• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11C
• /
• pp.1111-1117
• /
• 2003

The maximum Doppler frequency, or equivalently, the mobile speed is very useful information to optimize the performance of many wireless communication systems. However, the performance of a maximum Doppler frequency estimator is limited since it requires an estimate of the signal-to-noise ratio (SNR) of the channel environment. In this paper, the improved method for the maximum Doppler frequency estimations based on the decision feedback Doppler adaptive band-limit (DF-DABL) method is proposed. To reduce the effect of additive noise, the proposed algorithm uses a novel Doppler adaptive band-limit (DABL) technique. The distortion due to the additive noise is drastically removed by the proposed DF-DABL method. Especially, the DF-DABL method does not need any other channel information such as SNR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.9
• /
• pp.1999-2005
• /
• 2015

A wind velocity is measured in a weather radar as well as the strength of return echoes from rain clouds. These wind velocities are obtained through estimation of Doppler frequencies in return signals. This kind of Doppler frequency estimation method is called as a correlation method. It is widely used in most weather radars because of less computation time. However, it may cause serious errors if a spectrum is not symmetric. Therefore, in this paper, it is shown that the improved method using 3^rd order phase estimation model yields the more accurate estimation of the average Doppler frequency using various simulated weather data.

• Korean Journal of Remote Sensing
• /
• v.23 no.5
• /
• pp.421-430
• /
• 2007

This paper presents the results of the ocean surface current velocity estimation using 6 Radarsat-1 SAR images acquired in west coastal area near Incheon. We extracted the surface velocity from SAR images based on the Doppler shift approach in which the azimuth frequency shift is related to the motion of surface target in the radar direction. The Doppler shift was measured by the difference between the Doppler centroid estimated in the range-compressed, azimuth-frequency domain and the nominal Doppler centroid used during the SAR focusing process. The extracted SAR current velocities were statistically compared with the current velocities from the high frequency(HF) radar in terms of averages, standard deviations, and root mean square errors. The problem of the unreliable nominal Doppler centroid for the estimation of the SAR current velocity was corrected by subtracting the difference of averages between SAR and HF-radar current velocities from the SAR current velocity. The corrected SAR current velocity inherits the average of HF-radar data while maintaining high-resolution nature of the original SAR data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1551-1557
• /
• 2013

A current velocity measurement radar estimates Doppler frequencies to extract the corresponding surface velocity information. Therefore, it is required to maintain the high degree of reliability and accuracy of Doppler frequency estimates. However, Doppler spectra of water surface return echoes can have very widely varying shapes according to measurement environments and weather conditions. Therefore, serious problems may arise in maintaining the reliability and accuracy of conventional velocity estimating algorithm in a radar sensor. Therefore, in this paper, a newly suggested algorithm is proposed for improvement using estimation of peak Doppler frequencies. The proposed method shows that the more accurate velocity measurement can be possible comparing with the conventional one.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.58-66
• /
• 2001

In this paper, a computationally efficient time delay and doppler estimation algorithm is proposed for active sonar with Linear Frequency Modulated (LFM) signal. To reduce the computational burden of the conventional estimation algorithm, an algebraic equation is used which represents the relationship between the time delay and doppler in cross-ambiguity function of the LFM signal. The algebraic equation is derived based on the Fast maximum Likelihood (FML) method. Using this algebraic relation, the time delay and doppler are estimated with two 1-D search instead of the conventional 2-D search. The estimation errors of the proposed algorithm are analyzed for various SNR's. The simulation result demonstrates the good performance of the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.572-579
• /
• 2010

Filtered multi-tone (FMT) is a form of multicarrier modulation utilizing frequency-domain equalization efficient in multi-path fading channels. Doppler frequency information can be employed for channel estimation and link adaptation to improve the performance. However, most previous studies have concentrated on the orthogonal frequency division multiplexing (OFDM) instead of FMT. Moreover, they have not considered the synchronization error that can commonly occur in practical systems. In this paper, we propose Doppler frequency estimation scheme that is effective in FMT systems with residual synchronization error and high noise levels.

• Journal of Satellite, Information and Communications
• /
• v.12 no.2
• /
• pp.79-82
• /
• 2017

A new and effective Doppler effects compensation scheme for orthogonal frequency division multiplex(OFDM) system based on constellation estimation is presented with analytical descriptions which quantitatively clarify the mechanism of inter-carrier interference(ICI). The proposed compensation techniques, applicable both frequency and time domain with remarkable accuracy, are crucial to the future OFDM system operating on ultra high speed mobile vehicles.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.2 s.21
• /
• pp.38-48
• /
• 2005

Instantaneous frequency of doppler signals is used to get the information of the relative velocity and the miss distance between a missile and a corresponding target. In this paper, we have performed time-frequency analysis and instantaneous frequency estimation with Short Time Fourier Transform(STFT), Wigner Ville Distribution(WVD) and Continuous Wavelet Transform(CWT) about the doppler signals generated by moving targets. Performance evaluation was performed using simulated doppler signals generated by a single moving target and two moving targets. From the results of the time-frequency analysis, we found that WVD method was the most efficient instantaneous frequency estimator among the three methods. But in case of two moving targets, WVD method got cross talks and CWT method got oscillation when two doppler frequencies were close to each other.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.309-315
• /
• 2018

A Stepped Frequency Radar(SFR) is a method of achieving high range resolution by gradually increasing the frequency of a transmitted pulse to create a wide synthetic bandwidth. However, in the case of moving target, accurate range estimation can not be performed due to the range-Doppler coupling phenomenon, so it is necessary to compensate through accurate velocity estimation. In this paper, we propose a stepped frequency radar waveform with a Coherent Pulse Train(CPT), velocity estimation results according to parameters using this method and VMD(Velocity Measurement Data) were compared and analyzed by numerical simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.511-518
• /
• 2023

Accurate ranging is one of the key factors in the test and evaluation process of underwater vehicles. In particular, when estimating range using Time of Arrival (ToA) values, signals such as Linear Frequency Modulation (LFM), a chirp signal, are highly applicable due to their correlated nature. However, in a Doppler shift environment with mobility, measurement errors may occur due to the range-Doppler coupling effect. In this paper, we propose a signal that compensates for the distance-Doppler coupling effect to reduce the measurement error of the arrival time value. The proposed signal is constructed by superimposing two types of LFM signals, and the range-Doppler coupling effect can be minimized. Through simulations, it is confirmed that the proposed signal is a way to compensate for the distance-Doppler coupling effect in the distance estimation of underwater mobile bodies, reducing the measurement error of the arrival time value.