• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.72-75
• /
• 2005

Recently, as the global warming by fossil fuels become social issues. the interest of renewable energy producing system is increasing rapidly. Among these, wind turbines are most highlighted because of its economic competitiveness. The tower occupying about $20\%$ of overall turbine costs, is one of the main components of wind turbine. Tower access door located to base part of the tower, is used to enter the tower. This is the main structural weak point because of door hole, weldment, etc. In this study, by FEM, we retrieved the maximum van Mises stress at door location and carried out fatigue analysis using stresses at weld toe locations of tower access door part.

• 한국정밀공학회지
• /
• 제28권7호
• /
• pp.821-826
• /
• 2011

This paper deals with an analysis of dynamic mechanism for the industrial two-step folding automatic door. A nonlinear equation of motion was derived in terms of folding angle to estimate driving forces. Based on this dynamic behavior, time taken during the door's opening well as their velocities were controlled so that the operating conditions can be obtained for the purpose of design. The stiffness of twisting spring was also investigated when the automatic door closed, because a dangerous accident takes place from the door's free falling. The current research will be a very useful tool in the near future for the dynamic analysis for the multi-step folding automatic door.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.1016-1023
• /
• 2006

When one opens the door of a microwave oven during its operation, twisting deformation of the door occurs, which may cause leakage of microwave through the gap between the door and the front plate. A numerical optimization is implemented to minimize the gap by maximizing twisting stiffness of the door of the oven. Design variables are deformed, which describe the shape of the bead in the horizontal and vertical flanges of the door frame. To minimize the twisting deformation, Two optimal design problems to find shapes of the bead in the flange are established. The problems are solved by a numerical optimization technique, their results being evaluated.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.86-91
• /
• 2012

Door effort was calculated for a new door checker with torsion bar spring and integrated checker case by FE analysis. A hybrid checker arm which has peaks and valleys only on the upper surface was adopted to reduce noise in operation and make operation with more distinctive steps. The checker arm was modeled using shell elements to estimate both the longitudinal and the lateral resistance force by checker arm. By combining the checker arm resistance force obtained from analysis and the door self-closing force by the theoretical calculation, door effort was predicted to show the good correlation with test results. In addition the unrolling effect of roller model was investigated and a new roller type for more smooth rolling was studied.

• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.594-600
• /
• 2006

In this study, transient and quasi-static analysis were done for the evaluation of structural integrity of the platform screen door due to train wind pressure. Fluent 6.0 was used to calculate the train wind pressure, and Ansys 10.0 was used to evaluate the structural stability of platform screen door due to train wind pressure. Transient analysis was used to check the design requirements of platform screen door, and quasi-static analysis was introduced to save the calculating time and check quickly structural performances when compared to those of transient analysis. The results show that structural stability of the platform screen door under train wind pressure is proven and quasi-static analysis can quickly check the structural integrity of platform screen door.

• 한국자동차공학회논문집
• /
• 제10권2호
• /
• pp.228-233
• /
• 2002

TWB(Tailor Welded Blanks) is one of the recent techniques to reduce the weight and cost of the body members. To apply the TWB technique, we must decide the position of the welding line and the thickness of the welded blanks. Although many researchers have tried to check the formability of welded blanks, there are not so many researches from the structural point of view. In this paper, the TWB technique is applied to combine the door inner panel and the hinge face panel into one piece. The finite element structural analysis of the door assembly leads to the final design of the tailor welded door inner panel, which shows the mass reduction of 1.08kg without the sacrifice of the structural stiffness. The structural stiffness analysis includes the frame stiffness analysis, the belt line stiffness analysis, the door sagging analysis and the vibration analysis.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.742-752
• /
• 2006

The purpose of this study were to classify the door to door selling consumers's according to their cosmetics lifestyles and to analyze the cosmetics a purchase behavior and satisfaction of classified groups. subject were 424 women living in chung-cheong and kyung-gi. The statistical methods to analyze the data were frequency, t-test, factor analysis. cluster analysis, and ANOVA(LSD) using SPSSWIN package. Considering that there were significant differences in the behavior of uses, purchase propensity according to cosmetics lifestyles for door to door selling, it is reasonable that the consumer market should be subdivided by their cosmetics lifestyles and the quality improvement and distinguished sales strategies should be required.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.187-193
• /
• 2002

Since the bus is regarded as the one of the most public transportation systems, research on the safety and facilities of the bus has been increased actively in recent years. In this paper, we concern the design of the bus door mechanism that is composed of many linkages and actuators(or motors). In particular, the folding door mechanism is representative system installed in most of urban buses. To design the folding door mechanism, we construct the kinematic and dynamic analysis model fur computer simulation. Also, the dynamic analysis is accomplished by both direct dynamics and inverse dynamics. Since the folding door mechanism has many design variables, the analysis program is developed to perceive kinematic and dynamic characteristics according to the design variables and simulation conditions.

• 한국가구학회지
• /
• 제12권1호
• /
• pp.39-45
• /
• 2001

This study was carried out to evaluate the feasibility of using HDF as surface panels as well as core materials for flush door manufacturing. Several core compositions were developed and applied to manufacture door specimens. Core materials were tested under bending load, door manufacturing process was analysed to find better way of using HDF for door manufacturing, and door specimens were tested under bending, twisting and impact loads. From this study, it was concluded that HDF can be used to manufacture quality flush doors. And it was desirable to use light color HDF as surface panels because dark color HDF caused a problem in manufacturing process by shadow shown through finishing veneer. HDF doors were light, and showed good quality and higher resistance against bending twisting and impact loads.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.25-30
• /
• 2013

The main purpose of this research is to predict dynamic behavior of door locking system for side impact safety and the design process to avoid door opening is introduced. The equations of motion that represent the system are obtained from the energy equation. From them, the motion of door handle is predicted by using Runge-Kutta $4^{th}$ order method and the simulation result is compared with the real crash data. Also, the design guide to define the properties of door locking system from the standpoint of avoiding door opening phenomenon is introduced.