• 제목/요약/키워드: Distribution of particles

검색결과 1,785건 처리시간 0.025초

반고상 온도구역에서 등온유지한 Al-Si, Al-Cu 및 Mg-Al합금의 고상형상 및 조직의 변화 (Variation of Morphology of Solid Particles and Microstructure in Al-Si, Al-Cu and Mg-Al Alloys During Isothermal Heat-Treatment at Semi-Solid Temperatures)

  • 정운재;김기태;홍준표
    • 한국주조공학회지
    • /
    • 제16권6호
    • /
    • pp.556-564
    • /
    • 1996
  • Variation of shape and size of solid particles and solute redistribution in Mg-9wt.%Al, AI-4.5wt.% Cu, and AI-7wt.%Si alloys were investigated when they were heated to semi-solid temperatures and held without stirring. In the case of Mg-9wt.% Al and Al-4.5wt.%Cu alloys, the polygonal shaped solid particles were agglomerated with non-uniform distribution, and there were no disappearance of the solid/solid boundary until the end of melting. But in the case of an Al-7wt.%Si alloys, two or three spherical shaped particles were coalesced or separated individually, and the coalesced particles had no solid/solid interface on the contrary to the prevous case. The maximum size of solid particles during isothermal heating at high temperature was smaller than that at lower temperature, but the time required to reach the maximum size at high temperature was shorter than that at lower temperature. The concentrations of main solute atom whose distribution coefficient is lower than 1, decreased in the primary solid particles as the liquid fraction increased, and the gradient of solute concentration was steeper in Mg-9wt.%Al alloy and Al-4.5wt.%Cu alloy than that of Al-7wt.%Si alloy.

  • PDF

해수 중에서 자연상태 황토입자의 침강특성 (Settling Characteristics of Natural Loess Particles in Seawater)

  • 김성재
    • 한국수산과학회지
    • /
    • 제32권6호
    • /
    • pp.706-712
    • /
    • 1999
  • 해수 중에서 자연상태의 황토입자의 침강특성에 관한 연구의 요약은 다음과 같다. 1. 2,000mg/$\ell$ 황토용액에 대한 PSD 곡선은 0 min. 침강시간에서 정규분포곡선을 나타내었고 평균입도는 31.6$\mu$m, 변동계수는 $75,6\%$로써 매우 광범위한 입도의 분포상태를 보여 주었다. 그러나 침강시간이 경과함에 따라 비정규분포곡선의 양상을 나타내었다. 한편 무게누적분포곡선에서 거의 $100\%$의 입자가 20$\mu$m 보다 큰 입자로 구성되어 있었다. 2. 해수 중에서 황토입자에 대한 $V_s/(D_{bm})^{1/2}$ 비의 값은 입자의 크기가 증가함에 따라 기하급수적으로 증가하였으며, 1 $\mu$m 입자를 중심으로 이 이상은 $V_s$$(D_{bm})^{1/2}$보다 크고 이 미만은$(D_{bm})^{1/2}$$V_s$ 보다 큰 값을 나타내었다. 20$\mu$m 크기의 입자에 대하여 $V_s/(D_{bm})^{1/2}$ 비의 값은 2,355이었다. 3. 해수 중에서 황토입자는 매우 엷은 EDL 두께 (0.4$\mu$m)를 나타냄으로써 EDL repulsive force가 거의 존재하지 않았으며, 상호 접근하는 황토입자는 모든 간격에서 LVDW attractive force가 EDL repulsive force보다 큰 값을 나타내어 항상 용이하게 floc을 형성할 수밖에 없는 조건에 있었다. 4. 해수 중의 황토입자의 $V_s/(D_{bm})^{1/2}$ 비의 값과 total interaction energy로부터 자연상태의 황토입자는 해수 중에서 외부의 강력한 전단력이 없이는 매우 확산되기 어려운 상태에 있으며, 조류의 수평운동이 적은 내만에서는 입자의 물리적 거동은 침강에 의하여 지배되는 것으로 나타났다. 5. 2,000mg/$\ell$ 황토용액에 대한 침강실험에서 대략 $22.5\%$의 황토는 격렬한 교반에도 불구하고 즉시 침강하였다. 황토농도가 400, 2,000, 10,000mg/$\ell$으로 증가함에 따라 침강특성은 개별입자침강(Type I settling or discrete settling)에서 응결침강(Type II settling or flocculation settling)의 상태로 바뀌었다. 이것은 실제 해양에서 황토입자들 끼리 floc을 형성할 정도로 많은 양의 황토를 적절한 분산장치 없이 살포하는 것은 지양해야 하며 동시에 동일한 농도의 황토용액도 살포방법에 따라 분산의 크기가 달라질 수 있음을 의미하는 것이다. 6. PVD 그래프로부터 자연상태의 황토는 급격하게 침강하는 입자와 장시간 부유하며 천천히 침강하는 입자로 구성되어 있었고 후자의 양이 전자의 양에 비하여 매우 적은 상태로 나타났다. 7. 황토를 이용하여 적조를 효과적으로 제거하기 위해서는 자연상태의 황토를 그대로 사용하기보다는 (1) 미세한 입자상태로 분쇄하고, (2) 적절한 살포장비와 분산장비를 사용하여 해수 중에서 황토입자가 넓게 부유 분산하여 적조생물과 충분한 충돌을 일으키도록 해야한다. 이것은 적어도 황토입자를 이용하여 적조를 응집 제거하려고 할 경우 피할 수 없는 기본적 원리가 되며 동시에 황토 사용량을 줄일 수 있는 하나의 방법이 된다. 8. 일반적으로 입자의 크기는 응집 및 흡착반응에 매우 중요한 인자가 된다. 황토입자는 크기가 작을수록 용이하게 분산시킬 수 있으며 더욱 효과적으로 Cochlodinium 적조를 제거할 수 있다. 실제로 어떤 황토입자의 크기가 적조 제거에 효과적인가는 현장실험을 통하여 침강속도, 수평분산범위, 적조제거효율 등을 조사하여 반드시 결정하여야 한다.

  • PDF

입자가 부유된 고온의 제트유동에서 응집과 부력을 고려한 이차원 입자크기 분포해석 (A two dimensional analysis of the evolution of the particle size distribution in particle laden high temperature jet flows including the effects of coagulation and buoyancy)

  • 이방원;최만수;황정호
    • 대한기계학회논문집B
    • /
    • 제21권3호
    • /
    • pp.380-391
    • /
    • 1997
  • A numerical study has been done on the evolution of particle size distribution in particle laden high temperature jet flows undergoing convection, diffusion, thermophoresis and coagulation. The dynamic behavior of these particles have been modelled by approximating the particle size distribution by a lognormal function throughout the process and the moments of the particle size distribution have been used to solve the general dynamic equation. The size distributions of spherical particles in the radial and axial direction have been obtained including the effect of buoyancy. Of particular interests are the variations of geometric mean diameter, number concentration and polydispersity. Results show that buoyancy significantly alters the size distribution in both axial and radial direction. One dimensional analysis for non-spherical particles has also been done and the results have been compared with the existing experimental data.

도시대기중 호흡성 먼지의 이온성분 거동 특성 (Characteristics of Ion Compositions of the Respirable Particles in Seoul)

  • 신은상;강병욱
    • 환경위생공학
    • /
    • 제9권2호
    • /
    • pp.24-31
    • /
    • 1994
  • Aerosol size distribution were determined in Seoul by Anderson sampler from October 1989 to September 1991 for the major ionic species(SO$_{4}$$^{2-}$, NO$_{3}$$^{-}$, Cl$^{-}$, Na$^{+}$, Na$^{+}$, K$^{+}$, Ca$^{2+}$ and Mg$^{2+}$) and TSP( Total Suspended Particles ). The seasonal variations in concentrations and size distribution have been investigated. The size distributions of TSP and each of ionic species were bimodal throughout the year. The size distribution of these ions were divided as follows; (1) fine- mode dominant for SO$_{4}$$^{2-}$ and N%'. (2) coarse- mode dominant for NO$_{3}$$^{-}$, Cl$^{-}$, Ca$^{2+}$ and Mg$^{2+}$. (3) both- mode dominant for TSP.

  • PDF

Visualization of Artificially Deposited Submicron-sized Aerosol Particles on the Surfaces of Leaves and Needles in Trees

  • Yamane, Kenichi;Nakaba, Satoshi;Yamaguchi, Masahiro;Kuroda, Katsushi;Sano, Yuzou;Lenggoro, I. Wuled;Izuta, Takeshi;Funada, Ryo
    • Asian Journal of Atmospheric Environment
    • /
    • 제6권4호
    • /
    • pp.275-280
    • /
    • 2012
  • To understand the effect of aerosols on the growth and physiological conditions of trees in forests, it is important to know the state of aerosols that are deposited on the surface of the leaves or needles. In this study, we developed methods of visualization of submicron-sized aerosols that were artificially deposited from the gas-phase or liquid phase onto tree leaves or needles in trees. Firstly, we used field-emission scanning electron microscopy (FE-SEM) to observe black carbon (BC) particles that were artificially sprayed onto the leaves or needles. The distribution of BC particles deposited on the leaves and needles were distinguished based on the size and morphological features of the particles. The distribution and agglomerates size of BC particles differed between two spraying methods of BC particles employed. Secondly, we tried to visualize gold (Au) particles that were artificially sprayed onto the leaves using energy dispersive X-ray spectrometry (EDX) coupled to FE-SEM. We detected the Au particles based on the characteristic X-ray spectrum, which was secondarily generated from the Au particles. In contrast to the case of BC particles, the Au particles did not form agglomerates and were uniformly distributed on the leaf surfaces. The present results show that our methods provide useful information of adsorption and/or behavior of fine particles at the submicron level on the surface of the leaves.

혼합효과가 DMA와 CPC를 이용한 입자분포 측정에 미치는 영향에 관한 연구 (Study on the Influence of Mixing Effect to the Measurement of Particle Size Distribution using DMA and CPC)

  • 이윤수;안강호;김상수
    • 대한기계학회논문집B
    • /
    • 제27권3호
    • /
    • pp.326-333
    • /
    • 2003
  • In the measurement using DMA and CPC in series, there is some time delay for particles classified in DMA to detect in CPC. During this time, the DMA time-response changes due to the velocity profile of sampling tube and the diffusion of particles in the volume that exists between the DMA exit and the detector of ultra-fine CPC. This is called mixing effect. In the accelerated measurement methods like the TSI -SMPS, the size distribution is obtained from the correlation between the time-varying electrical potential of the DMA and the corresponding particle concentrations sampled in DMA. If the DMA time -response changes during this delay time, this can cause the error of a size distribution measured by this accelerated technique. The kernel function considering this mixing effect using the residence time distribution is proposed by Russell et al. In this study, we obtained a size distribution using this kernel to compare to the result obtained by the commercial accelerated measurement system, TSI -SMPS for verification and considered the errors that result from the mixing effect with the geometric mean diameters of originally sampled particles, using virtually calculated responses obtained with this kernel as input data.

입자 퇴적이 승용차용 정전 필터의 미세 입자 포집 특성에 미치는 영향 (Effect of Particle Loading on the Collection Performance of an Electret Cabin Air Filter for Submicron Particles)

  • 지준호;강석훈;황정호;배귀남
    • 대한기계학회논문집B
    • /
    • 제26권8호
    • /
    • pp.1102-1114
    • /
    • 2002
  • An electret filter is composed of permanently charged electret fibers and is widely used in applications requiring high collection efficiency and low-pressure drop. In this work, the collection efficiency of the filter media used in manufacturing cabin air filters was investigated by using poly-disperse particles when submicron particles were loaded. Long-term experiments were conducted by applying two different charging states, which were spray electrification and charge equilibrium by bipolar ionization. In order to investigate the effect of particle loading in filter media, NaCl particles were generated from 0.1% and 1% solutions by an atomizer. Liquid DOS particles were used to evaluate the effect of liquid particles on the collection efficiency of an electret filter. The results show significant effect of charge amount and size distribution of loading particles on the collection performance of a filter media in submicron region. Smaller particles loaded in electret fibers cause a more rapid degradation in collection efficiency and have lower minimum efficiency with time. The pressure drop of a filter media do rarely increase when the collection efficiency decreases to the minimum value. For the larger particles charged by spray electrification, which have charge amounts more than that of Boltzmann equilibrium charge distribution, the pressure drop of a filter media slowly increases in comparison with that of equilibrium charged particles. For DOS particles it is shown that the charging level of an electret filter severely decreases and the collection efficiency is below 10% in some particle size range.

State-of-the-art progress of gaseous radiochemical method for detecting of ionizing radiation

  • Lebedev, S.G.;Yants, V.E.
    • Nuclear Engineering and Technology
    • /
    • 제53권7호
    • /
    • pp.2075-2083
    • /
    • 2021
  • The article provides a review of the research results obtained during of more than 20 years concerning using the gaseous radiochemical method (GRCM) for detecting of ionizing radiation. This method based on threshold nuclear reactions with production of radioactive noble gas which does not interact with the materials of gaseous tract. The applications of GRCM in the diagnostics of neutrinos, neutrons, charged particles, thermonuclear plasma thermometry, and the study of the structure and dynamics of astrophysical objects, position-sensitive dosimetry of neutron targets with accelerator driving, spatial distribution of the fast neutron flux density in a nuclear reactor allowing the transformation of longitudinal coordinate of neutron flux distribution into a temporal distribution of the radiochemical gas decay counting rate ("barcode" semblance) and measurement of bombarding particles spectra are described. Experimental testing of the described technologies was made on the neutron target driven with the linear proton accelerator of Institute for Nuclear Research of Russian Academy of Sciences (INR RAS).

몬테카를로법을 이용한 실내조도 계산 (Interior Lighting Calculation using Monte-Carlo Method)

  • 김훈
    • 한국조명전기설비학회지:조명전기설비
    • /
    • 제6권5호
    • /
    • pp.19-26
    • /
    • 1992
  • A computer program to calculate the illumination distributions of a room interior was made. The room has a light source with arbitrary intensity distribution. The program follows the paths of the particles from the light sources, and the illumination distribution is calculated by repeating this following to many particles. Monte Carlo method is applied to the decision of the direction of the particle from light source, and the new direction of the reflected particles. Making simulation program on this basis, illumination distributions were measured for various light sources and wall surfaces tocertify the calculated results. As a results, it is known that the calculated distribution would be correct if the size of the light source is sufficiently smaller than the size of the room.

  • PDF

KIVA3V와 SWEEP을 이용한 디젤 엔진에서의 soot 총량 및 입자 크기 분포 예측 (Prediction of Soot Emissions and Particle Size distribution by KIVA3V and SWEEP in a diesel engine)

  • 이재서;허강열
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.129-132
    • /
    • 2012
  • Computation is performed to predict number density, volume fraction and size distribution of soot particles in typical operating conditions of a diesel engine. KIVA has been integrated with the CMC routine to consider turbulence/chemistry coupling and gas phase kinetics for heat release and soot precursors. The compositions of soot precursors are estimated by tracking Lagrangian particles to consider spatial inhomogeneity and differential diffusion in KIVA. The soot simulator SWEEP is employed as a postprocessing step to calculate conditional and integral quantities of soot particles.

  • PDF