• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.4
• /
• pp.190-197
• /
• 2000

Anions such as C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, P $O_4$$^{3-}$, and organic anions, that do not become a part of the clay mineral crystal lattice, are of considerable interest in soils which are a potential sink caused by acid rain. In this paper, elution of native sulfate and breakthrough curves (BTC) were obtained from miscible displacement of non-specifically or specifically adsorbed anions through non-saturated or saturated Bt soil of Chungwon series. The shape and position of the BTC's could be affected by adsoprtion and ion exchange onto the soil particle surfaces. Measured BTC's for oxalic acid under unsaturated and saturated conditions showed that less pore volumes were required to displace the native S $O_4$$^{2-}$S from the soil column, and that maximum detection limit of oxalic acid reached earlier than under unsaturated. The retarded BTC's to the righthand side could be attributed by different adsorption behavior of each anion, although BTC's may be influenced by the smaller order of velocity change. The alternate breakthrough and elution curves show the rapid approach to the maximum detection limit of C/Co = 1, compared to progressive tailing of elution curve to reach to C/Co = 0. The probable explanation for asymmetric elution patterns for both anion is that the anion was selectively adsorbed on the positively charged soil surface from the solution passing in the soil column. On the other hand, the variations of pH in effluent showed that pH was increased to 7 in the first 6 pore volume and then gradually decreased to pH 4.

• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.251-260
• /
• 2004

The feasibility and stability of ORP, pH(mV) and DO as a real-time control parameter for SBR process were evaluated in this study. During operation, NBP(nitrogen break point) and NKP(nitrate knee point), which reveal the biological and chemical changes of pollutants, were clearly observed on ORP and pH(mV)-time profiles, and those control points were easily detected by tracking the moving slope changes(MSC). However, when balance of aeration rate to loading rate, or to OUR(oxygen uptake rate), was not optimally maintained, either false NBP was occurred on ORP and DO curves before the appearance of real NBP or specific NBP feature was disappeared on ORP curve. Under that condition, however, very distinct NBP was found on pH(mV)-time profile, and stable detection of that point was feasible by tracking MSC. These results might mean that pH(mV) is superior real-time control parameter for aerobic process than ORP and DO. Meanwhile, as a real-time control parameter for anoxic process, ORP was very stable and more useful parameter than others. Based on these results, a stable real-time control of process can be achieved by using the ORP and pH(mv) parameters in combination rather than using separately. A complete removal of pollutants could be always ensured with this real-time control technology, despite the variations of wastewater and operation condition, as well as an optimization of treatment time and capacity could be feasible.

• Journal of Sensor Science and Technology
• /
• v.19 no.1
• /
• pp.8-16
• /
• 2010

This research proposes measuring of BCG(ballistocardiogram) to monitor heart activities in a non-constrained environment, at home or work. Unlike with ECG, measuring BCG does not require the attachment of leads on the subject's body and allows signal measuring in a non-constrained state. It enables effective long-term monitoring of cardiac conditions. In this study a chair type BCG measurement system to continuous monitor the activity of the heart is implemented. The instrument consists of upper petal and ready for press of chair load cell sensor is attached to measure the change of the object's weight. In order to extract the output ballistic signal from the weight and force sensor signals. Beside the signal processing circuit for the digital conversion, the ballistic signal is detected using DAQ equipment. Signal processing algorithm including wavelet transforms for noise cancellation, template matching for normalization and peak detection in BCG is developed. ECG and BCG were concurrently measured to evaluate the performance of the system, and comparing the characteristics of the two signals verified the possibility of the system in non-constrained and nonconscious health monitoring.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1636-1639
• /
• 2005

The process equipment and remote handling for the deep geological disposal of high-level radioactive waste(HLW) should be checked prior to the operation in view of reliability and operability. In this study, the concept of virtual environment workcell is implemented to analyze and define the feasible disposal process instead of real mock-up, which is very expensive and time consuming. To do this, the parts of process equipment for the disposal and maintenance will be modeled in 3-D graphics, assembled, and kinematics will be assigned. Also, the virtual workcell for the encapsulation and disposal process of spent fuel will be implemented in the graphical environment, which is the same as the real environment. This virtual workcell will have the several functions for verification such as analyses for the equipment's work space, the collision detection, the path planning and graphic simulation of the processes etc. This graphic virtual workcell of the HLW disposal process can be effectively used in designing of the processes for the hot cell equipment and enhance the reliability of the spent fuel management.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.285-291
• /
• 2008

A global binding agreement was adopted with the leading of United Nations Environment Program (UNEP) on May 22, 2001 in Stockholm to regulate the production and distribution on persistent organic pollutants (POPs). The agreement took effectuation with the ratification of 59 countries from the approval of 151 countries on May 17, 2004. After the approval on October 4, 2001, South Korea performed systematical investigation on POP-related substances such as chlordane, dichloro diphenyl trichloroethane (DDT), hexachlorobenzenes (HCB), heptachlor, polychlorinated biphenyls (PCBs) to get ready for the ratification of the convention with country-specific exemption. The domestic distributions of those chemical substances have been officially prohibited since the late 1960s to the early 1980s. Although there were occasional reports for the detection of some of those chemical substances, those performed minute signification in their existence in the environment. A series of investigation with documentary examination and fact-finding survey showed the possibility for the ratification on the convention without country-specific exemption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2479-2487
• /
• 2009

Earlier researches on Sensor Networks preferred symmetric key-based authentication schemes in consideration of limitations in network resources. However, recent advancements in cryptographic algorithms and sensor-node manufacturing techniques have opened suggestion to public key-based solutions such as Merkle tree-based schemes. This paper proposes a new concept of public key-based authentication using Polynomial Secret Sharing that can be effectively applied to sensor networks and a detection of malicious node using the hash function. This scheme is based on exponential distributed data concept, a derivative from Shamir's (t,n) threshold scheme, in which the authentication of neighbouring nodes are done simultaneously while minimising resources of sensor nodes and providing network scalability.

• Journal of Integrative Natural Science
• /
• v.8 no.2
• /
• pp.128-134
• /
• 2015

This paper focuses on the applicability of a continuous monitoring method on trace sulfur compounds in the ambient air by TD and GC/PFPD. The target compounds for monitoring include H2S(hydrogen sulfide), Methyl mercaptan, Dimethyl Sulfide, and Dimethyl disulfide. The result of QA/QC on monitoring instruments satisfies all the standards of Odor Measurement and Analysis Method, showing that the reproductivity of the compounds by concentration is within 10%, linearity is above 0.98 of a correlation efficient, method detection limit is 0.16 ppb by MM standard, and recovery rate is over 70%. Monitoring was conducted for two years from March 2006 to February 2008. As a result of the monitoring, the average concentration of H2S was 0.08 ppb, with the maximum concentration at 16.15 ppb. The result indicates that it is reasonable to do continuous monitoring as there appears a spontaneous event of high concentration by the condition of the site during monitoring odor-causing substances. Therefore, it is suggested that the continuous monitoring method used in this paper is appropriate to identify the characteristics of sudden occurrence and concentration variations of sulfur compounds.

• Biomedical Science Letters
• /
• v.7 no.3
• /
• pp.103-110
• /
• 2001

$\alpha$-Fetoprotein(AFP) is a good marker for the detection of several diseases such as hepatocellular carcinoma, gonadal germ cell tumor, gastric tumor, and Down's syndrome. In this study, we developed ELISA, using synthetic peptides corresponding to the epitopes of AFP. Five kinds of peptides were synthesized from AFP to produce antibodies in rats that recognize AFP in human plasma as well as amniotic fluid and do not cross-react with serum albumin. All five kinds of antibodies showed good reactivities with their peptide-keyhole limpet hemocyanin conjugates. Anti-synthetic peptide 1 (R-N-E-Y-G-I-A-S-I-L, 4-13) antibody, in particular, reacted well with AEP as well as synthetic peptide 1-KLH but not with human serum albumin. The binding affinity(Kd) was 2.7$\times$10$^{-9}$M for peptide 1 and 6.8$\times$10$^{-8}$M for AEP. The range for measurement of AFP was 10~1,000 ng/ml. The within-assay and between-assay coefficients of variance(CV) were 4.83% and 10.97%, respectively. In a sample of 31 sera and 33 amniotic fluids, there was a good correlation between AFP values determined in this assay and those in a commercial kit. These results indicate that the antibodies against synthetic peptides corresponding to the epitopes of AFP are highly specific to APP and synthetic peptide-based ELISA would be useful for the measurement of human AFP.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.1
• /
• pp.69-76
• /
• 2006

Telematics, which is a compound word of a telecommunication and informatics, provides drivers with useful driving information such as driving path guidance, accident or robbery detection, traffic conditions and other valuable data at real time. This paper proposes and implements how to build a telematics terminal equipped with CDMA and GPS running embedded Linux, to check a vehicle's state through communication between telematics server and vehicle terminals using a cellular phone and to control a vehicle using SMS as shown in Figure 1. In order to do this, we use the SK-VM platform which is mobile terminal platform based on JAVA to design, implement and evaluate it.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.3
• /
• pp.274-282
• /
• 2011

This paper is focused on dynamic modeling and control system design as well as vision based collision avoidance for multi-rotor unmanned aerial vehicles (UAVs). Multi-rotor UAVs are defined as rotary-winged UAVs with multiple rotors. These multi-rotor UAVs can be utilized in various military situations such as surveillance and reconnaissance. They can also be used for obtaining visual information from steep terrains or disaster sites. In this paper, a quad-rotor model is introduced as well as its control system, which is designed based on a proportional-integral-derivative controller and vision-based collision avoidance control system. Additionally, in order for a UAV to navigate safely in areas such as buildings and offices with a number of obstacles, there must be a collision avoidance algorithm installed in the UAV's hardware, which should include the detection of obstacles, avoidance maneuvering, etc. In this paper, the optical flow method, one of the vision-based collision avoidance techniques, is introduced, and multi-rotor UAV's collision avoidance simulations are described in various virtual environments in order to demonstrate its avoidance performance.