• Korean Journal of Remote Sensing
• /
• v.35 no.6_4
• /
• pp.1341-1350
• /
• 2019

This research deals with algorithm for forest fire severity classification using multi-temporal KOMPSAT-3A image to mapping forest fire areas. The recent satellite of the KOMPSAT series, KOMPSAT-3A, demonstrates high resolution and multi-spectral imagery with infrared and high resolution electro-optical bands. However, there is a lack of research to classify forest fire severity using KOMPSAT-3A. Therefore, the purpose of this study is to analyze forest fire severity using KOMPSAT-3A images. In addition, this research used pre-fire and post-fire Sentinel-2 with differenced Normalized Burn Ratio (dNBR) to taking for burn severity distribution map. To test the effectiveness of the proposed procedure on April 4, 2019, Gangneung wildfires were considered as a case study. This research used the probability density function for the classification of forest fire damage severity based on R software, a free software environment of statistical computing and graphics. The burn severities were estimated by changing NDVI before and after forest fire. Furthermore, standard deviation of probability density function was used to calculate the size of each class interval. A total of five distribution of forest fire severity were effectively classified.

• Journal of Mechanical Science and Technology
• /
• v.20 no.7
• /
• pp.1002-1011
• /
• 2006

In this study, we describe the conventional hot pressing (CHP) of layered $Al-B_4C$ composites and their characterization. The matrix alloy Al-5 wt.%Cu was prepared from elemental powder mixtures. The metal and B4C powders were mixed to produce either $Al-Cu-10vol.%B_4C$ or $Al-Cu-30vol.%B_4C$ combinations. Then, these powder mixtures were stacked as layers in the hot pressing die to form a two-layered composite. Hot pressing was carried out under nitrogen atmosphere to produce $30\times40\times5mm$ specimens. Microstructural features and age hardening characteristics of composites were determined by specimens cut longitudinally. The flexural strength of both layered composites and their monolithic counterparts were investigated via three point bending tests. In the case of layered specimens of both $10vol.%B_4C$ and $30vol.%B_4C$ containing layers were loaded for three-point test. The results show that a homogeneous distribution of $B_4C$ particles in the matrix alloy which is free of pores, can be obtained by CHP method. The ageing behavior of the composites was found to be influenced by the reinforced materials, i.e. higher hardness values were reached in 8 hrs for the composites than that for the matrix alloy. Flexural strength test showed that two-layered composites exhibited improved damage tolerance depending on layer arrangement. Microstructural investigation of the fracture surfaces of the bending specimens was performed by means of scanning electron microscope (SEM). While layer with lower reinforcement content exhibited large plastic deformation under loading, the other with higher reinforcement content exhibited less plastic deformation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3085-3091
• /
• 2013

Associations between ABCB1 and XPC genetic polymorphisms and risk of developing colorectal cancer (CRC) as well as clinical outcomes in CRCs with chemotherapy were investigated. A case-control study was performed on the ABCB1 C3435T, G2677T/A and XPC Lys939Gln polymorphisms in 428 CRC cases and 450 hospitalbased, age and sex frequency-matched controls using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) assays. We observed that the ABCB1 3435CT or CC+CT variants were significantly linked with increasing risk of developing CRC (adjusted OR (95% CI): 1.814 (1.237-2.660), P=0.0022; adjusted OR (95% CI): 1.605 (1.117-2.306), P=0.0102, respectively). Moreover, the distribution frequency of XPC AC genotype or AC+CC genotypes also showed a tendency towards increasing the suscepbility for CRC (P=0.0759 and P=0.0903, respectively). Kaplan-Meier curves showed that the ABCB1 C3435T variant was associated with a tendency toward longer progression-free survival (PFS) (n=343, Log-rank test: P=0.063), and the G2677T/A variant genotypes (GT+TT+GA+AA) with a tendency for longer OS in postoperative oxaliplatin-based patients (n=343, Log-rank test: P=0.082). However, no correlation of the XPC Lys939Gln polymorphism was found with PFS and OS in patients with postoperative oxaliplatin-based chemotherapy (n=343). Our study indicated that ABCB1 polymorphisms might be candidate pharmacogenomic factors for the prediction of CRC susceptibility, but not for prognosis with oxaliplatin chemosensitivity in CRC patients.

• Journal of Korean Public Health Nursing
• /
• v.2 no.2
• /
• pp.45-61
• /
• 1988

Clonorchiasis should be realized as an important public health problems in Korea by their wide distribution, high prevalence rate and heavy infection intensity. This study was designed to obtain the infection rate, contributing factors as well as the behavior of infected persons among the factory workers in Pohang area where that parasite still remains as a problem. Study was undertaken from September '86 to October '87. Clonorchiasis skin test was performed for 3180 factory workers, and stools of skin test positive reactors were examined. Praziquantel was prescribed to stool examination positive persons for clonorchis sinensis ova. After one year. stool examination was repeated for them who received medicine. At the same time. a structured questionnaire was given and the results were analyzed and compared with control group. The results of this study are summarized as follows; 1. The infection rate of Clonorchis sinensis. 1) Clonorchiassis skin test positive rate was $26.2\%$ (834/3180). 2) Stool(Clonorchis sinensis ova) positive rate among skin test positive reactors was $21.6\%$ (129/598) All 129 infected persons were male. 2. Contributing factors of Clonorchis sinensis infection. 1) The chance of infection was higher in low-educated peple(p<0.01) 2) Stool(Clonorchis sinensis ova)positive rate was higher among the persons who reside near the riverside now(p<0.01), or among the persons who long history of riverside residence(p<0.01) 3) The infection rate was higher in thoes who like sliced raw fresh water fishes than in those who like cooked fishes(p<0.05). 4) Correct answering rate for questions about the cause and route of Clonorchis sinensis infection was low in infected persons. 5) The infection rate was lower among those who had experience of previous clonorchiasis test(p<0.01). 6) Family members of infected persons show higher rates of infection(p <0.01). 3. Treatment effect and compliance of infected person to treatment. 1) After one year, negative stool conversion rate was $85.4\%$. 2) $70.8\%$ of infected persons took the medicine; Only $3.1\%$ of them consulted to physician to know the medication effect; As many as $29.4\%$ of them continued to consume raw fresh water fishes. As a conclusion, City of Pohang area, Hyung San River in the center, is an endemic area of clonorchiasis. Current clonorchiasis control system seemed to be ineffective; many of the skin test positive group did not submitted their stool for examination; only $70.8\%$ of infected persons took the medicine even though the drugs were given free of charge; $29.4\%$ continued to consume raw fresh water fishes after taking medicine. Therefore. proper education program should be provided to improve the compliance to treatment. Follow-up for infected cases is mandatory to prevent waste of restricted budget.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.249-264
• /
• 1995

Although liposome has many advantages as a pharmaceutical dosage form, its application in the industrial field has been limited because of some problems such as preparation method, reproducibility, scale-up, stability and sterilization etc. Liposomes prepared by microemulsification method had defined size, narrow size distribution, reproducibility and high entrapment efficiency. For enhancing the stability, the dry form of liposome was recommended. These types of liposome are proliposome and freeze-dried liposome. The liposome must have some properties for preparing of freeze-dried liposome; small size $(50{\sim}200\;nm)$, narrow size distribution and cryoprotectant. In this experiment, the liposomes containing 5-Fluorouracil(5-FU) and its prodrug(pentyl-5-FU-1-acetate; PFA, hexyl-5-FU-1-acetate; HFA) were made with soybean phosphatidylcholine, cholesterol, stearylamine(SA) and dicetyl phosphate(DCP) employing hydration method or microemulsification method using $Microfluidizer^{TM}$. Both or liposome types were MLV and MEL. After preparation, freeze drying and rehydration were performed. In the process of freezing, trehalose(Tr) was added as a cryoprotectant. Their evaluation methods were as follows; entrapment efficiency, mean particle size and size distribution, dissolution test, retain of entrapment efficiency and turbidity after freeze-drying. The results are summarized as belows. The entrapment efficiency of 5-FU was dependent on total lipid concentration and cholesterol content but that of PFA and HFA was decreased when cholesterol was added. When DCP and SA were added, entrapment efficiency was decreased. As the partition coefficient of drug was increased, entrapment efficiency was increased. Under the same condition, entrapment efficiency of MEL is similar to that of MLV. The mean particle size and size distribution of MEL were smaller than those of MLV. Dissolution rates of drug from both liposome types were comparatively similar. Dissolution rates of drugs with serum and liver homogenate were faster than without these material. After preparation of liposome, free drug was removed efficiency by Dowex 50W-X4. When liposome was freeze-dried and then rehydrated in the presence of Tr, characteristics of liposome were maintained well in MEL than MLV. Tr Was used successfully as a cryoprotectant in the process of freeze drying and the optimal ratio of Tr:Lipid was 4:1(g/g).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.929-936
• /
• 2015

Nacelle anemometers are mounted on wind-turbine nacelles behind blade roots to measure the free-stream wind speed projected onto the wind turbine for control purposes. However, nacelle anemometers measure the transformed wind speed that is due to the wake effect caused by the blades' rotation and the nacelle geometry, etc. In this paper, we derive the Nacelle Transfer Function (NTF) to calibrate the nacelle wind speed to the free-stream wind speed, as required to carry out the performance test of wind turbines according to the IEC 61400-12-2 Wind-Turbine Standard. For the reference free-stream wind data, we use the Light Detection And Ranging (LiDAR) measurement at the Shinan wind power plant located on the Bigeumdo Island shoreline. To improve the simple linear regression NTF, we derive the multiple nonlinear regression NTF. The standard error of the wind speed was found to have decreased by a factor of 9.4, whereas the mean of the power-output residual distribution decreased by 6.5 when the 2-parameter NTF was used instead of the 1-parameter NTF.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.633-640
• /
• 2010

This study was performed to get basic information about properties of high blaine cement for shotcrete use. Particle size distribution, setting time and compressive strength test, analysis like as SEM, DSC thermal analysis, XRD was carried out to investigate principle properties of high blaine cement. Setting time of high blaine cement was shorter and compressive strength was higher than those of ordinary portland cement (OPC). Results of analysis showed early hydration products of high blaine cement is smaller and spread widely due to increased specific surface. From the SEM observation and analysis of DSC and XRD results, it was seen that the aluminates accelerators promoted calcium aluminium hydrates while the alkali free accelerators increased ettringite and monosulfates formation. Strength and setting time measurement of cement paste with aluminate accelerator is more effective than the alkali free accelerator in reducing the setting time and increasing early strength while alkali free accelerator is more effective in increasing the strength after 7 days.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.12
• /
• pp.107-116
• /
• 2011

Rigid soil containers (or rigid boxes) are often used for 1g shaking table tests. The rigid boxes, however, do not accurately simulate the amplification of ground acceleration and phase difference of seismic motion in the model ground due to the confinement of shear deformation and the reflection of seismic wave at the box walls. Laminar soil containers (or laminar shear boxes) can simulate the free field motion at convincingly superior accuracy than the rigid ones. In this study, the soft ground is modeled for both types of boxes and is subjected to seismic loading using a 1g shaking table. The comparison of the results using the two types of soil containers illustrates that, in case of the rigid box, the ground acceleration shows non uniform distribution and the phase synchronization of input motion. Whereas, the dynamic behavior of the laminar shear box shows good agreement with the free field behaviors such as the amplification of ground acceleration and the occurrence of phase difference.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.101-113
• /
• 2020

This study aimed to explore how effective explicit form-focused instruction (FFI) is in teaching the schwa vowel /ə/ to EFL students in a classroom setting. The participants were 25 female high school students, who were divided into the experimental group (n=13) and the control group (n=12). One female American also participated in the study for a speech sample as a reference. The treatment, which involves shadowing model pronunciation by the researcher and a free text-to-speech software and the researcher's feedback in a private session, was given to the control group over a month and a half. The speech samples, for which the participants read the 14 polysyllabic stimulus words followed by the sentences containing the words, were collected before and after the treatment. The paired-samples t test and non-parametric Wilcoxon signed-rank test were used for analysis. The results showed that the participants of the experimental group in the post-test reduced the duration of the schwa by around 40 percent compared to the pre-test. However, little effect was found in approximating the participants' distribution patterns of /ə/ measured by the F1/F2 formant frequencies to the reference point, which was 539 Hz (F1) by 1797 Hz (F2). The findings of this study suggest that explicit FFI with multiple repetitions and corrective feedback is partly effective in teaching pronunciation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.226-241
• /
• 2000

Recently a new generation of crown and bridge veneering resins containing submicron glass fillers was introduced. These ultrasmall particle hybrid composite materials distinguish themselves, compared with conventional microfill crown and bridge resins, through improved mechanical properties. It is claimed that these composites are suitable for metal free crowns and even bridges using fiber reinforcement. The purpose of this study was to evaluate the effect of thermal cycling on the tensile strength of the following veneering composites: Artglass(Heraeus Kulzer Co., Wehrheim, Germany), Estonia(Kuraray Co.. Japan), Sculpture(Jeneric Pentron Co., Wallingford, U.S.A.), and Targis(Ivoclar Co., Schaan Liechenstein). According to manufacturer's instructions, rectangular tensile test specimens measuring $1.5{\times}2.0{\times}4.5mm$ were made using a teflon mold. Whole specimens were divided into two groups. One group was dried in a desiccator at $25^{\circ}C$ for 10 days, and another group was subjected to thermal cycling($10,000{\times}$) in water($5/55^{\circ}C$). All test specimens were placed in a universal testing machine and loaded until fracture with a crosshead speed of 0.5mm/min. Weibull analysis and Tukey's test were used to analyze the data. The fracture surfaces of specimens were observed in SEM and the aliphatic C=C absorbance peak of Estenia and Targis resin was analyzed using Fourier transform infrared(FTIR) spectroscopy. Within the limitations imposed in this study, the following conclusions can be drawn: 1. Both in drying condition and thermal cycling condition, the highest tensile strength was observed in Estenia testing group(p<0.05). 2. The strength data were at to single-mode Weibull distribution, and the Weibull modulus of all veneering composite resin specimens increased after thermal cycling treatment. 3. After thermal cycling test, the highest tensile strength was observed in the Estenia group, and the lowest value was observed in the Targis group. The tensile strength values showed the significant differences between each group(p<0.05) 4. The aliphatic C=C absorbance peak of Estonia and Targis resin was decreased after light curing, and there was no distinct change after thermal cycling.