcing bar. As properties in fresh concrete low shrinkage high performance concrete(LSHPC) combined with expansive additives and shrinkage reducing admixture resulted in increase SP dosage due to loss of fluidity compared with that of control mixture concrete, while the dosage of AE agent was decreased. LSHPC exhibited higher compressive and tensile strength than control mixture concrete. For the effect of specimen size, an increase in specimen size led to a reduction of drying shrinkage. However, it was found that the autogenous shrinkage was not affected by the specimen size and measuring method. For constraint condition, an increase in the ratio of reinforcing bar caused the slight reduction in the strain of reinforcing bar, while it increased the autogenous shrinkage stress. It was seen that LSHPC was effective to reduce autogenous shrinkage by as much as 70% compared with control mixture high performance concrete.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.1028-1033
• /
• 2010

The effects of delta-aminolevulinic acid (DALA) or chito-oligosaccharide (COS) in layer diets on production performance, egg quality and hematological characteristics were investigated in this 8-week trial. Two hundred and seventy 27-week-old (Hy-Line brown) layers were randomly assigned to 5 treatments with 9 replications per treatment. Dietary treatments were i) Control (basal diet); ii) DALA1 (basal diet+DALA 2 mg/kg); iii) DALA2 (basal diet+DALA 4 mg/kg); iv) COS1 (basal diet+COS 100 mg/kg) and v) COS2 (basal diet+COS 200 mg/kg). In this study, no significant difference was observed in feed intake and egg shell quality (eggshell breaking strength and egg shell thickness) among treatments. The inclusion of DALA increased egg production during the first 4 weeks. Egg weight was increased in both DALA (quadratic, p<0.05) and COS (linear, p<0.05) treatments compared with the control treatment. Laying hens fed the DALA treatment had an increased yolk color unit (quadratic, p<0.05) and haugh unit (linear, p<0.05) compared with the control group. Similarly, these characteristics were also affected by COS treatments, with both values being linearly increased (p<0.05) in COS treatments compared with the control treatment. Additionally, birds fed DALA treatments significantly increased (quadratic, p<0.05) the number of RBC, WBC and lymphocytes compared with the control treatment. Dietary DALA supplementation linearly increased (p<0.05) the serum iron concentration at the end of the 8th week. The inclusion of COS increased (linear, p<0.05) the concentration of RBC, WBC and lymphocytes compared with the control treatment. In conclusion, dietary DALA at the lower dosage (2 mg/kg) could exert better effects in laying hens than higher dosage (4 mg/kg). Birds fed DALA supplemented diet had an increased iron availability, egg weight, eggshell quality and immunity. Moreover, the inclusion of COS (200 mg/kg) can increase egg weight, eggshell quality and immunity in laying hens. Therefore, both the utilization of COS and DALA could be considered as a new strategy for optimizing egg quality and health condition of laying hens.

• The Journal of Internal Korean Medicine
• /
• v.20 no.1
• /
• pp.9-32
• /
• 1999

The aim of the study was the application of Radix Aconiti(附子) in the treatment of heart-systemic disease(心系疾患). We inquired into the prescriptions with Radix Aconiti (附子) in the treatment of heart-systemic disease(心系疾患) in many other aspects through 'Sanghanron'(傷寒論). The results were obtained as follows; The prescriptions with Radix Aconiti(附子) form about 18%, it's related text forms about 11%. Radix Aconiti(附子) was used with other 20 kinds of herbs in 7 categories-hyepyo(解表), jesp(除濕), selyul(泄熱), hwagihyengsu(化氣行水), onjungsanhan(溫中散寒), ikum(益陰), anhejitong(安蛔止痛). Among these herbs, the combination with Zingiver officinale Roscoe(乾薑) is focal usage, because the combination was used in 8 prescriptions out of 20. A fresh Radix Aconiti(附子) which was used with Zingiver officinale Roscoe(乾薑) is efficacious against poison of Radix Aconiti(附子). When this combination was used, it had been boiled for a long time in most cases, it is also helpful of counteracting poison. A Steamed Radix Aconiti(附子) was used with Zingiver officinale Roscoe (生薑). In the special feature of dosage of Radix Aconiti(附子), it was considerately used in many different conditions which includes strength or weakness of patients, and the critical or slight condition of illness. In the taking frequency and dosage of the medicine, it was applied the same. There are 2 methods of boiling, one is boiling separately from other herbs and the other is boiling all together. When boiling seperately, it works more quikly and strongly. In the case of severe 'rehan'(裏寒) which refuses warmed medicine, it was used with 2 other herbs(猪膽汁, 人尿) that take down from yang(陽) to ying(陰). The foci of prescriptions that contain Radix Aconiti(附子) is the type of Sayektang(四逆湯類), because Gungangbujatang(乾薑附子湯) does the important work in the prescriptions. The paradigm of Radix Aconiti(附子) treated palpitation, edema, diziness, confusion, numbness, iced limbs in the treatment of heart-systemic disease(心系疾患). In the usage of Radix Aconiti(附子), the above results need to be referred and further clinical studies will be necessary.