• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.591-599
• /
• 2005

This paper proposes a systematic design methodology for high-speed/high-precision servomechanisms by using a disturbance observer. A multiplicative uncertainty model and a two degree-of-freedom controller composed of a disturbance observer (DOB) and a PD controller are considered as subsystems. Analysis of the system performance, such as internal stability and bandwidth of a servomechanism according to subsystem parameters is conducted for better understanding of the dynamic behavior and interactions among the subsystem parameters. Then, an integrated design methodology, where the interactions are considered simultaneously, is applied to design processes of the servomechanism. The tradeoff relationship between disturbance suppression and measurement noise rejection of the DOB is considered through the design process. Numerical case studies show the improved possibility to evaluate and optimize the dynamic motion performance of the servomechanism. Moreover, the disturbance observer designed based on the proposed design methodology yields excellent disturbance suppression performance.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.147-159
• /
• 2018

In this paper, the voltage tracking control of a conventional DC-DC boost converter affected by unknown, time-varying circuit parameter perturbations is investigated. Based on the fundamental property of incremental passivity, a passivity based control law is designed. Then, to obtain a better disturbance rejection property, two generalized proportional integral (GPI) observers are employed to estimate the time-varying uncertainties in the output voltage and inductor current channels, and the estimated values are applied as feedforward compensation. Moreover, the global trajectory tracking performance of a system with disturbances is ensured under the composite controller. Finally, simulation and experiment studies are provided to demonstrate the feasibility and effectiveness of the proposed method. The results show that the proposed controller delivers a promising disturbance rejection capability as well as a good nominal tracking performance.

• 전기학회논문지
• /
• 제64권2호
• /
• pp.297-303
• /
• 2015

We propose a disturbance observer(DOB) based feedback linearization control to improve position tracking performance in the presence of disturbance. The proposed method consists of a disturbance observer and a feedback linearization controller. The disturbance observer is designed to estimate the load force disturbance in electro-hydraulic systems. An auxiliary state variable is proposed in order to avoid amplification of the measurement noises in the disturbance observer. Using the estimated disturbance enables the Electro-hydraulic servo systems(EHS) dynamics to be changed into feedback linearization from. In order to compensate for the disturbance and to track the desired position, the feedback linearization based controller is proposed. The proposed method has a simple structure which can easily be implemented in practice. As a result, the proposed method improves the position tracking performance in the presence of disturbance. Its performance is validated via simulations.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권3호
• /
• pp.1-9
• /
• 2024

본 연구는 대기외란 조건에서 비전센서를 활용하여 구조물의 동적 변위 측정을 위하여 멀티스케일 템플릿 매칭 기법 (TMI: Template Matching with Image pyramids)을 제안하고 제안기법의 변위 측정 성능을 조사하기 위해 진행되었다. 촬영거리에 따른 변위 측정 성능을 평가하기 위해 3층 전단 구조물을 설계하였으며, FHD(1920×1080)급 카메라를 준비하여 변위 계측에 사용하였다. 최초 촬영거리를 10m로 설정하였고, 10m씩 멀어지면서 최대 40m까지 변위 측정 실험을 진행하였다. 실내 조도 조건(450lux)에서 발열 기구를 활용하여 대기외란을 발생시켰으며, 대기외란으로 이미지를 왜곡시켰다. 사전실험을 통해 대기외란시 특징점 기반 변위 측정 방법과 제안기법의 변위 측정 타당성을 비교 검증하였으며, 검증 결과 제안기법의 낮은 측정 에러율을 나타냈다. 대기외란 환경에서 변위 측정 성능평가 결과, 인공 타겟을 활용한 TMI는 대기외란 유무에 따라 변위 측정 성능에 큰 차이가 없었다. 하지만 자연 타겟을 활용하였을 때, 20m 이상의 촬영거리에서 RMSE가 크게 상승하여 제안기법의 운용 한계를 보여줬다. 이는 촬영거리 증가에 따라 자연 타겟의 해상도가 저하되며, 대기외란으로 인한 이미지 왜곡이 템플릿 이미지 추정에 오류가 발생 되어 변위 측정 오차가 높게 발생하는 경향을 나타냈다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.133-135
• /
• 2006

This paper considers a speed control problem of DC motor under load variations. In order to reduce the effect of load variation, a disturbance observer has been designed for the given system. With a cheap encoder there exists considerable measurement noise in the velocity feedback and it should be reflected in designing the disturbance observer. The authors have obtained the nominal transfer function of a DC motor and designed a disturbance observer for the control purpose. With the disturbance observer a digital controller has been implemented using a DSP(TMS320F2812). Some experiments show the enhanced performance of the control system with the proposed method.

• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.743-751
• /
• 2001

A Prototype reaction wheel, named the Hankuk Aviation University (HAU) reaction wheel, has been developed for KAISTSAT satellite series. Torque and force disturbances are inherent in reaction wheels, and thus the force and torque characteristics should be examined for every newly developed reaction wheel. The torque and force disturbance noises in the prototype HAU reaction wheel are measured with a torque-measuring table developed for the present study. A new measuring procedure based on a simple principle is applied for the measurements. The frequency characteristics of the torque and force noises are analyzed by examining the power spectral density. The effect of the torque noise on the attitude stability is also examined through numerical simulations with a single-axis attitude model. The noise-induced attitude error and jitter and found to be well below the specified error limits for the KAISTSAT satellite series.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1391-1395
• /
• 2011

In this paper, would implement a transceiver for the visible light communication that based on wireless communication driving technology for LED illumination-based infrared ray communication, and measurement analyzed a design error rate of a transceiver variable rate has made about distance change -2.5m. The error rate measured a voltage variable along illuminate change between switchable circumstances, which has illuminated insight and outright. Each analyzed and measurement on the communication distance errors along the differences of disturbance light between night and days. The LED module has implemented for number of 6 through illumination dimming in case of different values. Also, implementation for the system module of a VLC transceiver based on the infrared sensors which used feedback outcome value has analyzed with error rate.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1299-1306
• /
• 2017

This paper presents a boundary tracking control of an agent. To this end, it is shown that the boundary tracking problem can be reformulated into a robust control of uncertain double integrator first. Then, a disturbance observer (DOB) based control is proposed solving the robust control problem. Unlike the existing results in the literature, the proposed DOB based control requires only the local position measurement of the boundary (not the gradient information). The performance of the proposed control is demonstrated for two cases: the measurement of the boundary is given in a continuous or discrete manner. Finally, it is shown that the proposed control can be used for environmental monitoring as well by showing that the agent follows a level curve of real environmental monitoring data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.278-281
• /
• 2002

In this paper we propose a controller which has the capability of disturbance measurement calibration for Cds array sensors in a magnetic levitation system. Steady state error due to environment light condition or external disturbance is corrected constantly. The correction is made by the sensors to measure the ball position of the system without additional deployment of sensors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.40-46
• /
• 1993

In this paper, we design a multirate controller for a given multirate sampled-data system which has a periodic output measurement scheme. A sufficient condition for maintaining observability in multirate sampled-data systems is given first. The design strategy for disturbance rejection is proposed. The proposed controller has IMC structure, and can be deomposed into a disturbance estimator and the inverse of fast plants.