• 대한기계학회논문집A
• /
• 제21권9호
• /
• pp.1531-1540
• /
• 1997

Mordern industrial society pursues unmanned system and automation of manufacturing process. Abreast with this tendensy, production of goods which requires advanced accuracy is increasing as well. According to this, the work sensing time of dressing by monitoring and diagnosing the condition of grinding, which is th representative way in accurate manufacturing, is an important work to prevent serious damages which affect grinding process or products by wearing grinding wheel. Computer vision system was composed, so that grinding wheel surface was acquired by CCD camera and the change of cutting edge ratio was measured. Then we used automatic thresholding technique from histogram as a way of dividing grinding cutting edge from grinding surface. As a result, we are trying to approach unmanned system and automation by deciding more accurate time of dressing and by visualizing behavior of grinding wheel by making use of computer vision.

• Steel and Composite Structures
• /
• 제19권1호
• /
• pp.93-110
• /
• 2015

The thermomechanical bending response of anti-symmetric cross-ply composite plates is investigated by the use of the simple four variable sinusoidal plate theory. The theory accounts for sinusoidal distribution of transverse shear stress, and satisfies the free transverse shear stress conditions on the top and bottom surfaces of the plate without using shear correction factor. By dividing the transverse displacement into bending and shear parts, the number of unknowns and governing equations for the present theory is reduced, significantly facilitating engineering analysis. The validity of the present theory is demonstrated by comparison with solutions available in the literature. Numerical results are presented to demonstrate the behavior of the system. The influences of aspect ratio, side-to-thickness ratio, thermal expansion coefficients ratio and stacking sequence on the thermally induced response are studied. The present study is relevant to aerospace, chemical process and nuclear engineering structures which may be subjected to intense thermal loads.

• 한국환경과학회지
• /
• 제24권12호
• /
• pp.1649-1656
• /
• 2015

Jeju Island is the highest rain-prone area in Korea that possesses affluent water resources, but future climate changes are predicted to further increase vulnerabilities as resultant of increasing of extreme events and creating spatial-temporal imbalance in water resources. Therefore, this study aimed to provide basic information to establish a proper water resources management plan by evaluating the effects of climate change on water resources using climate change scenario. Direct runoff ratio for 15 years (2000~2014) was analyzed to be 11~32% (average of 23%), and average direct runoff ratio for the next 86 years (2015~2100) was found as 28%, showing an increase of about 22% compared to the present average direct runoff ratio (23%). To assess the effects of climate change on long-term runoff, monthly runoff variation of future Gangjeong watershed was analyzed by dividing three time periods as follows: Present (2000~2030), Future 1 (2031~2070) and Future 2 (2071~2100). The estimated results showed that average monthly runoff increases in the future and the highest runoff is shown by Future 2. Extreme values has been expected to occur more frequently in the future as compared to the present.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.1-9
• /
• 2001

터보분자펌프의 배기성능은 회전자가 돌고 있을 때 순방향과 역방향으로의 배기속도(통과확률$\times$입구컨덕턴스) 및 두 방향으로의 기체 유량(배기속도$\times$입구 압력)의 상호관계에 의해 영향을 받는다. 펌프의 성능을 나타내는 가장 중요한 항목인 배기속도는 순유량, 즉 반대 방향으로의 유량의 차이를 흡기구 압력으로 나누어준 것이며, 최대압축비는 순방향 배기속도를 역방향 배기속도로 나누어준 것이다. 이들 방향성 고유특성은 서로 영향을 미치고 있으며 양쪽 입구 압력 모두의 함수이므로 관련 요소들을 서로 구분하기가 힘들지만 배기속도와 최대압축비의 측정결과를 잘 분석하면 준정량적인 해석이 가능하다.

• 한국항행학회논문지
• /
• 제16권5호
• /
• pp.781-786
• /
• 2012

본 논문에서는 캐패시터가 주기적으로 병렬 연결된 전송선로를 이용한 높은 분배 비율을 갖는 비대칭 분배기의 설계와 성능을 제안하였다. 높은 분배 비율을 갖는 분배기에서 요구되는 높은 임피던스 값은 마이크로스트립 선로로 구현 가능한 값으로 제한하였고, 낮은 임피던스 값은 캐패시터가 주기적으로 병렬 연결된 전송선로를 이용하여 설계하였다. 이러한 설계 방법은 선로 임피던스 값이 $10{\Omega}$ 이하의 전송선로를 마이크로 스트립으로 구현 가능하게 하였다. 이러한 설계 방법을 증명하기 위해서 중심주파수 1 GHz이고, 분배 비율이 10:1인 비대칭 분배기를 구현하였으며, 그 결과는 시뮬레이션과 1dB 이내에서 일치함을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제21권3호
• /
• pp.87-93
• /
• 1993

This study was undertaken to investigate the characteristics and the productivities of lignin olytic enzymes: laccase (Lac) and Mn-dependent peroxidase (MnP) from Coriolus versicolor and Lentinus edodes respectively. Enzymes were isolated from cultural filterates and purified according to the standard methods. These enzymes showed one band in SDS-PAGE and their molecular weights were found 62,000 and 45,000 dalton respectively. Polyclonal antibodies against Lac and MnP were raised against mouse. In the ELISA (enzyme-linked immunosorbent assay), Lac and MnP-antiserum produced a strong positive reaction with Lac and MnP antigen($A_{405}$=2.50 and 3.53 respectively). The sera to negative (S/N) ratio was determined by the dividing the mean absorbance of antibodies by the corresponding diluted samples from normal mouse serum. The sera produced showed 2 times more positive reaction in S/N ratio than negative sera.

• 한국ITS학회 논문지
• /
• 제9권2호
• /
• pp.51-59
• /
• 2010

본 논문에서는 입력신호의 Peak to Average Power Ratio (PAR) 에 따라 원하는 출력전력 백-오프 (Output Power Back-Off, OPBO) 구간에서 최적의 효율특성을 가지는 반전 타입의 비대칭 도허티 전력증폭기의 설계 방법을 제안하였다. 원하는 OPBO 구간에서 비대칭 도허티 전력증폭기의 최적 효율특성을 얻기 위해 주 증폭기와 피킹 증폭기의 피크 전력비를 결정하였고 피크 전력비에 따른 $90^{\circ}$ 임피던스 변환기의 정확한 임피던스 값을 도출 하였다. 또한 비대칭 도허티 전력증폭기 설계시 최적의 성능을 얻기 위해 오프셋 라인의 길이와 전력 분배비를 계산하였다. 측정결과, 비대칭 도허티 전력증폭기는 CDMA 2000 1x 3-FA 테스트 신호에 대해서 평균 출력 전력 48.7 dBm에서 40%의 전력 효율과 -35 dBc의 인접 채널전력비를 얻었다.

• Journal of Yeungnam Medical Science
• /
• 제20권2호
• /
• pp.117-128
• /
• 2003

Thallium-201 scintigraphy is used to discriminate the malignant bone tumor from the benign by qualitatively and quantitatively, and to predict the response of preoperative chemotherapy in osteosarcoma, by comparing the changes of thallium uptake ratio after chemotherapy to the tumor necrosis ratio. Thallium-201 scintigraphy scan should be done prior to surgical biopsy. PICKER Prism 2000 gamma camera with high resolution parallel hole collimator is usually used for scanning. The patient is injected with 2-3mCi of Tl-201 and the early phase is checked in 30 minutes and delayed phase in 3 hours. The scan images are visually evaluated by a blinded nuclear medicine physician. We could evaluate true positive, true negative, false positive and false negative by the comparison of results with those of biopsy, and calculate positive and negative predictive value(%), sensitivity(%), specificity(%) and diagnostic accuracy(%). For the quantitative analysis of thallium uptake, we drew the region of interest on the tumor side and contralateral normal side as mirror image, and calculated the uptake ratio with dividing the amount of gamma count in tumor side by normal side. We could calculate the percent changes of thallium uptake ratio in early and delayed phase, and compare them to the ratio of tumor necrosis. Thallium-201 scintigraphy proved as useful imaging study to discriminate malignant bone tumor from benign, but had exception in giant cell tumor and low grade malignant bone tumors. We can use T1-201 scan to differentiate the benign from the malignant tumor, and to evaluate the response of preoperative chemotherapy or radiotherapy, and to determine the residual tumor or local recurrence. For the better result, we need to have a more detail information about false positive cases and a more objective and quantitative reading technique.

• 환경영향평가
• /
• 제10권1호
• /
• pp.9-19
• /
• 2001

An intensive watershed survey including water quality measurement of 6 times was carried out in order to find out the relationship between pollutant load and water quality in a small stream watershed where livestock wastewater is the main source of water pollution. The findings from the survey are as follows. 1) The number of livestock showed large disagreement among county office, myon, and insite survey. It is vital to check the data at the beginning of watershed survey. 2) The fluctuation of streamflow and water quality was so large depending on the day of measurement that it is essential to set up continuous telemetering system to get reliable data about delivery ratio of pollutants. 3) It was helpful for setting the priority of investigation to check water quality and quantity at several points along the stream after dividing the watershed into 5 drainage areas. 4) To control the livestock wastewater, especially in case of cows, it is necessary to have roof system and prevent overland flow from the ground. In case of pig farms, it is recommended to have public treatment system instead of private treatment system. The exact emission load of livestock wastewater was difficult to estimate, and requires more study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1366-1371
• /
• 2003

Molecular dynamics (MD) simulations are conducted to investigate the thermophysical characteristics and the stability of liquid threads for various conditions. A cylindrical thread in the simulation domain is made of Lennard-Jones molecules. The surface tension of liquid threads can be determined from local densities, local normal and transverse components of the pressure force. In order to understand the effects of thread radii on surface tensions, the Tolman equation is modified on the basis of the cylindrical coordinates for prediction of surface tensions. Surface tensions calculated from the MD simulation agree with the prediction from the modified Tolman equation. In addition, surface tensions decrease linearly with increasing system temperature. For a binary system, the surface tension decreased linearly compared to that for a pure system with increasing binary ratio of solute molecules which have relatively large value of the affinity coefficient. For a fixed binary ratio, the surface tension increased slightly with the affinity coefficient and the maximum value appear around where the affinity coefficient is 1.5 and decreased rapidly for upper value of 1.5. In addition, the critical wavelengths of perturbations are proven to be directly proportional to the equimolar dividing radii of the liquid threads.