• Journal of Preventive Medicine and Public Health
• /
• v.56 no.3
• /
• pp.282-290
• /
• 2023

Objectives: This study aimed to evaluate the potential interaction between kidney function and the non-linear association between serum calcium levels and cardiovascular disease (CVD) mortality. Methods: This study included 8927 participants enrolled in the Dong-gu Study. Albumin-corrected calcium levels were used and categorized into 6 percentile categories: <2.5th, 2.5-25.0th, 25.0-50.0th, 50.0-75.0th, 75.0-97.5th, and >97.5th. Restricted cubic spline analysis was used to examine the non-linear association between calcium levels and CVD mortality. Cox proportional hazard regression was used to estimate hazard ratios (HRs) for CVD mortality according to serum calcium categories. All survival analyses were stratified by the estimated glomerular filtration rate. Results: Over a follow-up period of 11.9±2.8 years, 1757 participants died, of whom 219 died from CVD. A U-shaped association between serum calcium and CVD mortality was found, and the association was more evident in the low kidney function group. Compared to the 25.0-50.0th percentile group for serum calcium levels, both low and high serum calcium tended to be associated with CVD mortality (<2.5th: HR, 6.23; 95% confidence interval [CI], 1.16 to 33.56; >97.5th: HR, 2.56; 95% CI, 0.76 to 8.66) in the low kidney function group. In the normal kidney function group, a similar association was found between serum calcium levels and CVD mortality (<2.5th: HR, 1.37; 95% CI, 0.58 to 3.27; >97.5th: HR, 1.65; 95% CI, 0.70 to 3.93). Conclusions: We found a non-linear association between serum calcium levels and CVD mortality, suggesting that calcium dyshomeostasis may contribute to CVD mortality, and kidney function may modify the association.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.93-102
• /
• 2023

Objectives: With the evolution of direct reading sensors, it is possible to monitor several substances through telecommunication. However, there are some limitations on the use of direct reading technologies in the Occupational Safety and Health Act in South Korea, which only applies to detector tubes, noise, heat, and carbon monoxides. The number of chemicals and their amount of use have been continuously increasing in South Korea. The Ministry of Employment and Labor (MoEL) has concerns about worker's health because exposure is only covered for about 1.2% of all distributed chemicals. Using a direct reading monitor with photoionization detectors (PID-DRMs), gases and vapors chemicals can be measured. Based on the data, business owners are able to create corrective strategies, provide better working routines, and select correct respiratory equipment. PID-DRMs are less expensive and easier to handle for an owner voluntarily controlling chemicals emitted in the workplace. However, there are several limitations on using these PID-DRMs to the degree that the MoEL has not been able to select a legal monitor. The aim of this study was to review previous studies related to PID-DRMs and identify the characterization and limitation on PID-DRMs. Methods: To search for related studies on PID-DRMs, key words were used including direct reading monitors/instruments and/or photoionization detectors. Through that, four domestic and 15 international studies were reviewed. Results: Studies on PID-DRMs were conducted by chamber (enclosed, dynamic, walk-in) and in the field (experimental environment, actual environment). The concentration of PID-DRMs and charcoal tubes were compared for a single substance or mixture, or within the PID-DRMs. There was a high correlation between the two concentrations, but it did not meet the accuracy criteria (95% confidence interval, within 25%) of the NIOSH technical report (2012). In addition, differences in measured values occurred according to environmental factors (temperature, humidity) and high concentration, and concentration values tended to be underestimated due to contamination of the sensor. As a way to improve the accuracy of PID concentration, it was proposed to use correction factors, charcoal tube-based correction factors, or to calibrate the PID-DRMs in the same environment as the workplace. Conclusions: PID-DRMs can likely be used by business owners for the purpose of voluntarily managing the workplace environment, and it is expected that it will be possible to use them as legal equipment if a PID sensor can be upgraded and the limitations of the sensor (temperature, humidity, high concentration evaluation, sensor pollution) can be overcome in the near future.

• Korean Journal of Poultry Science
• /
• v.50 no.2
• /
• pp.73-80
• /
• 2023

Vitamin D3 is an essential nutrient which plays an important role in calcium metabolism for eggshell formation, in calcium and phosphorus metabolism for bone mineralization, and in maintaining host immunity. Although there have been a great deal of studies investigating the role of vitamin D3 in eggshell quality and vitamin D3 contents in eggs, no attempts have been made to monitor the eggshell quality and vitamin D3 contents in eggs at farm level. Thus, this survey was conducted to measure eggshell quality and vitamin D3 contents in eggs laid from laying hens fed diets containing different levels of vitamin D3. Eggs from four commercial laying hen farms were sampled before and 1, 2, 3 and 5 weeks after provision of the vitamin D3-enriched diets added with the level of 16,500 IU and 29,000 IU. Dietary vitamin D3 did not affect the eggshell color and breaking strength, but increase the eggshell thickness. In addition, vitamin D3 contents in eggs were elevated as vitamin D3 in diets was increased. It is concluded that addition of dietary vitamin D3 into the diets of laying hens at the commercial laying hen farms could improve eggshell quality and vitamin D3 contents in eggs. It is expected that the prediction equation for egg vitamin D3 contents might be produced if more data on vitamin D3 contents in diets and eggs at the farms are to be analyzed.

• Journal of the Korean Society of International Agriculture
• /
• v.23 no.5
• /
• pp.491-496
• /
• 2011

Breeding for pear resistance to pear psylla (Cacopsylla pyricola) is one of important objective of the National Institute of Horticultural and Herbal Science breeding program. One hundred thirty three accessions from 15 Asian, Chinese and European pear species were investigated for their resistance against pear psylla. The pear psylla resistance was determined based on the following four characteristics: overwintering adult population, the number of eggs and nymphs, and the degree of soot. The different pear species showed varied resistance to pear psylla. Pyrus calleryana and P. betulaefolia indicated the highest antixenosis as ovipositional preference and antibiosis as nymphal feeding and were the most resistant genetic resources. Likewise the European pears (P. communis), 'Conference' and 'Cascade', exhibited little occurrence and damage by pear psylla. These were proved to be promising genetic materials for breeding resistant cultivars because they had good fruit quality and showed resistance to pear paylla. The observed population of overwintering adult, the number of eggs and nymphs of psylla had significant correlation each other.

• Journal of Environmental Science International
• /
• v.32 no.12
• /
• pp.899-914
• /
• 2023

Various seeding materials for cloud seeding are being used, and sodium chloride powder is one of them, which is commonly used. This study analyzed the experimental results of multi-aircraft cloud seeding in connection with Republic of Korea Air Force (CN235) and KMA/NIMS(Korea Meteorological Administration/National Institute of Meteorological Sciences) Atmospheric Research Aircraft. Powdered sodium chloride was used in CN235 for the first time in South Korea. The analysis of the cloud particle size distributions and radar reflectivity before and after cloud seeding showed that the growth efficiency of powdery seeding material in the cloud is slightly higher than that of hygroscopic flare composition in the distribution of number concentrations by cloud aerosol particle diameter (10 ~ 1000 ㎛). Considering the radar reflectivity, precipitation, and numerical model simulation, the enhanced precipitation due to cloud seeding was calculated to be a maximum of 3.7 mm for 6 hours. The simulated seeding effect area was about 3,695 km², which corresponds to 13,634,550 tons of water. In the precipitation component analysis, as a direct verification method, the ion equivalent concentrations (Na⁺, Cl^-, Ca²⁺) of the seeding material at the Bukgangneung site were found to be about 1000 times higher than those of other non-affected areas between about 1 and 2 hours after seeding. This study suggests the possibility of continuous multi-aircraft cloud seeding experiments to accumulate and increase the amount of precipitation enhancement.

• Journal of the Korean Society of Radiology
• /
• v.81 no.5
• /
• pp.1260-1265
• /
• 2020

Kaposi's sarcoma (KS) is a multicentric human immunodeficiency virus-associated neoplasm characterized by multiple vascular nodules in the skin, mucous membranes, and viscera. Gastrointestinal acquired immunodeficiency syndrome (AIDS)-related KS is the most common visceral involvement reported in disseminated disease. Here, we present the findings of a rare case of KS involving multiple organs with abdominal pain and active bleeding in the colon. Multiple intraluminal lesions were found in the terminal ileum, sigmoid colon, and rectum by ileocolonoscopy, and in the jejunum and ileum by fluoroscopy. Abdominopelvic CT revealed multiple enhanced flat lesions in the ileum and enlarged lymph nodes. The diagnosis was confirmed by histopathology, and antiretroviral therapy was initiated as the treatment of choice for KS. Owing to the increasing number of AIDS patients, it is essential for radiologists and clinicians to be aware of the imaging characteristics of KS to protect physicians from indiscriminate exposure to AIDS.

• Atmosphere
• /
• v.34 no.2
• /
• pp.203-216
• /
• 2024

The National Institute of Meteorological Sciences in Korea has developed the Weather Modification Hybrid Rocket (WMHR), an advanced system that offers enhanced stability and cost-effectiveness over conventional solid-fuel rockets. Designed for precise operation, the WMHR enables accurate control over the ejection altitude of pyrotechnics by modulating the quantity of oxidizer, facilitating specific cloud seeding at various atmospheric layers. Furthermore, the rate of descent for pyrotechnic devices can be adjusted by modifying parachute sizes, allowing for controlled dispersion time and concentration of seeding agents. The rocket's configuration also supports adjustments in the pyrotechnic device's capacity, permitting tailored seeding agent deployment. This innovation reflects significant technical progression and collaborations with local manufacturers, in addition to efforts to secure testing sites and address hybrid rocket production challenges. Notable outcomes of this project include the creation of a national framework for weather modification technology utilizing hybrid rockets, enhanced cloud seeding methods, and the potential for broader meteorological application of hybrid rockets beyond precipitation augmentation. An illustrative case study confirmed the WMHR's operational effectiveness, although the impact on cloud seeding was limited by unfavorable weather conditions. This experience has provided valuable insights and affirmed the system's potential for varied uses, such as weather modification and deploying high-altitude meteorological sensors. Nevertheless, the expansion of civilian weather rocket experiments in Korea faces challenges due to inadequate infrastructure and regulatory limitations, underscoring the urgent need for advancements in these areas.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.5
• /
• pp.21-29
• /
• 2024

Reducing the radiation dose during CT scanning can lower the risk of radiation exposure, but not only does the image resolution significantly deteriorate, but the effectiveness of diagnosis is reduced due to the generation of noise. Therefore, noise removal from CT images is a very important and essential processing process in the image restoration. Until now, there are limitations in removing only the noise by separating the noise and the original signal in the image area. In this paper, we aim to effectively remove noise from CT images using the wavelet transform-based GAN model, that is, the WT-GAN model in the frequency domain. The GAN model used here generates images with noise removed through a U-Net structured generator and a PatchGAN structured discriminator. To evaluate the performance of the WT-GAN model proposed in this paper, experiments were conducted on CT images damaged by various noises, namely Gaussian noise, Poisson noise, and speckle noise. As a result of the performance experiment, the WT-GAN model is better than the traditional filter, that is, the BM3D filter, as well as the existing deep learning models, such as DnCNN, CDAE model, and U-Net GAN model, in qualitative and quantitative measures, that is, PSNR (Peak Signal-to-Noise Ratio) and SSIM (Structural Similarity Index Measure) showed excellent results.

• Dementia and Neurocognitive Disorders
• /
• v.22 no.3
• /
• pp.100-108
• /
• 2023

Background and Purpose: The efficacy and safety of GV1001 have been demonstrated in patients with moderate-to-severe Alzheimer's disease (AD). In this study, we aimed to further demonstrate the effectiveness of GV1001 using subscales of the Severe Impairment Battery (SIB), which is a validated measure to assess cognitive function in patients with moderate-to-severe AD. Methods: We performed a post hoc analysis of data from a 6 month, multicenter, phase 2, randomized, double-blind, placebo-controlled trial with GV1001 (ClinicalTrials.gov, NCT03184467). Patients were randomized to receive either GV1001 or a placebo for 24 weeks. In the current study, nine subscales of SIB-social interaction, memory, orientation, language, attention, praxis, visuospatial ability, construction, and orientation to name-were compared between the treatment (GV1001 1.12 mg) and placebo groups at weeks 12 and 24. The safety endpoints for these patients were also determined based on adverse events. Results: In addition to the considerable beneficial effect of GV1001 on the SIB total score, GV1001 1.12 mg showed the most significant effect on language function at 24 weeks compared to placebo in both the full analysis set (FAS) and per-protocol set (PPS) (p=0.017 and p=0.011, respectively). The rate of adverse events did not differ significantly between the 2 groups. Conclusions: Patients with moderate-to-severe AD receiving GV1001 had greater language benefits than those receiving placebo, as measured using the SIB language subscale.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.67-76
• /
• 2024

Objectives: Direct reading instruments (DRIs) are widely used by industrial hygienists and other experts for preliminary survey and identifying source locations in many industrial fields. Photoionization detectors (PIDs), which are a form of hand-held portable DRIs, have been used for a variety of airborne vaporized chemicals, especially evaporated hydrocarbon solvents. The benefits of PIDs are high sensitivity between each chemical, competitive price, and portability. With the goal of increasing the accuracy of logged PID concentrations, previous studies have performed tests for the assessment of single chemical compounds, not mixtures. The purpose of this preliminary study was to measure mixtures with a PID and charcoal tube at the same time and compare the accuracy between them. Methods: A chamber test was implemented with different mixtures of hydrocarbon chemicals (acetone, isopropyl alcohol, toluene, m-xylene) and levels in the range of 14 to 864 ppm. Three PIDs and charcoal tubes were connected to the chamber and measured the chemical mixtures simultaneously. A comparison of accuracy and the PID group of concentrations with manufacture correction factor (M_CF) and field correction factor (F_CF) applied was performed. Results: The accuracy of the PID concentrations data-logged from the PID did not meet the accuracy criteria except for the mixture level B and C logged from PID No. 2, which was 18% of all tests for meeting accuracy criteria. The mean and standard deviation (SD) of concentration (ppm) of the charcoal tube followed by each mixtures' level were 10.37±0.26, 155.33±5.28, 300.80±11.65, and 774.93±22.65, respectively. When applying F_CF into the PID concentrations, the accuracy increased by nearly 82%. However, in the case of M_CF, none met the accuracy criterion. Between the PID there were differences of logged concentrations. Conclusions: In this preliminary study, the concentration of a logged PID with F_CF applied was a better way to increase accuracy compared to applying M_CF. We suggest that additional research is necessary to consider environmental factors such as temperature and humidity.