• 수산해양기술연구
• /
• 제50권1호
• /
• pp.83-88
• /
• 2014

A new shell divider was manufactured according to the principle of the lever in order to improve working efficiency in collecting the gonad of Sea Urchin, Anthocidaris crassispina, around the coast of jeju. It was composed of three parts of a pair of handles for grasping power, a fulcrum and a pair of knives for action with 21cm in length and 13cm in width. The operating efficiency of the shell divider was tested out in three place of Jeju coast. Statistical significances of differences of working time between test groups were calculated according to the t-test with the level of significance. In dividing the shell of sea urchin, the average of about 3 seconds of working time by the shell divider was less than that by a knife. At the result of t-test, the statistical significance in the working time existed between the divider group and the knife group. On the other hand, the working time among the divider operators showed no significant differences. It is concluded that the shell divider is more efficient than a knife in traditional operating.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.406-407
• /
• 2009

In this paper, presents the Wilkinson power divider used integrated passive device (IPD) technology with excellent performance for personal communication services (PCS). The insertion loss of this power divider is 0.4 dB and the port isolation greater than 25 dB over the entire band. Return losses input and output ports are 18 dB and 19 dB, respectively. The power divider based on SI-GaAs substrate is designed within die size of about $0.775\times0.53\;mm^2$.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.29-32
• /
• 2005

본 논문에서는 right/left-handed특성을 이용한 8 포트 동위상 전력분배기를 제안한다. 이 전력분배기는 사용되는 전송선의 전기적 길이에 상관없이 동위상 분배가 가능하기 때문에 전력 분배기의 크기를 크게 줄일 수 있다. 전력분배기에 사용되는 전송선의 길이가 짧을수록 광대역 특성을 보이며 분배기의 크기는 줄어든다.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1727-1732
• /
• 2011

In order to realize a high performance(low loss, high isolation) microwave power divider/combiner, we have designed the power combiner/divider precisely in accordance with the different hight of central part. In the case of the high central part of the hight of $h_r$=10.2, a compensating part of the conical line is inserted in the conical conversion transmission line, and in the case of low central part of the hight of $h_r$=5.0, the conical conversion transmission line is remodeled into the 2-stage bend structure. In both case, the reflection characteristics are improved to 30dB over the operating frequency range of 5GHz bandwidth. A resistance is inserted between the peripheral ports so as to try to improve the isolation characteristics of the device. For the 16-divider/combiner, the isolation characteristics are improved to 10dB over the operating frequency range of 5GHz bandwidth.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1829-1831
• /
• 2001

A novel multi-section power divider configuration is proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a planar multi-section three-ports hybrid and a waveguide transformer design procedures. The multi-section power divider is based on design theory of the optimum quarter-wave transformer. Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.408-409
• /
• 2008

In this paper the power divider is realized using the IPD processes for 900/1800 MHz; the designed power divider achieved the isolation of more than -24 dB. the insertion loss of nearly -3.5 dB, and the return loss of about -25 dB. The simple dual-band power divider based on SI-GaAs substrate is realized within the die size of about $2.5\times2mm^2$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.353-356
• /
• 2000

In this paper, a high-performance and small-area floating-point divider, which is suitable for embedded processors and supports all rounding modes defined by IEEE 754 standard, is designed using the series expansion algorithm. This divider shares and fully utilizes the two MAC units for quadratical convergence to the correct quotient. The area increase of two MAC units due to the division is minimized in this design, so that it can be suitable for embedded processors. The tested HDL codes are synthesized and optimized with 0.35$\mu\textrm{m}$ CMOS standard celt libraries. The results show that the latency of the synthesized divider is 17.43 ㎱ in worst condition. But, the divider calculates the correct rounded quotient through only 6 cycles.

• Journal of electromagnetic engineering and science
• /
• 제12권3호
• /
• pp.216-222
• /
• 2012

This paper presents a single-pole eight-throw switch, based on an eight-way power divider, using substrate integrate waveguide(SIW) technology. Eight sectorial-lines are formed by inserting radial slot-lines on the top plate of SIW power divider. Each sectorial-line can be controlled independently with high level of isolation. The switching is accomplished by altering the capacitance of the varactor on the line, which causes different input impedances to be seen at a central probe to each sectorial line. The proposed structure works as a switching circuit and an eight-way power divider depending on the bias condition. The change in resonant frequency and input impedance are estimated by adapting a tapered transmission line model. The detailed design, fabrication, and measurement are discussed.

• Journal of electromagnetic engineering and science
• /
• 제17권1호
• /
• pp.9-13
• /
• 2017

In this work, a broadband composite right/left-handed (CRLH) half-mode substrate integrated waveguide (HMSIW) quadrature Wilkinson power divider is proposed. The proposed CRLH-HMSIW quadrature power divider includes a microstrip Wilkinson power divider on the transition structure between the microstrip and HMSIW, and two thru transmission lines for the HMSIW and the CRLH-HMSIW. The measured amplitude, phase difference and isolation between the two output ports of the proposed structure have 1 dB, ${\pm}5^{\circ}$ and less than -15 dB in a wide frequency range of 4.1-6.68 GHz with 47.9% bandwidth, respectively.

• Journal of electromagnetic engineering and science
• /
• 제14권1호
• /
• pp.15-24
• /
• 2014

A compact dual-band three-way metamaterial power divider is proposed that has three in-phase outputs. Fully printed composite rightand left-handed (CRLH) unequal and equal power dividers are first implemented for 900-MHz and 2.4-GHz bands with the power-division ratios of 2:1 and 1:1, respectively. An initial 1:1:1 power divider is then achieved by incorporating the input of the two-way equal block into an output of the unequal block, and trimming the interconnection parameters. The condition of an identical phase at the three outputs of the power divider is then met by devising a hybrid CRLH phase-shift line to compensate for the different phase errors at the two frequencies. This scheme is confirmed by predicting the performance of the power divider with circuit analysis and full-wave simulation and measuring the fabricated prototype. They results show agreement; the in-phase outputs as well as the desirable power-division are accomplished and outdo the conventional techniques.