• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1685-1696
• /
• 1994

In this paper, a new forming process of the large-size forgings within the limit of forming loads is developed by introducing the incremental forging method and combined forming method. For the development of the forming process, various related processes are proposed and modelling experiments of plasticine and corresponding numerical simulation ate carried out. Thus, an optimal process considering the productivity and economical efficiency is recommended from the study of formability and forming loads, etc. The selected process is subjected to a modelling experiment of lead and 1/7 scale prototype experiment of the real material so as to verify the effectiveness of a selected process as well as to determine the design parameters. The developed process is then applied the forging product of dome shape. Dome-shaped forgings can be produced by the developed process within the limit loads and with the simple tools.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.531-534
• /
• 2008

A new forming process of the large-size forging within the limit of forming loads is developed by introducing the drawing process, which usually used to apply to sheet forming. For the development of the forming process, corresponding numerical simulation are carried out. The approach is based on the Taguchi method, and utilize the DOE for design of FEM analyses. In this study, the important factors are chosen at first, and then the concept of signal-to-nose(S/N) rate is applied to evaluate the formability of large size forging-products, and each value of the design parameter is determined.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.106-115
• /
• 2007

In this study, first, child headform model was built up, satisfying requirement in the headform validation test. Also, for decreasing both acceleration peak and deformation, a new hood with dome shaped forming in inner panel was investigated. Next, headform impact, complying with draft of EEVC W/G 17, on the central portion of the newly proposed hood were simulated for a steel hood and three aluminum hoods with different thickness for examining the material and thickness effect on HIC value and inner panel deformation. The analysis results explained that aluminum hoods with dome shaped forming in inner panel were highly promising not only for meeting headform safety regulations but also for leading to weight savings. Finally, hood edge design technology in order to reduce pedestrian injury due to the high stiffness of beam type edge and the rigid support, was discussed. Various types of the foam filled edge were designed and their headform safety performance were evaluated. The edge structure with foam filled in upper one third of section exhibited excellent results.

• 소성∙가공
• /
• 제12권8호
• /
• pp.718-723
• /
• 2003

Tn order to develop springback control technology for high-strength steel sheets, several studies have been conducted: dome stretching test, stepped s-rail forming and springback measurement, and optimally shaped initial blank design. First, to find out the formability of TRIP60, dome stretching test was performed. Next, the stepped s-rail die, which was designed to form a channel type panel with large twist and wall curl, was manufactured and used to evaluate the effect of controlling forming variables, such as blank holding force and flange amount on the springback. Furthermore, new measurement method of the springback was introduced to define wall curl and twist in geometrically complex panels. Finally, the optimally shaped initial blank was employed to verify one of the best ways to control the springback in channel type. high-strength sheet panels.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 제4회 박판성형 심포지엄
• /
• pp.35-40
• /
• 2003

In order to develope springback control technology for high-strength steel sheets, some studies have been conducted: dome stretching test, stepped s-rail forming and springback measurement, and optimally shaped initial blank design. First, to find out the formability of TRIP60, dome stretching test was performed. Next the stepped s-rail die, which was designed to form a channel type panel with large twist and wall curl, was manufactured and used to know the effect of controlling forming variables, such as blank holding force and flange amount on the springback. Furthermore, new measurement method of the springback was introduced to define wall curl and twist in geometrically complex panels. Finally, the optimally shaped initial blank was employed to verify one of the best ways to control the springback in channel type, high strength sheet panels.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.374-377
• /
• 2008

Magnesium alloy sheets are usually formed at temperatures between $150^{\circ}C$and $300^{\circ}C$ because of their poor formability at room temperature. In the present study, the formability of AZ31B magnesium alloy sheets was investigated by the analytical and experimental approaches. First, tensile tests and the limit dome height test were carried out at elevated temperatures to get the mechanical properties and forming limit diagram, respectively. And then deep drawing of cross shaped die was tried to get the minimum corner radius and forming limit at specific temperature. Blank shape, punch velocity, minimum corner radius, fillet size, etc, were determined by finite element analysis physical try-outs. Especially, optimum punch and die temperature were suggested through the temperature-deformation analysis using Pam-stamp.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.66-70
• /
• 2008

In this study, the formability of AZ31B magnesium alloy sheets was investigated by the analytical and experimental approaches. Tensile tests and limit dome height tests were rallied out at several temperatures between $25^{\circ}C$ and $300^{\circ}C$ to obtain the mechanical properties and forming limit diagram (FLD). The FLD-based criterion considering the strain-path and the blank temperature was used to predict the forming limit in a deep-drawing process of cross-shaped cup by finite element analysis. This criterion proved to be very useful in determining the optimal process conditions such as blank shape, punch velocity, minimum comer radius, fillet size, and so on, through the comparison between FEA and experimental data. In particular, the temperature of each tool that provided the best formability of the blank was determined by coupled temperature-deformation analyses. A practical method that can greatly reduce the forming time by increasing the punch speed during the forming process was suggested.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제49권4호
• /
• pp.233-238
• /
• 2023

Schwannomas exhibit histopathological variation that leads to diagnostic dilemmas, although less frequent in the oral cavity. We describe a case with unique histopathology and no relevant clinical history that adds to the breadth of literature on the diversity presented by Schwannoma. A 60-year-old female patient presented with a small dome-shaped, asymptomatic swelling on the alveolar ridge 6 years in duration. Histopathologically, it showed rich cellular pathology with a unique arrangement of tumor cells forming irregular rosettes. Each rosette presented with a central core of fibrin-collagenous material and the tumor cells were arranged on the periphery, exhibiting epithelioid change with evidence of mild cellular and nuclear pleomorphism. On immunohistochemical evaluation, the cells were strongly and diffusely positive for S-100 and negative for Ki-67. A diagnosis of benign Schwannoma with a rosette-like arrangement with epithelioid change was made. The case report emphasizes the risk of misdiagnosis and the importance of awareness regarding rare histopathological variants of Schwannoma.

• 한국약용작물학회지
• /
• 제11권2호
• /
• pp.122-126
• /
• 2003

겨우살이 기생위치는 숙주목(상수리나무 등)의 종류에 관계없이 대부분 지면에서 5-10m높이의 일사량이 많은 상단부에 기생하였다. 줄기의 분화는 주경에서 2개씩 연속분지를 형성하였고, 잎은 정단줄기의 상단부에 2매씩 대생하였으며, 종실은 연황색의 7-8mm 크기의 장과였다. 겨우살이 화아분화는 초기 둥근 돔형의 화아정단이 형성되고 엽원기가 1, 2매 차례로 분화한 다음 심장형으로 발달하며 악편이 발생하였는데, 중앙부에서 먼저 진행되었고 이어 양측 면에 2개를 형성하였다. 잎은 이면의 표피 2-3층 아래에 기공과 공변세포가 관찰되었고, 겨우살이는 기주목의 흡착부에서 기주조직의 코르크층을 통과하여 목질부에 뿌리를 내리고 여러 갈래로 분지하여 생장하는 것을 확인하였다.

• 원예과학기술지
• /
• 제32권5호
• /
• pp.623-627
• /
• 2014

Curcuma alismatifolia 'Chiangmai Pink'의 화아발달 과정을 SEM을 통해 관찰하였다. 쿠르쿠마 근경에서 자란 맹아의 발육정도에 따른 화아분화 과정과 단계별 화아분화의 형태적 특성은 정식 후 식물체의 싹이 15-20cm 가량 자랐을때 생장점의 중앙부가 돔형으로 비대되는 경정분열조직에서 포엽이 분화되기 시작하였다. 포엽이 5-7매 가량 분화되면 포엽과 포엽 사이에서 화아가 형성되기 시작하였고, 보통 포엽당 화아는 4-6개가 관찰되었다. 화아가 분화되는 순서는 맨 하위 포엽 내 존재하는 것부터 상부로 올라가면서 하나씩 분화되었고 상부의 것이 분화되면 다시 하부의 4-6개의 화아 중 또 다른 화아가 상부쪽으로 향하면서 하나씩 순차적으로 되었다.