• Journal of the Korean Electrochemical Society
• /
• v.6 no.4
• /
• pp.236-241
• /
• 2003

Magnetic CoW thin film alloys were electrodeposited from citrate baths to investigate the resulting microstructure and magnetic properties. Deposit tungsten (W) content in the films electrodeposited at $70^{\circ}C$ were independent of current density, while coercivity decreased from hard $(H_{c,//}\~150\;Oe\;and\;H_{c.{\bot}}\;\~240\;Oe)$ to soft magnetic properties $(H_{c,//}\~20\;Oe\;and\;H_{c.{\bot}}\;\~30\;Oe)$ with increasing current densities from $10\;to\;100mA{\cdot}cm^2$, with deposit W content $(\~40\%)$ relatively unaffected by the applied current density. X-ray diffraction analysis indicated that hcp $Co_3W$ phases [(200), (201) and (220) planes] in the CoW films electrodeposited at $70^{\circ}C\;and\;10mA{\cdot}cm^{-2}$ were dominant, whereas amorphous CoW phases with small amount of hcp $Co_3W$ [(002) planes] were dominant with deposition at $70^{\circ}C\;and\;100mA{\cdot}cm^{-2}$. At intermediate current densities $(25\;and\;50mA{\cdot}cm^{-2}),\;hop\;Co_3W$ phases [(200), (002), (201) and (220)] were observed. The average grain size was measured to be 30 nm from Sheller formula. It is suggested that the change of the deposit coercivities in the CoW thin films electrodeposited at $70^{\circ}C$ is attributed to the change of microstructures with varying the current density. Nanostructured $Co_3W/amorphous-CoW$ multilayers were fabricated by alternating current density between 10 and $100 mA{\cdot}cm^{-2}$, varying the individual layer thickness. The magnetic properties of $Co_3W/amorphous-CoW$ multilayers were strongly dependent on the thickness of the alternating hard and soft magnetic thin films. The nanostructured $Co_3W/amorphous-CoW$ multilayers exhibited a shift from low to high coercivities suggesting a strong coupling effect.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2761-2764
• /
• 2011

A new Ruddlesden-Popper phase $NdSr_2MnCrO_7$ has been prepared by the standard ceramic method. The powder X-ray diffraction studies suggest that the phase crystallizes with tetragonal unit cell in the space group I4/mmm. The electrical transport properties show that the phase is an electrical insulator and the electrical conduction in the phase occurs by a 3D variable range hopping mechanism. The magnetic studies suggest that the ferromagnetic interactions are dominant.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.550-553
• /
• 1986

This paper presents a procedure for the time-scale separation and a design method for the sub-optimal composite regulator and Kalman filter of the large-scale discrete stochastic system with two time-scale properties. Provided that the fast sub-system is asymptotically stable, the reduced-order regulator and Kalman filter for the slow sub-system with dominant modes is designed as a sub-optimal regulator for the system.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.50-61
• /
• 2008

Environmental factors and phragmites growth properties at various habitats in Eulsukdo ecological park were investigated to understand major factors affecting phragmites distribution in constructed wetlands. Although phragmites is very important species in wetland ecosystem, it should be controlled to prevent excessive expansion within the restricted park area. The results showed that phragmites dominant sites have the highest LAI among other emerged plants habitats and could adversely affect for waders habitats. Phragmites were also found at the areas with wide ranges of water-depth than other plants, and showed phragmites could be favored for occupying the newly constructed wetlands like Eulsukdo ecological park. The results showed difference in soil redox potential between phragmites dominant and non-dominant sites. Because soil redox potential is affected by wetland hydrology like flooding duration, control of wetland hydrology should be considered for creation and management of constructed wetlands. The results also showed that differences in soil cation exchange capacity, soil salinity, soil organic matter content and site inclination between phragmites dominant and non-dominant sites as well as brackish and freshwater areas. Those abiotic factors can be important considerations for the sustainable wetland management especially for the phragmitest managements in the ecological park.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.3
• /
• pp.275-281
• /
• 2016

The aim of this study was to examine the selected soil chemical properties of paddy fields in different topographic areas to efficiently manage nutrient valances of the paddy fields in Jeonbuk Province. Three-hundred soil sampling sites in paddy fields were selected from the different topographic areas in Jeonbuk Province. The soil samples were collected every four years from 1999 to 2015. Soil pH and exchangeable K and Mg concentrations declined during the experimental periods. However, almost all the chemical properties were within the proper levels for paddy soil, except exchangeable Mg concentration. Distributed areas of the paddy fields with soil pH below 5.5 continuously increased, but the paddy fields with lower concentrations of soil organic matter and available $P_2O_5$ than the proper levels declined after 2007. In addition, the paddy fields with available $SiO_2$ below the proper concentration decreased from 83.3% of the total paddy fields studied in 1999 to 61.0% of the total fields investigated in 2015. The paddy fields with lower exchangeable K and Mg than the proper levels increased after 2003 whereas the fields with lower exchangeable Ca concentration decreased. Dominant landform of coastal and plain areas was fluvio-marine plains that was distributed in 53.7% and 40.9%, respectively. Local valley and fans was a dominant landform of mountainous and middle-mountainous areas, which was 51.8% and 67.6%, respectively. Dominant soil textures distributed in coastal and plain areas were silty loam and loam. Those in mountainous and middle-mountainous areas were sandy loam and loam, respectively. Soil pH was relatively higher in coastal area and the comparatively higher content of soil organic matter was found in costal area than other areas. The concentrations of available $P_2O_5$, exchangeable Ca, and exchangeable Mg were generally higher in mountainous, coastal, plain areas, respectively, but available $SiO_2$ and exchangeable K concentrations were not significantly different among the different topographic areas.

• Korean Journal of Environment and Ecology
• /
• v.21 no.4
• /
• pp.303-310
• /
• 2007

This study was carried out to investigate vegetation structure and soil properties of Tilingia tsusimensis population found to be distributed in Mt. Gaya and Mt. Keumo. The Tilingia tsusimensis population was classified as Tilingia tsusimensis-typical dominant population and Tilingia tsusimensis-Thalictrum uchiyamai dominant population. It was found out that the organic matter content in the distributed areas for Tilingia tsusiensis population was $25.0{\sim}32.3%$; content of nitrate nitrogen was $0.83{\sim}1.04%;\;5.58{\sim}20.76\;ppm$ for available phosphorous; $46.3{\sim}62.9$ for CEC, and 4.5 to 5.1 for soil pH. The results of the correlation between Tilingia tsusimensis population and environmental factor are as follows; the Tilingia tsusimensis-typical dominant population was found in the areas of low elevation and had somewhat high interchangeable Na, Ca, Mg and CEC among nutrients; on the other hand, Tilingia tsusimensis-Thalictrum uchiyamai-dominant population was found in the areas of somewhat higher elevation and had a little lower interchangeable Na, Ca, Mg and CEC among nutrients than those of the Tilingia tsusimensis-typical dominant population.

• Journal of Ecology and Environment
• /
• v.44 no.2
• /
• pp.62-71
• /
• 2020

Understanding vegetation structure and the relationship with environmental factors has been crucial for restoration and conservation of riparian zones. In this study, we conducted field survey in a riparian zone of Namhan River in South Korea both before and after flooding in order to understand temporal and spatial variations of riparian vegetation. There were significant temporal and spatial variations in species composition, and distribution patterns of vegetation were different along a gradient of elevation above the water level. At low elevation, Zizania latifolia was dominant throughout the field survey periods, and Bidens frondosa began to grow late and dominated both in post-flooding 1 and 2. Prior to flooding, Scirpus radicans and Polygonum thunbergii were widely distributed at middle elevation, while Artemisia vulgaris, Phragmites australis, and Miscanthus sacchariflorus were dominant at high elevation. After flooding, P. thunbergii was dominant at middle elevation with most other species decreasing, and more invasive or pioneer plants, including Artemisia princeps, H. scandens, and Sicyos angulatus, were observed at high elevation. Species composition and distribution patterns were homogeneous at low elevation, whereas dynamic variations of vegetation were observed both temporally and spatially at higher elevations. Elevation and distance from the water front were the most principal factors governing vegetation structure. Furthermore, soil physicochemical properties were also found to determine species composition and distribution patterns. These results indicate that vegetation structure in the riparian zones is formed by the combined effects of hydrological regime and soil physicochemical properties, inherent characteristics of species, and interspecific competition. Understanding of temporal and spatial variations of riparian vegetation may provide useful insights into ecological restoration and conservation of the vegetation within the riparian zones.

• Carbon letters
• /
• v.15 no.2
• /
• pp.125-128
• /
• 2014

In this study, the effect of stacking sequence on the flexural and fracture properties of carbon/basalt/epoxy hybrid composites was investigated. Two types of carbon/basalt/epoxy hybrid composites with a sandwich form were fabricated: basalt skin-carbon core (BSCC) composites and carbon skin-basalt core (CSBC) composites. Fracture tests were conducted and the fracture surfaces of the carbon/basalt/epoxy hybrid composites were then examined using scanning electron microscopy (SEM). The results showed that the flexural strength and flexural modulus of the CSBC specimen respectively were ~32% and ~245% greater than those of the BSCC specimen. However, the interlaminar fracture toughness of the CSBC specimen was ~10% smaller than that of the BSCC specimen. SEM results on the fracture surface showed that matrix cracking is a dominant fracture mechanism for the CSBC specimen while interfacial debonding between fibers and epoxy resin is a dominant fracture process for the BSCC specimen.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.283-283
• /
• 1999

In the present study, the effect of microporosity on the tensile properties of as-cast AZ91D magnesium alloy was investigated through experimental observation and numerical prediction. The test specimens were fabricated by die-casting and gravity-casting. For gravity-casting, the inoculation and use of various metallic moulds were applied to obtain a wide range of microporosity. The deficiency of the interdendritic feeding of the liquid phase acted as d dominant mechanism on the formation of the micropores in the Mg-Al-alloys, rather than the evolution of hydrogen gas. Although tensile strength and elongation has a nonlinear and very intensive dependence upon microporosity, the yield strength appeared to have a linear relationship with microporosity. However, it was possible to quantitatively estimate the linear contribution of microporosity on the individual tensile property far a range of microporosity, which was below about B %. The numerical prediction suggests that the effect of microporosity on fractured strength and elongation decreased as the strain hardening exponent increased. Furthermore. the shape and distribution of micropores may play a more dominant role than local plastic deformation on the tensile behavior of AZ9lD alloy.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.3
• /
• pp.71-75
• /
• 2008

This paper illustrates haw $Y_2O_3$ contributes to crack-healing strengths as a function of crack-healing temperature and the additive amount. In investigating mechanical properties, the indentation fracture method is very simple and useful, but careful attention must be paid to the statistical data processing because data may be scattered excessively, especially for brittle materials. To estimate accurate AE signal properties we applied the useful time-frequency method with a discrete wavelet analysis algorithm. In experiments, three kinds of specimens were prepared. After the specimens were indented by a Vickers indentor, they were heat-treated and crack-healed to evaluate bending strength and the AE signal. With higher amounts of the additive powder, as 1, 3, or 5% wt. of $Y_2O_3$, the concentrative tendency of dominant frequency trended toward lower frequency groups. The $Al_2O_3$ ceramic with 3% wt. of $Y_2O_3$ was judged most suitable because it demonstrated superior crack-healing ability and relative concentration on the highest frequency group.