• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.202-212
• /
• 2017

This study was to establish the interrelation between chemical compositions and near infrared (NIR) spectra for the classification on distinguishability of domestic gymnosperms. Traditional wet chemistry methods and infrared spectral analyses were performed. In chemical compositions of five softwood species including larch (Larix kaempferi), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), cypress (Chamaecyparis obtusa), and cedar (Cryptomeria japonica), their extractives and lignin contents provided the major information for distinction between the wood species. However, depending on the production region and purchasing time of woods, chemical compositions were different even though in same species. Especially, red pine harvested from Naju showed the highest extractive content about 16.3%, whereas that from Donghae showed about 5.0%. These results were expected due to different environmental conditions such as sunshine amount, nutrients and moisture contents, and these phenomena were also observed in other species. As a result of the principal component analysis (PCA) using NIR between five species (total 19 samples), the samples were divided into three groups in the score plot based on principal component (PC) 1 and principal component (PC) 2; group 1) red pine and Korean pine, group 2) larch, and group 3) cypress and cedar. Based on the chemical composition results, it was concluded that extractive content was highly relevant to wood classification by NIR analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.168-168
• /
• 2015

자연하천의 주요한 특징 중 하나인 하천의 사행은 직선수로에서 예측되는 유속분포를 왜곡시키며 매우 복잡한 흐름구조를 형성한다. 이는 하상 경계면에서 발생하는 전단응력 분포의 변화를 야기하는데 하상 경계면에서의 전단응력은 다양한 경험적 관계에 의존하는 유사이동의 한계 소류력 산정 및 오염물질 거동해석의 분산계수 산정에 많은 영향을 미치게 된다. 물리적인 관측을 통한 하상 경계면에서의 전단응력의 관측은 다소 제한적이며 많은 비용을 요구한다. 따라서 하상 경계면에서 발생하는 전단응력의 경우 수심의 20% 이하의 연직 유속분포를 벽법칙에 적용하여 추정하는 방법이 주로 이루어지고 있다. 벽법칙을 이용한 하상 경계면의 전단응력을 계산하는 경우 대수중복층의 유속 분포 $u/u^*=(1/{\kappa})ln(zu^*/{\nu})+B$에서 무차원상수 ${\kappa}$와 B의 적절한 추정이 요구되어 진다. 일반적으로 무차원상수 ${\kappa}$와 B는 수리학적으로 매끄러운 벽면에서 대략 ${\kappa}=0.4$, B=5.5로서 경험적으로 이용되고 있다. 본 연구에서는 직선수로 및 다양한 사행수로의 3차원 흐름장 모의를 수행하여 벽법칙의 대수 중복층을 따르는 주흐름 방향 유속의 연직분포를 비교하였다. 수치모의 소프트웨어로서 Linux 기반의 OpenFOAM이 사용되었으며 모델의 검증을 위해 Chang(1971)에 의해 수행 된 사행수로에서의 유속장 관측 결과와 비교하였고 수치모의 결과가 실험 관측치와 잘 일치하는 것으로 판단되었다. 수치모의에 적용 된 사행수로의 형상은 Hey(1976)에 의해 제안 된 사행하천의 지형학적 인자들 간에 관계를 이용하여 사행도 1.03에서 2.42까지 총 7개의 사행수로 지형을 생성하였다. 사행도의 변화에 따라 만곡부 정점에서 대수중복층 구간의 주흐름 방향 유속의 연직분포를 비교한 결과, 본 연구에서 생성 된 모든 사행수로에서 대수중복층 구간의 무차원 유속 $u^+$와 무차원 거리 $z^+$가 로그 분포를 따르는 것으로 나타났으나 경험적으로 사용되었던 무차원상수 B의 경우 사행도가 증가 할수록 대수적으로 감소하는 경향이 나타났다. 본 연구에서는 이러한 관계가 무차원 상수 B값에 미치는 영향을 반영하여 수리학적으로 매끄러운 벽면에서 적용이 가능한 수정된 대수중복층 식을 제시하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.32-32
• /
• 2016

정부는 1999년 제정된 연안관리법에 따라 2000년부터 시행 중인 '연안정비계획' 등을 통하여 연안 침식 대응사업을 지원하고 있다. 그러나 연안의 개발은 지속적으로 일어나고 있으며 그 중 동해항 3단계 북방파제 축조공사가 내년 3월 중으로 착공할 것으로 예상된다. 동해항 3단계 개발사업은 동해항을 환동해권 물류 중심 거점 항만으로 육성하기 위해, 오는 2020년까지 대규모 항만개발과 방파제 등이 축조될 예정이다. 이에 따라 본 연구에서는 동해항 3단계 개발사업의 추진에 따른 인근해변의 해안침식 저감대책 방안으로 해안선 및 수심 변화를 예측하고자 한다. 동해항 인근의 추암 해수욕장부터 삼척 해수욕장까지 대상지역 N-line 모델 적용 및 Case분석을 실시한다. 해안선 변화는 Polar coordinate에서 개발된 One-line 모델에 회절 효과를 반영하고 해빈 경사와 쇄파고에 따라 횡단 방향으로 발생하는 표사로 인한 추가적인 해안선 변화 효과를 반영하여 입사파고 변동에 따른 단기적인 해안선 변화의 변동 폭을 제공한다. 연평균 입사 파고에 따라 형성되는 연안방향 표사로부터 해안선이 변동하며 이 해안선을 기준으로 연평균 파고에 따른 전진 폭과 최고 파고에 따른 침식 폭을 제시한다. 동해항 개발 전 변화 예측 모델링과 동해항 개발 후 변화 예측 모델링을 통해 개발에 따른 장래 해안선의 변화 예측 모델링 결과 분석 및 검토를 실시, 동해항 인근 지역에 적합한 해안선 유지관리 방법 결정 및 제안을 하는데 도움을 줄 것이라 기대된다.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.677-681
• /
• 2018

In this study, the carbon block was prepared using the fluorinated coke and binder pitch by molding compression to increase its density. After fluorination, it is confirmed that the fluorine element on the coke surface was introduced up to 24.14 at% using XPS analysis. The wettability between the fluorinated coke and binder pitch was evaluated according to the reaction temperature. From the result of contact-angle tests, it can be found that the wettability was improved up to 64.7% as more fluorine atoms were introduced on the surface of cokes. Also, the density of the carbon block with the highest amount of fluorine increased with 6.8% compared to that of using the carbon block prepared by the untreated cokes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.122-129
• /
• 2019

Predicting heat transfer from the inner wall of the combustion chamber of the liquid rocket is a very difficult task. Several complex processes, such as convection, radiation and conduction must be taken into consideration. Usually commercial programs are used for the analysis of this processes. However, commercial programs are not a perfect solution, because of the long calculation times and a burdening data-input work. In this study, we developed and implemented one - dimensional thermal analysis. This technique can be easily used on the initial stage. The design of the combustion chamber's cooling channel of the steam generator designed using developed technique. In order to compare experimental and theoretical data, the combustion test was performed. Obtained experimental data for the coolant temperature differ from the theoretical prediction by only 8.5%.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.52-60
• /
• 2019

In this study, the performance and structure of a parallel ejector comprised of multiple single ejectors were confirmed through numerical analysis. The same design variables (mass suction ratio, compression ratio, and expansion ratio) relevant to the performance of a single ejector were considered in the design of the parallel ejector. Analytical results showed that there was no significant difference in the performance of either system related to the operating mass suction ratio; however, the systemsize was significantly reduced. In addition, it was confirmed that when ejectors of the same performance capacity are arranged in parallel, the combined mass suction ratio is lower than that of the single ejector, allowing a lower pressure to be realized. The results of the analysis indicated that the parallel ejector's performance is not significantly different from that of any single ejector, but confirmed that the parallel ejector can offer a configurationdependent advantage in size and operation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.118-125
• /
• 2019

Metals exposed to high temperature/high pressure/oxidant excess environment of an oxygen excess pre-combustor may undergo rapid oxidation. In this study, the test facility to simulate the high temperature/high pressure/oxidant excess environment was constructed and the oxidation resistance evaluation was carried out for various metal materials. As a result, the discoloration of the metallic materials, the change in the surface roughness and the peeling of the metal surface were observed, and the weight change was also observed. The resulst showed that oxidation-resistant coating of a metal material of the combustor is indispensably required, and the use of XM-19, which has the highest content of Cr and Ni, is expected to provide more structural stability.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.436-441
• /
• 2020

Wave field changes resulting from artificial coastal structures constructed in coastal zones have emerged as a major cause of beach erosion, among other factors. The rates of erosion along the eastern coast of Korea have varied mainly owing to the construction of various ports and coastal structures; however, impact assessments of these structures on beach erosion have not been appropriately conducted. Thus, in this study, a methodology to assess the impact of erosion owing to the construction of artificial structures has been proposed, for which a parabolic bay shape equation is used in determining the shoreline angle deformation caused by the structures. Assuming that the conditions of sediment or waves have similar values in most coastal areas, a primary variable impacting coastal sediment transport is the deformation of an equilibrium shoreline relative to the existing beach. Therefore, the angle rotation deforming the equilibrium of a shoreline can be the criterion for evaluating beach erosion incurred through the construction of artificial structures. The evaluation criteria are classified into three levels: safety, caution, and danger. If the angle rotation of the equilibrium shoreline is 0.1° or less, the beach distance was considered to be safe in the present study; however, if this angle is 0.35° or higher, the beach distance is considered to be in a state of danger. Furthermore, in this study, the distance affected by beach erosion is calculated in areas of the eastern coast where artificial structures, mainly including ports and power plants, were constructed; thereafter, an impact assessment of the beach erosion around these areas was conducted. Using a proposed methodology, Gungchon Port was evaluated with caution, whereas Donghae Port, Sokcho Port, and Samcheok LNG were evaluated as being in a state of danger.

• Journal of the Korean Society of Safety
• /
• v.36 no.1
• /
• pp.86-94
• /
• 2021

Lecture rooms are crowded with many attendees. Moreover, they rely significantly on the natural ventilation through windows for removing and controlling indoor contaminants such as CO₂. With the aim of broadening the understanding of the characteristics of natural ventilation phenomena in lecture rooms, the average individual CO₂ release rates of attendees were measured during the course of a lecture and compared with previously reported CO₂ release rates. In addition, the effects of natural ventilation through windows on the time-variant CO₂ concentrations in the center of the lecture room were measured and analyzed. Moreover, details about the overall and regional CO₂ concentrations, as well as the air flows in the lecture room, were simulated and analyzed with computational fluid dynamics software, Fluent 2020 R2. It was found that the average individual CO₂ release rates were slightly slower than previously reported rates. The local CO₂ concentrations in the lecture room for regions with a high density of attendees increased over a short period of time, although the natural ventilation was already started by opening the windows. The overall CO₂ concentration in the lecture room rapidly decreased in the early stage of ventilation, but declined very slowly after a longer period of ventilation time. Therefore, in order to enhance the efficiency of a lecture room's natural ventilation, it is recommended to homogeneously distribute the attendees in the lecture room, and to frequently open the windows for short periods of time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.2
• /
• pp.79-88
• /
• 2022

Social media big data includes a lot of information that can identify not only consumer consumption patterns but also local images. This paper was collected annually data including 'Samcheok' from 2015 to 2019 from Blog and Cafe of Naver and Daum in domestic portal site, and analyzed the regional image change after refining keyword which forms the regional image by performing text mining and network analysis. According to the research results, the regional image of 2015 was expressed with image cognitive elements of the nearby place name or place etc. such as 'Jangho Port', 'Donghae', and 'Beach'. However the regional image both 2016 and 2019 were changed with image cognitive elements of 'SamcheokSolbich' which is a special place within region. Therefore as the keywords related to the local image include 'Jangho Port' and Resort, which are the representative attractions of Samcheok, it can be seen that the infrastructure factor plays a big role in forming the local image. The significance test for the network data used the bootstrap technique, and the p-values in 2015, 2016, and 2019 were 0.0002, 0.0006, and 0.0002, respectively, which were found to be statistically significant at the significance level of 5%.