• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.131-137
• /
• 2003

Proper door effort, required force to open or close a vehicle door, is an essential door design factor for the safety of passengers and pedestrians. Section shape of the door checker arm is the most influential design parameter for achieving a door effort design target. In this research. an analysis procedure to predict door effort using a simplified plane strain finite element model wes investigated for two passenger cars, for which mechanism of checker systems were: different. The variation of checker arm force to be required during moving on arm in opening and closing direction was estimated through analysis, and the result was transformed to the door effort with respect to door opening angle by considering door characteristics. Also, the self·closing force due to door weight was theoretically calculated and added to the door effort from checker arm force. Finally the estimated results of door effort were compared with test results.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.66-71
• /
• 2021

In this study, the shape design optimization of a refrigerator door hinge stopper was performed to reduce the discrepancy in the opening forces of the left and right doors of a double-door refrigerator. A finite element model was constructed and analyzed by quasi-static analyses to evaluate the structural performance of the door hinge stopper. The reaction moment calculated at the hinge axis was used as a measure of the door opening and closing forces. The design objective is to increase the door opening force by 50% while maintaining the door closing force and the maximum stress calculated in the body of the hinge stopper at the current level. A new design concept with a contacting slot was proposed to decouple the door closing and opening forces. Shape optimization was performed to determine the dimensions of the new design of the hinge stopper, and the rib pattern was determined by topological optimization to further increase the door opening force. It was observed that the new design met all design requirements.

• 대한안전경영과학회지
• /
• 제23권4호
• /
• pp.43-48
• /
• 2021

In this study, the experiment was conducted on a fire door(W × H = 0.98 m × 2.19 m) installed on the vestibule. The effective leakage area for each opening angles and closing forces derived from the impulse-momentum equation was compared and analyzed with the experimental results. As a result of the experiment, the major factors affecting the door closing forces were the pressure difference and the area of the door. The difference of door closing forces between measured and calculated values by the impulse-momentum equation showed a deviation of less than ±15% at the opening angles of 5°to 10°. At the door opening angle of 2.5°, the dynamic pressure was much higher than the measured static pressure, and this pressure difference is estimated to be air resistance acting to prevent the door from being completely closed.

• 한국화재소방학회논문지
• /
• 제27권2호
• /
• pp.6-10
• /
• 2013

본 연구는 풍도, 부속실, 거실 그리고 계단실로 구성된 구조물의 제연설비 성능에 관한 연구를 수행하고 급기 가압실의 안전성을 구현하기 위한 실험 자료를 구축하고자 하는데 목적이 있다. 이를 위해서 부속실 가압 및 차압 조절 설비와 방화문의 개폐력 측정 장치를 제작하였다. 본 주제는 부속실의 가압을 위한 설계유량과 폐쇄시 차압이 동일한 경우 방화문의 크기와 닫히는 각속도 증가에 따라서 폐쇄력을 분석하였다. 실험 결과 방화문의 크기와 닫히는 각속도가 증가 할수록 폐쇄력이 증가하였으며, 일정 각속도 이상으로 증가할 경우 폐쇄력이 일정하게 유지되는 임계각속도가 존재하는 것을 확인하였다.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.41-47
• /
• 2021

In this study, the hinges of heavy weight doors were designed and analyzed in line with the trend that built-in appliances are becoming larger and the weight of doors is also increasing. The main specification of the heavy weight door hinge is to allow the deflection at the end of the door to be less than 2 mm when opening and closing, including the automatic closing, slow closing, and closing force control functions. The structural analysis of the design mechanism, component design, and methods for improving the deflection are as follows: 1) Mechanism of the automatic closing function should sense automatically using the spring compression force at a specific angle by the contact between the cam and the cam module roller. 2) Through structural analysis, the maximum stress of the door was found in the link pin hole connected to the pin at each link. 3) Consequently, the pin holder was designed and applied, with little variance, but up to 93% of the specification limit.

• 한국화재소방학회논문지
• /
• 제25권2호
• /
• pp.132-137
• /
• 2011

부속실 단독가압의 제연설비 구역에서 계단실 출입문의 크기 변화가 개방 및 폐쇄조건에 미치는 영향을 분석하기 위해서 자동폐쇄장치의 구조와 저항모멘트의 관계를 정리하였으며, 부속실 출입문의 크기 변화를 고려하여 개방력과 폐쇄력을 측정하였다. 그 결과 부속실 출입문의 크기가 증가할수록 개방 및 폐쇄조건에 도달하기 위한 힘의 크기는 증가하였으며, 폐쇄시간, 회전속도, 회전각도와 힘의 관계, 자동폐쇄장치의 효율을 고려한 부속실 출입문의 설계범위가 존재함을 확인하였다.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.52-57
• /
• 2012

Proper door effort is required for the safety of passenger and pedestrian while securing door operating convenience. 3D finite element analyses for a hybrid door checker were carried out to estimate door checker arm resistance force. And, from the estimated door checker arm resistance force and theoretically calculated self-closing force, door effort was predicted. The analysis results at checker arm peaks showed excellent correlation with the test results. Also, in order to reduce solving time, a modified model with simple spring element was investigated. Finally an equation to easily calculate checker arm resistance force from checker arm shape and spring constant was suggested and its usefulness in early design stage was discussed.

• 한국화재소방학회논문지
• /
• 제24권3호
• /
• pp.106-112
• /
• 2010

본 연구는 제연구역 출입문의 자동폐쇄장치의 개발을 위한 기초 연구의 일환으로 자동폐쇄장치의 운동해석을 수행하였다. 본 연구는 자동폐쇄장치의 프로세스와 자동폐쇄조절장치의 운동 메커니즘 정립과 기구 모델링을 바탕으로 자동폐쇄장치의 해석이론을 정립하였고, 해석이론을 바탕으로 한 운동해석 시뮬레이션을 통해 폐쇄력 장치를 선정하고 자동폐쇄조절장치의 각 요소를 설계할 수 있는 엔지니어링 데이터 축과 원천기술을 확립하였다. 따라서 본 연구로부터 자동폐쇄장치 개발의 유연성과 탄력성을 줄 수 있고, 또한 자동폐쇄장치의 개발로 인한 연기의 제어수단과 기술적 대책을 마련하고 제연시스템의 높은 신뢰성과 안정성을 확보할 수 있을 것으로 본다.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.364-371
• /
• 2016

본 논문에서는 차량이 주차된 지형의 조건에 따라 적용되는 도어 개폐 보조력 예측 모델을 제시하였다. 경사도, 사용자의 힘 등의 조건에 따른 개폐력 설정을 위하여 작동 보조력에 대한 학습 모델을 구현하여 비교하였고, 예측 모델의 학습을 위하여 축소모형을 제작하여 실험을 통해 학습데이터를 얻을 수 있는 실험 모델을 구성하였다. 실제 보상력 데이터를 학습, 반영하여 적정 값을 도출할 수 있는 학습 알고리즘을 개발하고, 이를 적용할 수 있는 시스템을 개발하였다. 학습 방법 중에서 인공신경망(Artificial Neural Network, ANN)과 서포트 벡터 머신(Support Vector Machine, SVM) 알고리즘을 적용하여 비교 검증하였다. 실제 측정값과 비교 검증한 결과, 차량의 도어 개폐 보조력 예측을 위해서 서포트 벡터 머신의 상대적으로 높은 적용성을 확인할 수 있었으며, 이 예측 모델을 활용하여 경사, 사용자의 힘에 따라 도어 개폐 구동 모터가 보상해야 할 적정한 힘을 예측하여 시간에 따라 구동함으로써 사용자가 평지와 같은 힘으로 문을 제어할 수 있는 시스템 구성을 제시하였다.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.86-91
• /
• 2012

Door effort was calculated for a new door checker with torsion bar spring and integrated checker case by FE analysis. A hybrid checker arm which has peaks and valleys only on the upper surface was adopted to reduce noise in operation and make operation with more distinctive steps. The checker arm was modeled using shell elements to estimate both the longitudinal and the lateral resistance force by checker arm. By combining the checker arm resistance force obtained from analysis and the door self-closing force by the theoretical calculation, door effort was predicted to show the good correlation with test results. In addition the unrolling effect of roller model was investigated and a new roller type for more smooth rolling was studied.