• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.853-859
• /
• 2001

The dispersion stability of nano $Y_2O_3-CeO_2$ system was investigated using colloid surface chemistry. Green body of $Y_2O_3$ doped $CeO_2$ was prepared by slip casting in and aqueous system. The dispersion stability of suspension between powders and organic additive was accomplished through electrokinetic behavior of suspension, which was done by ESA apparatus. The dynamic mobility of particles was enhanced when the anionic dispersant of the amount of 1wt% was added. The dissolution of $Y^{3+}$ ion in suspension occurred in the acidic region so that pH value in slurries did not move to below 7.0. In the $CeO_2-Y_2O_3$ system, optimal preparation of suspension was made after adding the anionic dispersant as the amount of 1wt% and pH value of 11.0, and then slip-cast and sintered at 1400$^{\circ}$C, 2 hrs. It appeared relative density of >98% and homogeneous distribution of Y element in depth direction as well as in the microstructure of surface.

• Journal of Magnetics
• /
• v.15 no.4
• /
• pp.159-164
• /
• 2010

The Zn, Co and Ni substituted manganese ferrite powders, $Mn_{1-x}$(Zn, Co, Ni)$_xFe_2O_4$, were fabricated by the solgel method, and their crystallographic and magnetic properties were studied. The Zn substituted manganese ferrite, $Zn_{0.2}Mn_{0.8}Fe_2O_4$, had a single spinel structure above $400^{\circ}C$, and the size of the particles of the ferrite powder increased when the annealing temperature was increased. Above $500^{\circ}C$, all the $Mn_{1-x}$(Zn, Co, Ni)$_xFe_2O_4$ ferrite had a single spinel structure and the lattice constants decreased with an increasing substitution of Zn, Co, and Ni in $Mn_{1-x}$(Zn, Co, Ni)$_xFe_2O_4$. The Mossbauer spectra of $Mn_{1-x}Zn_xFe_2O_4$ (0.0$\leq$x$\leq$0.4) could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. For x = 0.6 and 0.8 they showed two Zeeman sextets and a single quadrupole doublet, which indicated they were ferrimagnetic and paramagnetic. And for x = 1.0 spectrum showed a doublet due to a paramagnetic phase. For the Co and Ni substituted manganese ferrite powders, all the Mossbauer spectra could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. The variation of the Mossbauer parameters are also discussed with substituted Zn, Co and Ni ions. The increment of the saturation magnetization up to x = 0.6 in $Mn_{1-x}Co_xFe_2O_4$ could be qualitatively explained using the site distribution and the spin magnetic moment of substituted ions. The saturation magnetization and coercivity of the $Mn_{1-x}$(Zn, Co, Ni)$_xFe_2O_4$ (x = 0.4) ferrite powders were also compared with pure $MnFe_2O_4$.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.262-272
• /
• 2005

This study was undertaken to obtain design concentrations for the natural system treating stream water flowing into estuarine lake(Sapgyo). This lake has three major, so called, national-class streams: one is Gokgyo flowing through two medium-size municipal areas and the others are Muhan and Sapgyo placed in mostly rural area nested with some small towns. The results of three year's investigation showed big changes in water quality during the period between dry and wet seasons. Nitrogen concentration usually decreases as the flow rate increases. The change of phosphorus concentration in Gokgyo was the same pattern as nitrogen, but in other two streams it was inversely related with flow rates. This is probably due to the chemical property of the particles washed out from the different stream basins during wet season. It was found that about 40 to 60% of the total nitrogen are in soluble form and on average, 35% of the total phosphorus consists of dissolved-P. Representative concentration of these streams has to be separately determined based on dry and wet season. TDS and SS could be indicating parameters useful to depict and characterize a change of water quality with respect to flow rate because their measurement is easy and also includes a small analytical error. TDS values measured during dry season are related with high nitrogen concentration while during wet season, SS values effectively reflect a high concentration of phosphorus. For design purpose, cumulative concentration distribution graph presented in this paper can be directly or indirectly applied to other streams through a brief comparative and verificative study.

• Journal of the Korean Chemical Society
• /
• v.45 no.4
• /
• pp.341-350
• /
• 2001

Aluminum Hydroxide was employed as a thermal retardent and flame retardent for Chloropolyethylene (CPE) rubbery materials which is the construction material of automotive oil cooler hose. and then cure characteristics, physical properties, thermal resistance and flame retardation of compounded rubber were investigated, and optimum mixing conditions of rubber and flame retarding agent were deduced from the experimental results. CPE rubber material which has excellent properties of chemical corrosion resistance and cold resistance and inexpensive in price was used to prepare rubber specimen. The by-product of ething, produced from the process of surface treatment of aluminum was processed to aluminum hydroxide via crushing and purification, which is characterized by XRD, PSA, SEM and ICP-AES techniques in terms of phase, size, distribution, morphology and components of particles and then mixed to CPE rubber materials in the range of 0~80 phr. Hardness, tensile strength, elongation and thermal properties of compounded rubber specimens were tested. The optimum mixing ratio of rubber to additives to give maximum effect on thermal resistance and flame retardation, within the range of tolerable specification for rubber materials, was determined to be 40 phr. The flame retardation of CPE rubber materials was found to be increased by 5 times at this mixing ratio.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.527-531
• /
• 2016

Emulsification is a fundamental process of cosmetics manufacture which produces stabilized emulsion by dispersing the liquid from the one side to the other by adding an emulsifier in an immiscible liquid. Various types of emulsifiers can produce various cosmetics. In this study, we evaluated the stability of emulsifier by measuring variations in the viscosity, particle size and particle size distribution. HLB values of nonionic emulsifiers which are used in this paper are 12.9, 12.9, 12.6 and 12.5 for EMU-01, EMU-02, EMU-03 and EMU-04, respectively. All types of emulsions showed an increase in the particle size and a decrease in the viscosity with the time. Also they showed a decrease in the particle size and an increase in the viscosity with respect to increasing the stirring speed. However, the stability of emulsions up to 56 days was secured by observing the non-separation of emulsions. In addition, the viscosity of the emulsions was measured in the order of EMU-01 > EMU-02 > EMU-03 > EMU-04 while the size of particles was measured in the order of $EMU-01{\approx}EMU-02$ > $EMU-03{\approx}EMU-04$. This indicates that our emulsion can be potentially used for preparing a cosmetic facial cream.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.97-109
• /
• 1983

In this study, the effects on the soil compaction were investigated through the various testing method by changing the number of layers, the number of blows per layer and drop height. The results obtained in this study were summarized as follows. 1. Soil compaction was largely influenced by maximum grain size of soil in case of small testing mold diameter. 2. The compaction effect showed best in the well graded soil. In this test, compaction effect showed the best value in the soil which contained about 30~40% of particles finer than No. 200 sieves although it would vary according to the content of coarse grained soil. 3. Though the compaction method was changed at the level of compaction energy fixed, the effect of soil compaction showed little. 4. The increment of compaction energy increased the effect of soil compaction, but over a certain limit the soil compaction showed little on the effect. 5. In the method to increase the compaction energy for the purpose of the most reasonable effect, the soil compaction effect was differently shown according to the grain size distribution of the soil.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.6
• /
• pp.444-452
• /
• 2009

Textural parameters were calculated from the surface sediments collected from Jinu-do beach in Nov. 2005 and May 2006. In Nov. 2005 and May, 2006, the grain size distribution of surface sediments shows that the mode of $3.0\phi$(i.e., 0.125 mm) dominated the west beach of Jinu-do, but in the east beach the mode of $3.0\phi$(i.e., 0.125 mm) decreased and the mode of $2.5\phi$(i.e., 0.177 mm) was apparently distinct, resulting in the more coarsening trend. Mean grain size of surface sediments also indicates little difference in the west beach between two investigations, but the increasing difference between mean grain sizes in the east beach, showing more coarsening pattern. Such seasonal pattern corresponds to the positive skewness in the east beach in May, 2006. As a result, after the winter in 2005, the surface sediments in the west beach of Jinu-do experienced a little variation, whereas the apparent coarsening of surface sediments occurred in the east beach by removal of $3.0\phi$(i.e., 0.125 mm) fine-grained sand particles. The observed seasonal change may be attributed to the different hydrographic condition and sediment delivery/removal on the surface sediments between the west beach and the east beach of Jinu-do through the increased precipitation and more freshwater discharge from the Nakdong River during the summer and the intensified wave and tide during the winter in the Nakdong River estuary.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.590-598
• /
• 2001

SiCp/pure Al and SiCp/2024Al MMCs were fabricated by in-situ VHP process designed specially just in this study which is composed of the vacuum hot press at range from R.T. to $500^{\circ}C$ and the continuous extrusion without canning process at $520^{\circ}C$. It was investigated the effect of SiC particle size, volume fraction and extrusion ratio on the tensile properties and micro structure in auf composites. In case of the 10:1 extrusion ratio, but SiCp/pure Al and SiCp/2024Al composites were shown a sound appearance and a good micro structure without crack of SiCp as well as uniform distribution of SiCp. However, in case of the 16:1 extrusion ratio, the number of cracked SiC particles more than increased in a higher volume fraction composite and 2024Al matrix composite compared with pure Al matrix one. The tensile strength of the composites reinforced smaller SiCp was higher than that of the bigger SiCp reinforced in same volume fraction and extrusion ratio.

• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.397-406
• /
• 2012

During the 2nd Ulleung Basin Gas Hydrate Drilling Expedition (UBGH2) in 2010, gas-hydrate-bearing sediment cores were recovered at 10 drill sites. Base, on Infrared (IR) thermal image and grain-size analysis of the cores, three distinct types of gas hydrate are classified: Type I (fracture-filling in mud layers), Type II (disseminated in mud layers), and Type III (pore-filling in sand layers). Types I and II gas hydrates occur in mud as discrete veins, nodules or disseminated particles. Type III fills the pore spaces of the sand layers encased in mud layers. In this case, the sand content of hosting sediments shows a general linear relationship with gas hydrate saturation. The degrees of temperature anomalies (${\Delta}T$) from IR images generally increase with gas hydrate saturation regardless of gas hydrate occurrence types. Type I is dominantly found in the sites where seismic profiles delineate chimney structures, whereas Type II where the drill cores are composed almost of mud layers. Type III was mainly recovered from the sites where hemipelagic muds are frequently intercalated with turbidite sand layers. Our results indicate that gas hydrate occurrence is closely related to sedimentological characteristic of gas hydrate-bearing sediments, that is, grain size distribution.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.6
• /
• pp.423-431
• /
• 2015

KIOST-HYU joint acoustics experiment was performed on the western shallow water off the Taean peninsula in the Yellow Sea in May 2013. In this paper, mid-frequency (6~16 kHz) bottom loss data measured in a grazing angle range of $17{\sim}60^{\circ}$ are presented and compared to the predictions obtained using a Rayleigh reflection model. The sediment structure of the experimental site was characterized by multi-layered sediment and the components of the surficial sediment consisted of various types of particles with a mean grain size of $5.9{\phi}$. The model predictions obtained using the mean grain size were not in agreement with the measured bottom loss, and those obtained using the grain size of $4{\phi}$, which was estimated by an inversion process, showed a best fit to the measurements. It would be because the standard deviation of the gain-size distribution of surficial sediment is $4.3{\phi}$, which is much larger than those of other areas around the experimental site. Finally, the model predictions obtained using the geoacoustic parameters estimated from the inversion process for the surficial sediment layer and those corresponding to the mean grain size of $1.3{\phi}$ for lower layer are reasonably agreement with the measured bottom loss data.