• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.18 no.2
• /
• pp.157-166
• /
• 2014

If there are metals located in the X-ray scanned object, a point outside the metals has its range of projection angle at which projections passing through the point are disturbed by the metals. Roughly speaking, this implies that attenuation information at the point is missing in the blocked projection range. So conventional projection completion MAR algorithms to use the undisturbed projection data on the boundary of the metaltrace is less efficient in reconstructing the attenuation coefficient in detailed parts, in particular, near the metal region. In order to overcome this problem, we propose the algebraic correction technique (ACT) to utilize a pre-reconstructed interim image of the attenuation coefficient outside the metal region which is obtained by solving a linear system designed to reduce computational costs. The reconstructed interim image of the attenuation coefficient is used as prior information for MAR. Numerical simulations support that the proposed correction technique shows better performance than conventional inpainting techniques such as the total variation and the harmonic inpainting.

• Journal of the Korean Regional Science Association
• /
• v.11 no.1
• /
• pp.79-91
• /
• 1995

As an exit to solve the economic depression of the development countries in the early twentieth century, the 'old international division of labor' developed. The economic crisis(i.e., under-consumption crisis) was due to the absence of the mode of regulation compatible with the extensive regime of accumulation(i.e., "Fordist" regime). The crisis was solved by the state intervention through the creation on institutions in order to increase the level of consumption. Until the late 1960s when "high Fordism" reached(i.e., a harmonious relation between the monopoly mode of regulation and the intensive accumulation of capital), the developed core countries enjoyed a remarkable economic growth. The external market was not a necessity for the economic growth because there were increases in labor productivity and proportional increases in real wages and thus increases in consumption level. In the 1970s, however, the core faced with economic crisis again. Due to the breakdown of the postwar "Fordist" regime of capital accumulation and the post 1973 world depression, the core needed the Third World as a solution for their internal and international economic crisis. Thus the 'new international division of labor'(NIDL) arose. The "Fordist" method of production(i.e., the divisions of production process) led to the territorial division of labor and to the detailed division of labor. The aim of the NIDL is to exploit reserve armies of labor on a world scale and thus to reduce production costs. According to the NIDL model, the Third World countries have been developing by the core countries' investment on mainly labor-intensive industries and thus have been playing an important role in the global economy. And the NIDL theorists argue that multinational corporations have increasingly invested in the Third World nations and contributed to the economic growth in those regions. Tables presented in the paper show that the global trend since the 1970s does not follow the argument exactly as the NIDL theorists predicted. On the contrary, the core countries focus on developing technology, adopting the automation of production process, and trading within the core countries rather than on investing in the periopheral countries. The continuing investment of multinational corporations into the periphery is not because of cheap labor force but because of the market potentials in the regions. Majority of corporations of the core tries to reduce production costs by investing in technological development more intensively and also by changing regional strategies (i.E., investment from metropolitan areas to medium - or small - size cities, focusing on agglomeration economy, boosting regional diversification, etc.) within their own countries. The main purpose of the paper is to review and to criticize the NIDL theory based on some empirical data.IDL theory based on some empirical data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.543-551
• /
• 2014

This study has searched to find a program in order to manage simply and practically use the expelled AtoN database from the AtoN Simulator and to support the idea decision for the AtoN placement. It examines a program that manages AtoN database through the hierarchy structure, history card and endowment with condition same as a scenario. And accomplishes this study's goal owing to realizing AtoN operational software that helps for visual, hearing sense, fixed amount verification upon AtoN placement project. The AtoN operational software contributes not only flexible control like a newly establishment, relocation etc, but also supports idea decision for AtoN placement plan through many functions such as condition search, virtual sailing and fixed amount appraisal result exhibition, etc. Through utilization of this, it is to help upon the presupposition of the impact to ship or sailor about many designs and in addition, upon the judgment of whether or not for the efficiency and appropriation of the design. It is expected to reduce possible failure costs and management costs due to AtoN design and placement plans, because to compare more various designs thru the easier verification method.

• Safety and Health at Work
• /
• v.14 no.4
• /
• pp.406-414
• /
• 2023

Background: This study examined age-group differences in the rate, severity, and cost of injuries among construction workers to support evidence-based worker safety and health interventions in the construction industry. Methods: Ohio workers' compensation claims for construction workers were used to estimate claim rates and costs by age group. We analyzed claims data auto-coded into five event/exposure categories: transportation incidents; slips, trips, and falls (STFs); exposure to harmful substances and environments; contact with objects and equipment (COB); overexertion and bodily reaction. American Community Survey data were used to determine the percentage of workers in each age group. Results: From 2007-2017, among 72,416 accepted injury claims for ~166,000 construction full-time equivalent (FTE) per year, nearly half were caused by COB, followed by STFs (20%) and overexertion (20%). Claim rates related to COB and exposure to harmful substances and environments were highest among those 18-24 years old, with claim rates of 313.5 and 25.9 per 10,000 FTE, respectively. STFs increased with age, with the highest claim rates for those 55-64 years old (94.2 claims per 10,000 FTE). Overexertion claim rates increased and then declined with age, with the highest claim rate for those 35-44 years old (87.3 per 10,000 FTE). While younger workers had higher injury rates, older workers had higher proportions of lost-time claims and higher costs per claim. The total cost per FTE was highest for those 45-54 years old ($1,122 per FTE). Conclusion: The variation in rates of injury types by age suggests that age-specific prevention strategies may be useful.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.490-494
• /
• 2017

With increasing the number of vehicles, the accident rate also goes up and the damaged vehicles should be painted as a final repair process. At the painting stage the solvent-based paint causes environmental problems. To overcome these problems waterborne refinish paint is frequently used recently. However, for waterborne refinish, the costs of insurance coverage are too expensive, and insurance reimbursement costs could be burdensome. Because of the high price of aquatic paint treatment, the service shop might charge the malicious service price. In this study, the surfactant of Surfynol 104, which is the component in the paint, was used as an indicator whether the vehicle was painted with waterborne paint. The specimen was quantitatively analyzed to contain 0.38% of the surfactant through the standard addition method with isotope substituted internal standard (IS) of fluranthene-d10 by curie point pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS).

• Journal of Mushroom
• /
• v.17 no.1
• /
• pp.7-11
• /
• 2019

We assessed the growth characteristics of Auricularia polytricha 'Geoni' cultivated in a simple greenhouse constructed of polyethylene (PE) without air conditioning (high temperature) and in an air conditioned mushroomhouse. The successful cultivation of A. polytricha 'Geoni' at high temperatures can reduce energy and facility investment costs. The comparison of growth characteristics of the fungi grown under the different temperature conditions revealed that fruit bodies were larger in the higher temperature condition, but were brighter in the lower temperature condition. Additionally, fruit body physiology was found to be not affected by temperature. In the PE greenhouse, the fresh weight of fruit body was higher in mid-June and early July. Therefore, it was possible to effectively control the growth period of the mushrooms during a high-temperature period. The findings indicate the potential to cultivate A. polytricha 'Geoni' in a simple PE greenhouse that is not cooled in summer, thus reducing energy costs.

• Journal of Korean Society of Forest Science
• /
• v.105 no.4
• /
• pp.441-448
• /
• 2016

The purpose of this study was to broaden our knowledge on the productivity and costs of felling operation in three different harvesting methods(whole tree, tree-length and cut-to-length). Felling was conducted in three different harvesting methods with two workers who have different work experiences. Worker A and B have had felling experiences for about 5 years and 15 years, respectively. Felling productivity in whole tree method was $10.3m^3/SMH$ for worker A and $12.7m^3/SMH$ for worker B. Felling costs for worker A and B were $2,066won/m^3$ and $2,201won/m^3$, respectively. Although felling productivity of worker B in whole tree method was higher than worker A, felling costs of worker A were similar to worker B because the wage of worker B was more expensive than the wage of worker A (p>0.05). In tree-length method, felling cost of worker B were cheaper than that of worker A. Felling productivity and cost in tree-length method were $2.2m^3/SMH$ and $9,890won/m^3$ for worker A and $3.3m^3/SMH$ and $8,459won/m^3$ for worker B, respectively (p<0.05). In cut-to-length method, felling productivity and cost were $2.3m^3/SMH$ and $9,584won/m^3$ for worker A and $3.0m^3/SMH$ and $9,395won/m^3$ for worker B, respectively. Felling productivity of worker B was higher than that of worker A(p>0.05). Our preliminary results found that harvesting methods and worker's experiences highly affect on the productivity and costs of felling operations. These results should be useful for forest managers when planning cost-effective harvesting operations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.152-154
• /
• 2018

Inland Container Depot is regarded as an important link in the multimodal transport, contributing to reduce transportation costs, reduce the time saved at the port, with the main function of clearing domestic goods, empty containers and refrigerated containers, super cargo. Inland Container Depot has just used in the South of Vietnam in recent years which are starting in the business. In this paper, i want to research on the potential of dry ports including the development and effective for economic of Vietnam.

• Journal of Korean Society of Forest Science
• /
• v.96 no.2
• /
• pp.183-188
• /
• 2007

This study was carried out to examine the perceptions of consumers and forest product manufacturers in South Korea about forest certification and to identify their willingness-to-pay for certified products by personal interviews. Sixteen percent of interviewees knew and heard about forest certification. However, fifty-six percent of interviewees had an intention to participate in forest certification system. The consumers' group can be described in relative terms as the male of 30 age bracket. The average price premium charged to consumers was higher than one paid to manufacturers, and thus manufacturers are willing to include the additional costs for certified products.

• Research in Plant Disease
• /
• v.18 no.3
• /
• pp.175-185
• /
• 2012

The problems caused by synthetic pesticides have led the need for effective biodegradable pesticides with greater selectivity. Botanical pesticides are generally recognized as safe in agriculture systems. Thus, they have been regarded as attractive alternatives to synthetic chemical pesticides for the pest management. Both lower efficacy and higher costs of production make botanicals more expensive to use than conventional pesticides. Moreover, only a small portion of plant-derived metabolites among a number of bioactive metabolites are in use because commercialization of botanicals is inhibited by several problems such as toxicity, or high production cost. However, with the growing acceptance of botanical pesticides as an efficient crop protection alternative resulting in increasing demand, plant-based pesticides will play a significant role in achieving sustainable agriculture in future.