• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.540-545
• /
• 2001

An experimental study was conducted to compare the heat transfer characteristics of an impinging slot jet and three kinds of impinging circular jets. Thermochromic liquid crystal with an image processing system was employed to measure the temperature of impinging wall where constant heat flux condition was applied. The distribution of convective heat transfer coefficients were then evaluated for eight nozzle-to-surface distance settings for each jet cases. The cooling effect was linearly proportional to the number of nozzles for circular jet cases at the same nozzle exit speed. However, the heat transfer under constant volume flow rate was the most at single circular jet. It was concluded that the overall convective heat transfer was better at the circular jets than the slot jet.

• Agricultural and Biosystems Engineering
• /
• 제1권1호
• /
• pp.38-42
• /
• 2000

Though the freshness for agricultural products is an important factor related to their quality management, this terminology is being used restrictedly because it is very subjective. In this study, a dimensionless index which had the span of the maximum of 1 through the minimum of 0 was proposed to describe freshness of the product with time-variant quality and was applied to Tsugaru and Fuji apples. First, the compressive properties having the linearity in their change regarding time elapsed after harvest were selected. For Tsugaru apple, bio-yield and rupture forces had high correlation with time while for Fuji, bio-yield and rupture deformations had high correlations. When the slope, or ratio of force to deformation, was considered, the effect of cultivar could be neglected. When the linearly time-variant compressive properties for Tsugaru and Fuji apples were involved in the freshness indices, they described well freshness of apples. Also, the freshness decay constant depicted a characteristic which related to freshness decay rate. Therefore, the freshness index can be utilized to manage the quality during storage and distribution of apples.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1597-1599
• /
• 1996

In this study, we investigated the electrical characteristics such as tracking resistance, dielectric constant, insulating resistance, and arc resistance, of silicone rubber for outdoor use, and, focused on the tracking resistance. In the Inclined Plane Test, two kind of the contamination solutions were used, and their phenomena were observed. The average leakage current and the tracking breakdown time decreased, and erosion rate increased, using anionic surfactant added contaminant solution. The dielectric constant and dissipation factor were increased with increasing temperature.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.58-65
• /
• 1999

The effect of specimen thickness on fatigue crack growth rate was studied. The objective of the present study is to investigate the effect of specimen thickness on the fatigue crack growth behavior at various stress intensity factor ranges and also the variation of material restance to fatigue crack growth. The fatigue crack growth resistance was treated as a spatial stochastic process, which varies randomly on the crack path, Compact tension specimens with a LT orientation for structural steel were used. All testing was done at a constant stress intensity level. The experimental data were analyzed for the size effect to determine the Weibull distributions of the material resistance.

• 한국산업정보학회논문지
• /
• 제5권2호
• /
• pp.62-69
• /
• 2000

이 논문은 임의중단 표본을 이용하여 entropy에 대한 두 개의 버클리-제임스(Buckley-James)형 추정량을 제안한다. 제안된 추정량의 소표본 특징을 조사하기 위하여 컴퓨터 모의실험을 실시하였다. 이 때 사용된 분포는 증가위험률, 상수위험률, 감소위험율을 갖는 분포를 가정하였고, 실제의 자료를 이용하여 분석하는 예를 보인다.

• Communications for Statistical Applications and Methods
• /
• 제25권1호
• /
• pp.91-97
• /
• 2018

In this paper, we show that there exists an optimal investment policy for the surplus in a risk model, in which the surplus is continuously invested to other business at a constant rate a > 0, whenever the level of the surplus exceeds a given threshold V > 0. We assign, to the risk model, two costs, the penalty per unit time while the level of the surplus being under V > 0 and the opportunity cost per unit time by keeping a unit amount of the surplus. After calculating the long-run average cost per unit time, we show that there exists an optimal investment rate $a^*$>0 which minimizes the long-run average cost per unit time, when the claim amount follows an exponential distribution.

• 지질공학
• /
• 제13권3호
• /
• pp.281-292
• /
• 2003

모형시추공 내에서 공내수 전기전도도의 자동 측정시스템을 구축하고 이로부터 수리상수 결정과 관련된 제반 기초 환경을 검증하였다. 실험은 상대적으로 높은 염도를 공내수로 하고 증류수를 지층수로 사용하여 지층수의 유입과 유출되는 유량을 일정하게 유지한 상태에서 공내수의 전기전도도 프로파일을 구하는 방식으로 이루어졌다. 관찰의 주 대상은 공내수와 지층수 사이의 염도차. 온도차 및 지층수의 유입량. 유입 ·유출구에 따른 모형시추공 내에서의 전기전도도 변화 양상 파악에 있었다. 실헌결과, 이들 요인이 미치는 영향범위와 적정 측정 환경이 제시되어 향후 모델 실험 및 원위치시험에서 적용될 기초실험 여건이 마련되었다.

• Journal of Pharmaceutical Investigation
• /
• 제20권1호
• /
• pp.19-28
• /
• 1990

Pharmacokinetic parameters of aminoglycosides are dependent on renal function, sex, age, hematocrit, fever, lean body weight (LBW) and disease states, etc. Therefore, the individual pharmacokinetic parameters such as half life $(t^{1/2})$ and volume of distribution(Vd) are needed to achieve optimal therapy. However these parameters had not been determined in Koreans. The purpose of this study was to evaluate the Vd and $t^{1/2}$ of amikacin in Korean patients who had normal renal function, to compare the mean values of study group with that reported in the literature and to compare the measured $t^{1/2}$ with the expected $t^{1/2}$ based on actual body weight (ABW), LBW and ideal body weight (IBW), respectively. Based on data, the Vd was greater than the literature and $t^{1/2}$ was similar to the literature. The predicted $t^{1/2}$ based on IBW was the closest to actual $t^{1/2}$. And postpartum patients had greater Vd than other group and had lower correlation between actual elimination rate constant and calculated creatinine clearance but higher correlation between actual elimination rate constant and Vd than other group.

• 한국통신학회논문지
• /
• 제28권4B호
• /
• pp.237-244
• /
• 2003

본 논문에서는 QPSK/16-QAM 방식의 LMDS(Local Multipoint Distribution Services) 용 downstream 수신기 칩 설계에 대해서 기술한다. 제안된 칩은 블라인드 등화기, 심볼 타이밍 복구회로, 반송파 복구회로로 구성된다. 블라인드 등화기는 CMA(Constant Module Algorithm)를 이용한 DFE(Decision Feedback Equalizer) 구조로 사용했다. 심볼 타이밍 복구회로는 Parabolic Interpolator를 이용하였고 반송파 복구회로는 Decision Directed Basis 방식을 이용하여 반송파의 주파수 옵셋, 위상 옵셋, 위상지터(Jitter)를 제거하였다. 구현된 수신기는 10, 20, 30 그리고 40 Mbps 의 4가지 데이터 전송률을 지원할 수 있고 심볼 전송률은 10 Mbaud까지 지원할 수 있으며 기존의QAM 수신기보다 빠른 구조이다.

• Radiation Oncology Journal
• /
• 제2권1호
• /
• pp.11-20
• /
• 1984

The renewed interest in the use of hyperthermia in cancer therapy is bases on radiobiological and clinical evidence indicated that there may be a significant therapeutic advantage with the use of heat alone or combined with radiation or chemotherapy, There are many methods for generating heat for localized tumor as like radiofrequency, microwave, electromagnetic induction and ultrasound. But it is very difficult to be even thermal dose distribution and stable output of power and then the detection of temperature in tumor is difficult to be precise with thermocouples and semiconductor sensors. We designed the microwave heating generator, dipole antenna applicators and autometic temperature controlled thermocouples for localized hyperthermia on skin and in cavities. 1. The microwave generator with 120 W, 2,450MHz magnetron could be heating up to $40^{\circ}C\~50^{\circ}C\;for\;1\~2$ hours in living tissues. 2. The thermal dose distribution in tissue with microwave was described $42^{\circ}C\~44^{\circ}C$ with in 3 cm depth and $2\~6cm$ diameter area. 3. Skin surface heating applicator with spiral 3 times wave length antenna radiated high Power of microwave. 4, Intracavitary heating applicator with dipole antenna with autometic control temperature sensor kept up continuously constant temperature in tissue. 5. For constant thermal distribution, applied two steps power with 10W microwave after $17\~20W$ during first 10 minutes. 6. The cooling rate by blood flew in living tissue was rised as $10\%$ then meats.