• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.340-343
• /
• 2007

To effectively manage a electric lamp on a remote place, it is required to identify a status of the lamp or the place. however, since there is no methods to notify the status of sensor to the central management system in a lamp system based on the non-networked sensor, it is difficult to manage the lamps remotely. In this paper, we propose the lamp management system to acquire the various status informations of lamps using more than two sensors. To get the status remotely, the system exploits a wireless network based on the ZigBee. The benefit of this system is to help the efficient decision makings of administrators.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.69-72
• /
• 2003

In this paper new control strategy of series resonant converter system for control power supply is suggested. Frequency controlled series resonant converter system is robust to load variations because it is POSR(parallel output series resonant) type. And it provides stable output voltage by changing switching frequency to input voltage variations. Firstly, operation analysis about suggested series resonant converter system was carried. Then simulations using ACSL(Advanced Continuous Simulation Language) and experiments to actual system were carried to prove characteristics of suggested system.

• Journal of Broadcast Engineering
• /
• v.24 no.7
• /
• pp.1221-1227
• /
• 2019

This paper describes a low-density parity-check (LDPC) coded index modulated orthogonal frequency division multiplexing with quasi-orthogonal sequence (IM-OFDM-QOS) and provides performance evaluations of the proposed system. By using QOS as the spreading code, IM-OFDM-QOS scheme can improve the reception performance than IM-OFDM-SS scheme for a given data rate. On the other hand, LDPC code is widely used to the latest wireless communication systems as forward error correction (FEC) scheme and has Shannon-limit approaching performance. Therefore, by applying LDPC code to IM-OFDM-QOS system as FEC scheme, the reception performance can be further improved. Simulation results show that significant signal-to-noise ratio (SNR) gains can be obtained for LDPC coded IM-OFDM-QOS system compared to the LDPC coded IM-OFDM-SS system and the SNR gain increases with the higher code rate.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.567-570
• /
• 2005

Recently, as mobile paradigms such as telematics or LBS (Location Based Service) have been being more diverse and mobile devices such as PDA (Personal Digital Assistance) or several telematics terminals have been being used more widely, mobile services, for example, mobile geographic information service have been being put more importance by people. In this paper, we propose to adopt S/W and data streaming mechanism as a method to improve performance of mobile geographic information service which is a representative of mobile services based on client-server architecture. The show the effectiveness of proposed methods, we design and implement S/W streaming prototype system and sample mobile geographic information service to be executed on the S/W streaming system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5377-5391
• /
• 2017

In this paper, we propose a new scheme to suppress the narrowband interference (NBI) in OFDM-based systems. The scheme utilizes code division multiple access (CDMA) and weighted-type fractional Fourier transform (WFRFT) domain preprocessing technologies. Through setting the WFRFT order, the scheme can switch into a single carrier (SC) or a multi-carrier (MC) frequency division multiple access block transmission system. The residual NBI can be eliminated to the maximum extent when the WFRFT order is selected properly. Final simulation results show that the proposed system can outperform MC and SC with CDMA and frequency domain preprocessing in terms of the narrowband interference suppression.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.199-200
• /
• 2009

최근 유비쿼터스란 단어가 사회 전반에 걸쳐 새롭게 부각됨에 따라 시간과 공간의 제약에서 벗어난 사용자 중심의 서비스가 제공되고 있다. 이러한 활발한 진행 속에 센서와 네트워크 기술의 발달로 언제, 어디서나 센서들이 무선 네트워크로 상호 통신 할 수 있는 유비쿼터스 센서 네트워크의 활용이 더욱 높아지고 있다. 본 논문에서는 이러한 유비쿼터스 센서 네트워크를 전시관 관리에 활용함으로써 능동적인 전시관 관리 시스템을 설계 및 구현해 보고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.478-481
• /
• 2013

a본 논문에서는 스마트폰에 내장된 카메라를 이용하여 원격지의 장면을 고해상도로 촬영한 영상을 실시간으로 감시할 수 있는 시스템을 제안한다. 이 시스템은 영상 촬영의 이동성을 주기 위해 다양한 가격과 종류로 출시되어 있는 무선조종자동차에 스마트폰을 탑재시킨다. 무선조종자동차의 원격 제어는 키넥트의 음성 및 제스처 인식 기능을 활용하여 비접촉성 제어입력이 가능하도록 사용자 인터페이스를 제공한다. 이 시스템은 손이나 몸짓이 불편한 환자 또는 작업 중인 작업자가 원격지의 영상을 보아야하는 경우 다양한 형태로 활용될 수 있을 것이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.39-45
• /
• 2011

The processes for manufacturing a product differ depending on the characteristics of the product, and the information used or generated by the processes also varies. To implement a flexible and configurable Manufacturing Execution System (MES), a Data Acquisition System (DAS) that takes into consideration the characteristics of the manufacturing system is required. In this study, we design an information acquisition system that can process the information on equipments of a shop floor in real-time and that is adaptive to the changes in the shop floor. The system has a data parser module for flexible processing of the equipment status, a data mapper module to link the equipment status with a manufacturing process, and an SOA-based data integration module to transmit the processed information to other information systems such as MES and ERP. From the results of pilot study, its maintenance is easy even if new equipment or new manufacturing processes are adopted or if the equipments are rearranged.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.3
• /
• pp.79-86
• /
• 2006

Especially, MTO(Make-To-Order) companies take collaborative approaches with their partner companies to make low-price products and/or technologically low intensive products. The collaborative approach to manufacturing requires collaboration with partner companies for inventory review, production plan, and manufacturing to fulfill customer's orders. However, frequent changes of partnerships binder partner companies from sharing production information in effective ways since their information systems have different data architectures and platforms. Therefore, it is required flexible and standardized system integration approach fir effective information sharing. This research studies current status and problems of collaborative production system, proposes an architecture for collaborative production systems based on Web Services which is a standard information technology, and discusses expected effects and the vision of Web Services.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.40-44
• /
• 2003

In this paper, a PC-based virtual measuring program for efficiency analysis of DC-DC converter is developed. Furthermore, a newly developed, highly accurate and reliable data acquisition system for DC-DC converter is presented. The virtual measuring system consists of two different types of monitoring and measuring system. Also, this paper give a full explanation for a LabVIEW realization of the measuring system for DC-DC converter.